Hi man another NZ person yeppy. got case from http://www.legionenterprises.co.nz/ get most of my parts from him. He can get lots of thing but hasnt got them listed so just ask him and i would say he can get it i have done that he is the man.
Took a couple photos of my pc desk. On the left you can see my joject pc that im doing work log on this site. two 22" lcd widescreens had both hooked into pc but got new xbox 360 so using one screen for it. Door open. LOL wood under front wheels as case is to big for desk. 5.1 suround sound up top is my HP printer scanner copyer and my camera bag.
true. i have mine in front of me too in the end of the day, all that matters is there's sound coming out of them
haha long case huh xD. I have a 6.1 setup, turned 5.1 though. And all the speakers are in front of me except for two which are on my extreme left and extreme left. Semi surround Might want to get a bigger table for the computer? Just to compliment the two screens hehe.
lol yeh speakers all 2 are behind the screens. System pumps and bassy so not to worryed as long as i have sound. Tidyed up room tonight and moved pc case on to a table on the left side of the pc desk. More room now and dont have that block of wood under the front wheels plus i have my draw back in its place. lol Will get a photo of what it looks like this weekend with pc on and xbox on.
lol don#'t worry. i was making a hedgehog yesterday, my room looks like WWIII just started. dust everywhere. gosh. Tip: if you ever make something out of coconut shell, NEVER use dremel to cut it. and keep vacuum cleaner next to it at all times. lol
nah. just a gift for a friend. i could fit epia PX10000 and a CF card for a hard drive if i found a bigger shell. Still looking though. all the coconuts i come accross are just too small.
yeah. would look good in a wooden interior. if i do find it i'll definitely make it Do you have anything special planned for your new lian li?
Got my 2 SATA raid cards today got 4x 450mm sata cables with them not that i can use them lol short by a long shot will sell them. ST Lab A-224 4-Channel Serial ATA RAID PCI Card: Chipset: Silicon Image 3114. Bus Interface: PCI bus – 32 bit. Compliant with PCI Specification, Rev. 2.3, 32 bit, 33/66 Mhz. Compliant with Serial ATA 1.0 specification. Provides four independent channels to support up to four Serial ATA drives. Supports RAID0(striping), RAID1(mirroring), RAID5(Parity RAID), RAID 0+1(mirroring+striping) and Concatenation modes. HDDs function normally when not in RAID sets. Supports SATA up to 150MB/Sec. OS Supports : Supports Windows® 2000, XP/2003 32/64 bit, Vista 32/64bit 4x Internal SATA. 2x External SATA. PCI SATA raid card Both cards Installed Screen shot. the last one on the list is the onboard sata raid on mobo. Insides going to install a grill on the rear 120mm fan so no wires or fingers go into fan lol. Going to install grills on both 80mm fans so no wires or fingers go into fan lol. Kool photo Setup pc and xbox have a screen each Sub and that oh and my project case. white thing is 2 bay xbox battary charger. Took the photos fast as packing to go on a hollyday. Still got to get the sata cables and do more cable management.
Ok people havent done a lot to my pc lately been on hollyday and on xbox playing GTA4 man its a nuts game. Going to work on my sata power cables next as the thermaltake PSU has straight sata plugs im going to change them to the T sata plugs and remove sum of the xtra cable in the middles of each sata plug as there is way to long. So it will be nice and tidy. Also with the sata cable im going to install a 6 pin plug in the cable just out of the psu so it will make it easy to to cable management and if i need to i can remove the PSU without removing all the sata power cables. This is a photo i found on net of the sata cables. I will be using that style of sata power plugs but sorten the cables in the middles of each sata plug. Just a couple screen shots. CPU Type: Intel Celeron D 315, 2266GHz Overclocked to 2900 GHz (17 x 171) Motherboard Name: Abit IC7-G Ram Name: 4x GeIL CL3-4-4-DDR 400 Video card name: Asus RADEON 9600 SERIES 256mb Driver name: 2x ASUS DRW-1814BL HDD name: 2x WDC WD800BB-55JKC0 80gb IDE HDD name: 6x WDC WD800AAJS-00PSA0 80gb SATA PCI Device: 2x PCI Silicon Image SiI 3114 SoftRaid 5 Controller 3.5" Device: Floppy drive 3.5" Device: card reader Adaptors: 2x Lian Li MF-515 5.25" to 3.5" bay adaptors Adaptors: 2x Lian Li C-01B drive covers PSU name: Thermaltake toughtpower 600w CPU cooler: Thermaltake sonic tower Rev 2 Mobo and grahics card cooler: Zalman Northbridge Flower Heatsink ZM-NBF47 Cables: AC Ryan Round cables and cable sleeving Fans: 2x 80mm Lian Li, 3x 120mm Lian li OS system: Windows XP POR SP3 I also have a 250gb sata HDD in system that i am going to remove sum time.
Hi sorted cables out little more ordered my 750mm sata cables and trying to get T sata power plugs. CPU cooler shot. Coolers More cleaned up. Ram shot. Top back. Bottom back. Side fan for grahics card cooler.
Just but a 120mm fan on the cooler to test to see if it will drop temp. anly only did 2c. but it looks cool. its a stock NZXT fan silent but dont push much air. Couple photos. going to remove it as its not worth running it if its only 2c cooler. lol. mite test another fan on it later mite try one of my Yate loom 120mm high speed highs on it. Fan on cooler. The blue in the photo is the HDD led its a bright sucker. Mobo red light there is also a green led there to. Side vent. In the dark. Couple cables need move as in the way.
ummm nop. lol its staying boring stock. yeh thats right not modding it lol. mint rip out the 2 80mm fans as thay are load even running them at 50%. !!!BUT!!! I have a lian li PC-V1000 on its way to me that im going to mod to hell. Want to do sumthing like this. I have a side panel with the window in it on its way to me to. Thinking about cooler it like this. But mite leave the bottom 120mm fan out and do sumthing like this.
So, if you press CTRL+S or F4, how does that work? Do you get a list where you pick which one you want to configure?
