They will save about $190 million a year by cutting those jobs. It's totally common for a company to save on salaries first when in need. And...
Joe is right, for the M3 screw to pass through, you want something like 4mm drill to be comfy. I thought you wanted to tap. :) If you tape...
Don't be afraid to just try it. Some trial and error makes up for a good experience in the long run. ;) And yeah, try it out on some junk piece...
Just mark your holes directly on the tape, since you have to tape the panel anyway (to prevent scratches while working with it). As for the...
You need a 2.5mm standard metal drill bit for the hole, not 3mm. Tape the area, mark the spot, get a pointy tool and mark the center of the hole...
I didn't mention a 90° mounted mobo, because the OP didn't make clear what case he has and/or if he wants the ideal theoretical cooling or one...
Seems not really worth to overclock this one, does it? The performance gain is really small, compared to an even higher power draw.
There's a review with a pre-production sample of it over here. Seems like it it's pretty comparable to an H100. Not quite clear which fan...
Aside from all the general stuff for good temps; a side fan can do a lot for GPU temps. However, it's possibly adding a bit of noise, too. Since...
If paint can't go with a specific type of paint, it's noted on the paint. For instance, I have some paint that doesn't like to be painted with...
You kinda gave yourself the solution. You have to handle the spray can "wrong". -don't shake it enough -start to spray directly on your...
Here's the new outer shell for the case. No cutouts yet, just some bends and screws. :) Using M3 Thumbscrews all over the place, at least until...
That must have taken the hell a lot of screws. Stunning work, love the paint job! :D
Yeah, definitely. :)
I remember seeing this a few month ago. Anyway the price point is new. They really should have made it compatible with some of the bigger...
You could try to "disassemble" a permanent marker to reach less accessible parts. Or a less adventures way, get some model paint (from Revell or...
Fooled around a little bit more with paint. Dismissed the scratched red, sticked with the "dusted" red and added a few paint drops instead....
Love the small footprint! Top job :rock:
This makes me feel like I should be quite a little more bold on weathering down and roughing up my scratch build, that to is aiming for a rugged...
Thanks a lot! :) Played around with paint for the first panel. Aiming for a rough, rugged look. Using spray cans only. Basically it went like...
Separate names with a comma.
