Plug it into a wireless router with USB and use the router as a NFS server? http://openwrt.org/
If you don't mind low quality, get a portable LCD TV and a small TV transmitter (RF modulator and some amplifiers).
I have a cheap MP3 player that uses the WM8759 DAC, and I wonder if it's possible to somehow convert the signal to a format that can be sent to a...
A single RGB LED can produce millions of colors...
Isn't there a signal from the alternator that operates the alternator check light circuit? Couldn't you use that signal to latch on the relay?...
You may also be able to remove a terminating resistor on one display and daisy chain them. (Make sure the display with the teminating resistor is...
http://www.zellestyle.com/catalog/1337.html It'd be interesting if we could somehow ask for dud parts (that do not work right but look fine) from...
http://www.mariposahd.tv Available 24/7 in HD worldwide through the use of Bittorrent.
Just install Debian. It has lots of games, many of which are very good. All for free, along with many other free programs. One more reason to...
I tried putting OpenWRT (squashfs) on my Belkin F5D7230-4 (v1444), and it doesn't work. Can anyone help? Below is what the text terminal shows:...
You can probably JTAG it. I repaired a router using JTAG once. Or is the chip bad? The easiest way to find one of those chips is to take one from...
I got the PCM2902 USB audio chip working (the USB interface at least), but I have some questions. For the S/PDIF input (coax), should the receive...
http://ktechlab.org/ Enjoy! I'll try it out on my Athlon 64 running Debian 3.1.
There is an 8GB CF type II card, and I believe 12GB is available for specialty applications....
http://shop3.outpost.com/product/4575027?site=sr:SEARCH:MAIN_RSLT_PG Is that one any good? I noticed that it uses a metal tip, instead of the...
Connect one of the wires in series with the switch.
Are you sure it's not interference to the signal cable? No amount of power filtering can fix that.
Try to use a ground as close to the signal line as you can, or the unshielded part of the cable will mess up the impedence match. Try to keep it...
The center connector is the signal, the braid is ground. I actually made a really good antenna from a piece of coax (left over from a router mod)...
PVC will hold up nicely. Remember that it stays together in plumbing at as much as 100PSI of pressure, with some high peaks due to water hammer....
Separate names with a comma.
