Final pics. [IMG] [IMG] [IMG]
It's my understanding that the client just happens to have an extra ATX PSU lying around. That's all.
I love the versatility of t-slot extrusion. Threaded "holes" can be added anywhere along a slot by using set screws to fasten two nuts around a...
Recently I've built a few large external radiator boxes: [IMG] [IMG] [IMG] This build log is for an external radiator box to house a 560...
Nothing happens after I choose a a new avatar jpg from my PC. After doing so, then selecting the "Okay" button, does nothing. I have to "Cancel"...
I like to use 0.5-inch/15mm tall threaded spacers, which avoids having to cut threads and slots for the bottoms of expansion card brackets.
My sincere condolences.
In order to ensure that the flat head bolts in the top sheet would sit perfectly straight and flush, I drilled slightly over-size through holes in...
Finished the lower portion of the back sheet, which involved installing the PEM nuts, trimming the PSU mounting plates to the final size and...
Thanks guys. [img] [img] [img]
Thanks. We decided not to paint the inside in order to reduce cost. An unexpected bonus from that decision is the striking contrast between the...
Powder coated parts have come back from the painter and final assembly has begun. [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]...
Drilled out the holes for the vandal resistant switches and fastened the front sheeting to the case. [IMG]
Thanks Waynio!
Boddaker's build thread for his guitars is here.
Awesome job Boddaker! I posted a "just pictures" thread of the drum PCs I built for this event up in the Modding forum.
Here are some final pics of three drum cases (with full rigs featuring their new APUs with FM2 socket motherboards by ECS along with Fractal PSUs)...
I finished fabricating the back of the case, which consisted of drilling mounting holes through the motherboard trays and PSU mounting plate,...
Performed the mind-numbing task of fastening the bottom and top sheets to the case frame via flat head socket cap screws. Through and countersink...
During final assembly (before paint) some rework is inevitable. With this case, early on in the build, it was widened to accommodate the front...
Separate names with a comma.