The case I will modify is the BitFenix Pandora (BitFenix.com » Products » Chassis » Pandora). The version that I have chosen is in aluminum color without window plexy but with BitFenix ICON ™ (a nice Programmable Display post on the front of the case) some pictures:
The radiator for the liquid cooling system will be the same that I used inWarboy's Bitfenix Neos e fury... cioè l'alpahcool da 360 mm. Will be placed in front of the case BitFenix Pandora along with three fansBitfenix Spectre LED I'll have to make some changes with the dremel BitFenix Pandora
Cutting the plate of the chassis, cutting a piece of plastic top and making the holes for the fans on the front, I was able to fix the radiator .. Here are some photos:
Thanks!! after solving the problems to fix the radiator from 360mm at the front, we pass on the airbrush case... The style that I have chosen is similar to RAT ROD, vintage cars prepared and restored most of all in the functional part is not taking care of the very appearance and leaving rust and dents ... I begin to make you see the outside of the case ... I applied the AUTO AIR COLORS iridescent teal lustre plus CREATEX TRANSPARENT BLUe For the perforated mesh of the top of the case I opted for the classic chessboard on which stands the logo BitFenix
now the hardaware is: MB: asrock 960GM-VGS3FX Processor: AMD FX6300 Ram Kingston 4Gb x2 1600Mhz Ddr3 Hard disk 320 2.5" Western digital Caviar Black Sapphire HD 7730 2GB DDR3 Power supply BITFENIX fury 550G
