Hi there, I removed the Cooler off the CPU & renewed the paste without disturbing any other parts in my big box with plenty of room. When I pressed the box SW to boot up, nothing happened except that the CPU, PSU & a case fan run for a second then stopped. This happens each time even if I keep the SW pressed. I reseated again the CPU chip, the two Ram sticks, the HD cables & every other cable in the box. Still the same. Can anybody give me any ideas, besides ofcource chucking the lot in the bin !. PC Home build Asus A8N 32 sli deluxe Bios AMI 64-1009 Chipset nF4-sli AMD 3.5+ (2.20ghz) Corsair twinx 1024-3200 DDR400mhz SDRAM 2x512mb MSI 6600gt 128 PCI-E Maxtor sata 160mb PSU 400w XP sp2
Ashamed to say I bent one of the CP chip pins, never before but there is always a 1st time. And to think that I am extra carefull to see & hear the chip fall freely in the holes. Anyway managed to straighten it & fires up OK now, & is 5c cooler now with the new paste