Case Mod Autob0t Sk1ds "worklog"

[AciD_RaiN]

Originally Posted by barry99705

Too often we have build logs with some dudes gnarly feet.

lol nahh I'm not that nasty But I'm really new here so I haven't seen any feet yet xD

[AciD_RaiN]

I got some sleeves from Shak Mods today so I could do some sleeving for my mod.

First I wanted to share a picture I took of the case out in the sun. He wanted some fresh air



Here are the front panel cables sleeved


And the back of the front panel


Sleeved a SATA power extension cable I had


And the front panel back in the case

[AciD_RaiN]

Just a little update. Dona a few changes.


Sleeved the pump cables and even found out that I can to shrink-less fan cable


The Autobot logo on.


Got the power button sticker and it's a perfect fit.


The order from highflow came in the mail so now I can start assembling the watercooling in the case.


Of course I sleeved the cables on the new fans.


The EK Supremacy nickel plexi


The case feet from Mnpctech and the fan grill for the PSU cover.


Had to do a little drilling and dremeling but they are just perfect

[TekLord]

Looks great.

[Slash88]

Looking good my friend

[AciD_RaiN]

Thanks guys. Next update will be tomorrow but then nothing until next month when I have some more cash to spend on it

[AciD_RaiN]

I just got my first official sponsor G-Vans and added their banner to my first post.

This will be my last update for this month but hopefully I can finish it next month...

Just got my Mayhems pastel Mint Green


Here I just finished filling up my loop.


My cable management is not the best but hopefully not the worst either


I just love how the color shows in the CPU block


Decided to use my quick-release fittings so I could remove the pump/res more easily


I'm using a temporary fan controller until My G-Vans fan controller arrives


Still not completely finished with the front...


I think something is missing... What do you guys think??


The side panel on and you can see the beautiful case feet from mnpctech there as well


Please tell me what you think

[mnpctech]

Nice job and Looks like you had a lot of fun building it

[AciD_RaiN]

Originally Posted by mnpctech

Nice job and Looks like you had a lot of fun building it

ohh it was fun and I think I'm improving with every mod I do... The fun is never over though

[AciD_RaiN]

Well finally I was able to finish the inside of my case and this is how it turned out. Only a new fan controller left and then it's officially done

[skullen]

Nice one AR,very tidy job youve done

[AciD_RaiN]

Originally Posted by skullen

Nice one AR,very tidy job youve done

Thanks mate It's my best out of those 3 I've done so far. Hope I will be able to do one over the winter even though there will be bad weather and snow. I have to do all my modding outside...

[mnpctech]

Very nice job dude!

[AciD_RaiN]

Originally Posted by mnpctech

Very nice job dude!

Thanks mate I'm just hoping the charity build I'm doing next will be even better.

[AciD_RaiN]

Well one never stops... I've just been doing a few things here and there and I also finally got the fan controller and even though I gave it a bad review it was a sponsored product for this build.

Some time ago nvidia Brazil posted this on facebook.


Then recently I started making my own cables but I have a really bad camera so they don't really look good on pictures but here they are though


And lastly the fan controller. G-Vans Centurion


I'm gonna change just a few small things in the near future so most likely there will be one more update....

[Parge]

Very nice, clean build - and I have a real penchant for fluorescent green! Awesome work dude.

[AciD_RaiN]

Originally Posted by Parge

Very nice, clean build - and I have a real penchant for fluorescent green! Awesome work dude.

Thanks mate

Here is one very recent with the di-noc in the bottom front and most of the screws are black now... The res is also on a bracket...