View Single Post
Old 15th Apr 2011, 13:19   #45
Javerh
Topiary Golem
 
Javerh's Avatar
 
Join Date: Sep 2006
Location: (1/k)*(F(t)-m*ddx-c*dx)
Posts: 1,045
Javerh has yet to learn the way of the DremelJaverh has yet to learn the way of the DremelJaverh has yet to learn the way of the DremelJaverh has yet to learn the way of the Dremel
Quote:
Originally Posted by Djayness View Post
This information relates to those using a CNC.

Machine: 10,000rpm

Single Pass: 3mm

Tool: Straight cutter, 30 degree rake

Speed: 4000mm/min

Direction of Cut: Climb

All these factors combined = incredible finish on acrylic cuts.
You might want to call the speed as feed instead. Usually speed relates to tool diameter and spindle rpm. So for your case someone could argue that for that speed and that rpm, you are using 0.8mm diameter end mill. Actually, what tool are you using?
__________________
Project: Seawolf
Project: 1
Project: Flux (est 2012)
Modders make project logs. Project logs make mods. Mods make modders.
Javerh is offline   Reply With Quote