bit-tech.net

Go Back   bit-tech.net Forums > Technology > Hardware
Reload this Page Watercooling Which QDC for 1/2"ID, 3/4"OD tubing? (with diagram)
Register FAQ / Rules Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
Old 18th Jan 2012, 14:29   #1
dead beat
Rippin six 4 life
 
dead beat's Avatar
 
Join Date: Feb 2009
Location: East Grinstead UK
Posts: 1,260
dead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for president
Which QDC for 1/2"ID, 3/4"OD tubing? (with diagram)
I'm struggling to find the type of QDC's that I'm looking for. I'm looking to run the QDC through a bulkhead, but as soon as it passes the bulkhead, it needs a 90 degree angle to clear the radiator. Preferably I would be able to directly mount a 90 degree compression to the QDC as soon as it leaves the bulkhead. However, I'm finding it hard to locate QDC's with an internal thread to mount the compression.

Here is a diagram:




Does anyone have any ideas?

Cheers
__________________
ASUS ROG Maximus IV Extreme-Z68 | Intel i7 2600K @ 5.1Ghz | 2x EVGA GTX680's SLI (water) | 8GB Corsair Dominator GT RAM @ 1866Mhz | Corsair AX1200 PSU | Crucial M4 256GB SSD | 2 x Samsung Spinpoint F3 HDD's | Dimastech Easy bench Dual V2.5 | Dell 3007 WFP-HC 30" monitor | Custom dual radiator waterloop
Photography gear: Nikon D800 | Nikkor 24-70mm f2.8 | Nikkor 70-200mm f2.8 VRII | Nikkor 35mm F2/D | Nikkor 50mm 1.8D | Nikkor 85mm 1.8G | Nikon TC-14E II | SB-700 Speedlight
Last edited by dead beat; 18th Jan 2012 at 15:27.
dead beat is offline   Reply With Quote
Old 18th Jan 2012, 16:36   #2
Big Elf
'Black Noise'
 
Big Elf's Avatar
 
Join Date: Apr 2009
Location: Westcliff on Sea
Posts: 1,722
Big Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for presidentBig Elf should be considered for president
Only thing I can think of is to use a normal bulkhead fitting with a 90º compression on one side, a straight compression on the other with a short length of tubing going to a QDC. Trouble is it'd be long and ugly.
Big Elf is online now   Reply With Quote
Old 18th Jan 2012, 17:50   #3
dead beat
Rippin six 4 life
 
dead beat's Avatar
 
Join Date: Feb 2009
Location: East Grinstead UK
Posts: 1,260
dead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for presidentdead beat should be considered for president
Cheers mate. I've managed to sort it out with this...

https://www.koolance.com/water-cooli...product_id=946

this

https://www.koolance.com/water-cooli...product_id=880

and this

http://www.scan.co.uk/products/phoby...oogle+shopping
__________________
ASUS ROG Maximus IV Extreme-Z68 | Intel i7 2600K @ 5.1Ghz | 2x EVGA GTX680's SLI (water) | 8GB Corsair Dominator GT RAM @ 1866Mhz | Corsair AX1200 PSU | Crucial M4 256GB SSD | 2 x Samsung Spinpoint F3 HDD's | Dimastech Easy bench Dual V2.5 | Dell 3007 WFP-HC 30" monitor | Custom dual radiator waterloop
Photography gear: Nikon D800 | Nikkor 24-70mm f2.8 | Nikkor 70-200mm f2.8 VRII | Nikkor 35mm F2/D | Nikkor 50mm 1.8D | Nikkor 85mm 1.8G | Nikon TC-14E II | SB-700 Speedlight
dead beat is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 19:48.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.

bit-tech.net - Top