When you say shorting do you mean in my HS bodge. Since the bolts thread into plexiglass on the back of the board, the only place for a possible...
I was able to fix the bending problem with a little Bit-Tech ingenuity. A couple of plexi scraps, a tap, some old HS mounting bolts and we're...
Thanks, I could see that working with a full ATX mobo, but this is an ITX board and the 4 mounting holes are very close to the 4 corners of the...
So I went out today & bought another Intel HS (the one on the right). Thinking the arms might give it a little more flexibility so it would not...
Hello, I need some learned opinions & can't think of a better place to go. I have a Zotac NForce 630i-ITX mobo (socket 775), a P4 SL7PU 3...
While searching for design ideas for a new chair/recliner/cocoon I came across this pretty cool design. http://www.nethrone.com/ They are...
You might also consider using a 1U supply. They are much slimmer but longer. I've used 2 in my current project to allow for more freedom in...
Mostly used now for auto restoration, here are three sources. http://www.eastwoodco.com/jump.jsp?itemID=106&itemType=PRODUCT...
And don't forget to wear a dust mask when you sand the fiberglass :eyebrow:
Check at your local auto parts or hardware store for trailer wiring (campers, utility, motorcycle, & horse trailers). You can often find it in...
The XPR looks like a pretty decent tool and dremel is known for good quality. Like any tool, it depends on how well you maintain it and how hard...
Have a look at McMaster-Carr (www.mcmaster.com) under perforated sheet. They have various sizes of round, square, hex, diamond, & other shape...
Not to my taste, but as someone else said, you gotta give them top marks for trying something completly different! :thumb:
How bout this ? How about M4, 80 mm, flat head, phillips drive, zinc plated! McMaster Carr # 91420A290. In stock @ 9.99 US per pack of 25. You...
I really prefer the dark fittings. :thumb: I'd watch for leaks though, in case you removed a liiittle too much material when you re-tapped those...
How about using some threaded rod with a nut at both ends? Comes in 1 meter lengths. http://www.mmsacc-stainless.com/metric/html/metric_rod.htm...
Looks like you may have a fair amount of dust built up on the fins of the cpu hs? that would really affect your temps. A bit of wire management...
I know just enough to think this device may be of interest for fan control. Came across it in a trade pub. Maybe it is the answer to some of the...
Interesting, except the price seems to have gone up to 67.99 now that they know they have a good thing.
Really amazing work !!! I had a few thoughts about a car themed front bezel, any chance of a how to on the fiberglass over foam, how you made &...
Separate names with a comma.