|25th Jul 2012, 01:31||#61|
Join Date: Aug 2009
Specs are yelling eeeeeeeee peeeeeeeeeeeeeeeeen in my face, not the first though.
Nice quality build & ridiculous specs, congrats subbed.
stars & rep for a godzilla rig.
|26th Nov 2012, 08:47||#62|
Join Date: Jun 2010
I hope this project hasn't been shelved!! PLEASE UPDATE!!!!
Steam: Gaming_Freak_10. Xbox 360: BlueEyeDragoh.
Black Fox: Processor: AMD AM3 Phenom II X4 965 BE. Motherboard: GA-78LMT-USB3 (rev. 5.0). 4GB DDR3 RAM. 64GB SSD. 640GB HDD. XFX 5770 HD Graphic card. Case: Zalman Z1. PSU: Corsair HX750W
|27th Nov 2012, 03:00||#64|
Join Date: Dec 2011
Location: Manchester, UK
The above posts only just made me realise how long this hasn't been updated in. I was wondering why he was using 580's haha. Anyone know if he finished it or what?
|13th Dec 2012, 09:46||#65|
Join Date: Nov 2009
Wow. SR-2! This is going to be amazing.
i7-2600K | 16GB 1600 | ATI 5870 (Asus) | 2x120GB SSD (RAID 0) | 2x1TB Samsung F1 | Asus Xonar DX | 30" DELL | 2x23" Dell | Cooling: single water cooling loop
|27th Jun 2013, 22:26||#66|
Join Date: Dec 2011
Evening, its been a while.
Got a grown up job, moved house, desk stayed put, now work in a different part of the country to where I moved to... (with the desk nicely placed smack in the middle)
On with the good bit,
put it back together and make some holes for wires...
Also some holes for tubes...
And more wires...
Add some bits n pieces
I needed to raise the SSDs up by about 6 mm so the plugs fir correctly were I'm putting them, so I made these plinths for them that turned out rather well
Hopefully they'll look good once they get anodised too (brushed first)
Got a few of the more wierd and wonderful bolts I needed too...
Then my sleeving arrived...
Decided to sleeve the power cables that go under the cards in the SATA sleeving, which turned out really well.
I had hoped to use the bitfenix extensions I had managed to get hold of... but they looked too different to the sleeving I was using, so I made the executive decision to re-sleeve them...
A few people commented on how long the sleeving took... this may have been why... also if you sit down and work out how may cables are in this desk... you'll realise why this was a soul crushing exercise.
it looks so much better for it
Dual PSU link sorted too.
and after running out of sleeving... got some more and daisy chained all the fans
usb cable here looks a bit grubby, I may have to do something about that...
and then put some better sleeving on the PSU...
Now for the bits you don't really see every day...
The issue of the screen stand I haven't really touched yet, the problem being, I cannot have my screen mounted to the wall as some desk builds do and I refuse to have a dirty great screen covering my motherboard that I've gone to great lengths to have in the middle.
So I got a triple monitor stand... then the upright...
needed to be bigger...
Make a push fit bung with a copy of the thread
and you get a 2.4m monitor stand... (shortest piece of that strength Aluminium I could get )
now for again a more fun bit, another issue, I have a set of 5.1 speakers that I love, so how will these go on? well, make a drop in mount on top of your screen stand, this was really fun to make, probably one of my favourite parts so far.
So now my speaker can perch above my screen without wall mounting, which will keep my land-lord happy.
A new addition to the workshop made this next piece very simple, everyone, Id like you to meet the future of "home" pc builds...
and it does things like this...
then you swap some bolts around
and after a while
Put some more holes in the back of the desk and voila...
A screen stand clamp, with floor plate
That's about it for now, this has been going on for a while but I'll be up at home sleeving the last (hopefully) of the PSU modular cables this weekend.
Then just the finer details to be done before coating the metal... I've hopefully got access to a polishing machine so I can brush the frame before it gets anodised too
Cheers everyone who's still interested, more to come.
|28th Jun 2013, 08:48||#69|
Join Date: Aug 2011
Location: South London
Looking good fella!
I was beginning to think this project got shelved.....
I am looking at at a mill too,got a great price on an Interact series 2.....just need somewhere to put it ....
|28th Jun 2013, 09:30||#70|
All of the hilarious
Join Date: May 2009
Location: in a hole XD
Looking pretty sweet man!
i7 4770K @ 5.0GHz - G1.Sniper M5 - Corsair 2800MHz Dominator Platinum - EVGA GTX780Ti SLI - Samsung 250GB 840 - WD 2TB Black
Logitech G9x - Corsair K65 - Dell 3007WFPHC
M-Audio DX8A Deluxe Stereo Monitors - SBX10 Sub
|28th Jun 2013, 11:04||#71|
Trying to live up to the name
Join Date: Apr 2013
Completely missed this one
annnnddd ...... subbed. definitely subbed!
There should be a new emoticon for stuff like this
Love desk builds. Really wish I had the skill and craftsmanship to make one like this.
All the sleeve looks amazing by the way.
Cant wait to see more of this
PROJECT#001 - ON EXTENDED HIATUS DUE TO NEW BABY!!
|24th Aug 2013, 23:14||#75|
Join Date: Dec 2011
Evening, been a bit busy as usual, working, holidays, moving house again, the usual stuff that gets in the way.
Firstly, my apologies for the quality of the pictures, the DSLR that I've been using is on it's holidays at the minute.
Bored out the screen stand to fit the extension bar from the last update
This meant I could put the new screen on to cut the pole to length once I'd measured up with the speaker
Should be getting the side screens this week and I'll be mounting the left/right speakers to those
So I've been making my way through the little jobs that are finishing touches, ideally I wanted to do these whilst it was getting coated etc, but I was waiting on a few more bits n pieces.
Firstly a bit of a rant I never had at the time. If anyone else has used the EK SR-2 water block, you will be aware of the spacer shipped with the block. The instructions for which are shown below.
As you can see... it shows an EK compression fitting and the 3mm spacer that is in the box...
Here's the thing; if you compare the length of the thread on an EK compression fitting to the thread on an EK barb fitting, you will notice that the thread on the barb is about 1.5 mm longer than a compression. so this happens.
without "unreasonable" force you cannot get this fitting into the block.
HOWEVER... EK do (or did) sell a 1.8 mm spacer which you can buy separately. My point is this, if you're going to tell me I can use your fittings in the instructions, at least draw the instructions with a type of fitting that will actually work.
rant over... handily with the liberal application of a lathe you can work around this, just slap a fitting in and take a couple of mm off. I'm sure not that many people have this issue, but even less of those will have a lathe handy to fix it.
Problem solved and it didn't involve me shipping a spacer from Slovenia
The Bulkhead fittings needed shortening down as they were huge
And then finished off the sleeving
I had a quick test run of the soft felt topping to the frame which the glass will sit on
Finally one of the last pieces, got some grills for the underside of the rads, I was going to strip off the black anodising and redo it red to match the frame. But its just so pretty as is, I might just let it blend in to the black underside.
|2nd Sep 2013, 11:11||#77|
Join Date: Dec 2011
Busy weekend, I was planning on having the desk finished by the 20th, as I'll be moving into my new place, but it doesnt look like ill be able to get the metal work polished this week, so it may take an extra week or two to get the coating and anno sorted.
In theory, the metal work and building.... is done... the last of this was the side speaker stands.
First, turned some bits to mimic the current base for the speakers
Milling a slot in the back of these at the right angle to have the speaker vertical, then drill n tap the mounting holes
Then for the extension bars
Made some conical washers for mounting the bars onto the groove in the screen stand
That's it for this weekend, this lot took a bit longer than expected and I only had one day for desking this weekend.
Next week should be taking it all apart and I've got a plan to make the DVD drive a bit more entertaining too, so ill have a bash at that.
One word.... Soon...
|desk, sr-2, sr-2 desk, the boy riley|