bit-tech.net

PabloFunky · 21st Oct 2012, 08:56

I was always told, never put things where they dont belong, but this rad placement is an exception i think.

bulldogjeff · 21st Oct 2012, 20:44

Quote:

Originally Posted by PabloFunky

I was always told, never put things where they dont belong, but this rad placement is an exception i think.

Thanks Pete, I tried to get it in the case and is just wasn't going to happen so it went under it. Keeps it all nice and discrete as well.

bulldogjeff · 26th Oct 2012, 22:43

I've just been adding up the cost of this build and so far based on donations and stuff I had laying about gathering dust I am running at about £120, and one things for sure it will finish at under £150.. Modding on the cheap.. haha, love it

I won't be so lucky on the next one thats for sure lol

Teelzebub · 26th Oct 2012, 22:59

So we going to get some more updates this weekend then?

bulldogjeff · 28th Oct 2012, 17:35

Quote:

Originally Posted by Teelzebub

So we going to get some more updates this weekend then?

Not going to make any progress this week end, but I'll be putting the hardware in dure the week so expect a few updates. Maybe even be complete by the end of the week.

bulldogjeff · 30th Oct 2012, 18:28

The last few bits have just arrived today.. Now I can put it all together ...Wooooohooooo

bulldogjeff · 4th Nov 2012, 15:44

Just about to put it all together and I can't find any fittings

Got loads of 1/2 compresions, no 3/8 and 7/16 tubing. All non compatible. I think the route I'll have to go is ti squash the 7/16 tube on to some 1/2 inch barbs.
Oh well at lest I'll know that once that tubing goes on it ain't coming off ...lol

Blarte · 5th Nov 2012, 13:07

Quote:

Originally Posted by bulldogjeff

Just about to put it all together and I can't find any fittings

Got loads of 1/2 compresions, no 3/8 and 7/16 tubing. All non compatible. I think the route I'll have to go is ti squash the 7/16 tube on to some 1/2 inch barbs.
Oh well at lest I'll know that once that tubing goes on it ain't coming off ...lol

washing up liquid, boiling water.. just make sure if its on compression fittings the compression bit is padded out with ptf or something (that plumbers putty works great)

bulldogjeff · 7th Nov 2012, 20:14

Got all the barbs now, Just tested one they have some serious grip. Won't let go unless I slice the tubing.

Looks like it's time to build a computer

KrunchR · 7th Nov 2012, 20:48

Yay! Now hurry up.

bulldogjeff · 8th Nov 2012, 16:49

Quote:

Originally Posted by KrunchR

Yay! Now hurry up.

It will all be done and dusted now very soon, maybe even by next week end.

bulldogjeff · 12th Nov 2012, 22:13

I've been really busy lately but I have found some time to get started on the inside, mainly routing all the water cooling ..

To start with I have a matching pair of these...Although the blocks have different logo's on them, they are identicle, both GPU's are factory over clocked, but I'll be giving them a bit more.

So there you have it. A nice bit of progress.

I just need to braid a few cables, get it all wired up and leak tested and I'm done.

Probably be all finished with in the next few days.

Thanks for looking

Teelzebub · 12th Nov 2012, 22:15

Nice one Jeff looking good mate.

YEHBABY · 12th Nov 2012, 22:20

Looking very good Jeff

bulldogjeff · 12th Nov 2012, 22:36

Quote:

Originally Posted by Teelzebub

Nice one Jeff looking good mate.

Quote:

Originally Posted by YEHBABY

Looking very good Jeff

Thanks a lot lads. The pics are a bit crap as I done them on the phone because my camera ran out of batteries.

Spreadie · 13th Nov 2012, 07:51

An update! Woohoo!

Looking forward to the finished article, Jeff. I'm sure Dylan can't wait.

bulldogjeff · 13th Nov 2012, 21:14

Quote:

Originally Posted by Spreadie

An update! Woohoo!

Looking forward to the finished article, Jeff. I'm sure Dylan can't wait.

Well it's been leak tested now for a few hours and all seems ok, so it's time to start putting it all together.

Teelzebub · 13th Nov 2012, 21:38

Quote:

Originally Posted by bulldogjeff

Well it's been leak tested now for a few hours and all seems ok, so it's time to start putting it all together.

Yaaaaa glad to hear it Jeff

Kovoet · 14th Nov 2012, 00:41

Damn nice bud cannot wait to see it finished now

Ripitup121 · 14th Nov 2012, 10:43

Looking at those cards its a pity that BFG tech aren't still in business. They made some wonderful cards. Build is looking good Jeff, Looking forward to the final outcome.

26th Oct 2012, 22:43	#323
bulldogjeff The modding head is firmly back on. Join Date: Mar 2010 Location: Gliding through cyber space Posts: 7,322	I've just been adding up the cost of this build and so far based on donations and stuff I had laying about gathering dust I am running at about £120, and one things for sure it will finish at under £150.. Modding on the cheap.. haha, love it I won't be so lucky on the next one thats for sure lol __________________ BULLDOGS BOX..FINISHED HEAT BLAST...FINISHED Saturday Night Special..FINISHED... Rebirth Finished

26th Oct 2012, 22:59	#324
Teelzebub Satan the one true God / Modarator Join Date: Nov 2009 Location: Culloden / Hell Posts: 10,392	So we going to get some more updates this weekend then? __________________ Before buying from someone on the MP please read the rules and the Problematic sales on the Market Place http://forums.bit-tech.net/group.php?groupid=86 Mountain mods case, Enermax 1250w PSU, Asus Maximus V Extreme, i5 2500k @ 4.5ghz, Samsung 840 250gb SSD. 500gb Seagate HDD Corsair H80i wind tunnel, 16gb Corsair Vengeance 1600, 4xGTX 670 quad SLI

30th Oct 2012, 18:28	#326
bulldogjeff The modding head is firmly back on. Join Date: Mar 2010 Location: Gliding through cyber space Posts: 7,322	The last few bits have just arrived today.. Now I can put it all together ...Wooooohooooo __________________ BULLDOGS BOX..FINISHED HEAT BLAST...FINISHED Saturday Night Special..FINISHED... Rebirth Finished

4th Nov 2012, 15:44	#327
bulldogjeff The modding head is firmly back on. Join Date: Mar 2010 Location: Gliding through cyber space Posts: 7,322	Just about to put it all together and I can't find any fittings Got loads of 1/2 compresions, no 3/8 and 7/16 tubing. All non compatible. I think the route I'll have to go is ti squash the 7/16 tube on to some 1/2 inch barbs. Oh well at lest I'll know that once that tubing goes on it ain't coming off ...lol __________________ BULLDOGS BOX..FINISHED HEAT BLAST...FINISHED Saturday Night Special..FINISHED... Rebirth Finished

7th Nov 2012, 20:14	#329
bulldogjeff The modding head is firmly back on. Join Date: Mar 2010 Location: Gliding through cyber space Posts: 7,322	Got all the barbs now, Just tested one they have some serious grip. Won't let go unless I slice the tubing. Looks like it's time to build a computer __________________ BULLDOGS BOX..FINISHED HEAT BLAST...FINISHED Saturday Night Special..FINISHED... Rebirth Finished

bit-tech.net

Site Links

Our Other Sites

21st Oct 2012, 08:56	#321
PabloFunky Ultramodder Join Date: Sep 2010 Location: UK Posts: 1,164	I was always told, never put things where they dont belong, but this rad placement is an exception i think.

7th Nov 2012, 20:48	#330
KrunchR Supermodder Join Date: Apr 2008 Location: Nottingham,England Posts: 318	Yay! Now hurry up.

12th Nov 2012, 22:13	#332
bulldogjeff The modding head is firmly back on. Join Date: Mar 2010 Location: Gliding through cyber space Posts: 7,322	I've been really busy lately but I have found some time to get started on the inside, mainly routing all the water cooling .. To start with I have a matching pair of these...Although the blocks have different logo's on them, they are identicle, both GPU's are factory over clocked, but I'll be giving them a bit more. So there you have it. A nice bit of progress. I just need to braid a few cables, get it all wired up and leak tested and I'm done. Probably be all finished with in the next few days. Thanks for looking __________________ BULLDOGS BOX..FINISHED HEAT BLAST...FINISHED Saturday Night Special..FINISHED... Rebirth Finished

12th Nov 2012, 22:15	#333
Teelzebub Satan the one true God / Modarator Join Date: Nov 2009 Location: Culloden / Hell Posts: 10,392	Nice one Jeff looking good mate. __________________ Before buying from someone on the MP please read the rules and the Problematic sales on the Market Place http://forums.bit-tech.net/group.php?groupid=86 Mountain mods case, Enermax 1250w PSU, Asus Maximus V Extreme, i5 2500k @ 4.5ghz, Samsung 840 250gb SSD. 500gb Seagate HDD Corsair H80i wind tunnel, 16gb Corsair Vengeance 1600, 4xGTX 670 quad SLI

12th Nov 2012, 22:20	#334
YEHBABY The Millionaires are back! Join Date: May 2010 Location: UK Posts: 1,808	Looking very good Jeff __________________ i7 2700K @ 4.7Ghz // Asus Gene V // 8GB Corsair Vengeance LP // Asus GTX580 DirectCUII // Samsung 830 256GB // 2x2TB Samsung F4EG // Corsair AX850W // Antec P182 // Thermalright Silver Arrow Cooler // Dell U2412M HTPC: 2500K // Asus Gene IV // 4GB Ram // OCZ 120GB // Be-Quiet! CM 580W // Silverstone GD08 // Synology DS209 4TB

13th Nov 2012, 07:51	#336
Spreadie No disassemble! Join Date: Apr 2009 Location: an island in the south Posts: 5,398	An update! Woohoo! Looking forward to the finished article, Jeff. I'm sure Dylan can't wait. __________________ Before you judge a man, walk a mile in his shoes; after that, who cares?! He's a mile away and you've got his shoes! 2500K\|Gene-Z\|8GB\|670\|X-Fi\|3007WFP-HC\|M4\|F3\|MK-85\|G500\|EK Full Ni\|FC670\|D5\|240 UT60

14th Nov 2012, 00:41	#339
Kovoet Do I or Don't I Join Date: Aug 2009 Location: London, Harrow Posts: 4,489	Damn nice bud cannot wait to see it finished now __________________ [Coolermaster Cosmos II] [i7 i2700K] [Hydro H100i] [ASUS 7970 DirectCUii Top] [16GB Corsair Vengeance 1600mhz] [Asus Sabertooth Z77] [Corsair AX850] [1 x 300gb VelociRaptor] [1 x 1TB samsung F3] [Dell U2312H & U2311HM] [Corsair K70] [Belkin (razer) N52te] [QPAD QH90 White] [120GB Corsair pro SSD] [ Mushkin 120GB deluxe SSD Sata 3 ][Corsair M65 white] [ASUS Xonar DX soundcard] Asus Nexus Tablet

14th Nov 2012, 10:43	#340
Ripitup121 MMMMMMm watercooling.... Join Date: Aug 2010 Location: Kerry, Ireland Posts: 240	Looking at those cards its a pity that BFG tech aren't still in business. They made some wonderful cards. Build is looking good Jeff, Looking forward to the final outcome. __________________ Asus ROG Maximus V Formula MoBo, Core i5 3570K @ 4.7Ghz, 6GB Corsair Dominator Ram 1600Mhz, SLi GTX460's(1GB), Enermax Revolution 1250W PSU, Xigmatek Elysium Chassis Dual WaterCooling Loops with 12 Noctua NF-P12's = WOOOOSH!!!

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts