Case Mod "Cross-Section" by Paladin

[Paladin | Patrick]

i am on air: http://www.complex-mods.de/index.php...=157&Itemid=51

[Paladin | Patrick]

Today there are only a small update.
I now have the last two holes made ​​in the case.
Then come now all the details on the hardware.
Now I wait for the parts of the watercooling

First, I have again the board was a little revision, then release it

[Paladin | Patrick]

I'm just gonna go for an hour or longer in the workshop. The stuff of Aquatuning is coming today. There will sometimes break the radiator

ON AIR at LiveCam (5 min)

[rak500]

that is such a cool idea! very inventive!
can't wait to see this unfold! all the best mate!

[Paladin | Patrick]

Thanks

On Friday, a nice package of Aquatuning has arrived.
Many thanks again to this place for it.



Some will make the heart bleed now when they see what I do with this stuff
One half of the radiator is closed down. The water then passes purely on one side, and back out on the other side. The direction of opening the channels are then soldered.

Mark first ...



...and cut.
A channel I have been honing their length. The material was then so thin that was nothing more, so i just put a zip tie in the channel.



I have sometimes made ​​a connection. First stuck and then cut with the angle grinder and polished.





So, that's it again...

[Cleveland216]

Love the theme and the work. Good job so far. I would say its original too. I'm watching.

[nagyizom]

Haha, great idea!

[Cown]

You my friend, are insane

Nice work, looking forward to seeing how this evolves

[330td]

What a sick project, keep up the good work

[B.o.B]

I can't help but cringe every time I see a new cut.... great work, this looks mental (in a good way)

[Paladin | Patrick]

Unfortunately, nothing is happening at the moment because I'm make our house the concrete foundation for the winter garden.
Here are some pictures about this:
http://we-mod-it.com/board1-modding/...nja/#post12534
If it is raining again here it is also continue

[Paladin | Patrick]

So now the uptade comes from my data destruction yesterday

So first clamp to the table and mark ...



And then purely plow with the 230 mm angle grinder: D


This is the result.





Since everything has some merged had to be disassembled first time. Then I could start with the filing and sanding the parts.



The coil makes me most concerned, since the individual layers are as gone extremely apart. It should normally be like right on the part



If I'm under this gehts week back a little further.

[TadZilla]

So much awesome destruction! Great idea for a build. Looking forward to the finished project

[Asouter]

Cutting stuff up shouldn't be this interesting...but it is