bit-tech.net

Spreadie · 12th Dec 2012, 22:14

Very cool - looking foward to this one!

Subbed.

Gimlehr · 13th Dec 2012, 14:26

Oh the memories! looking forward to seeing the finished product. Subbed!

HCP · 19th Dec 2012, 15:08

Trying the leds in the panels before paint.
Noticed the yellow needs to be changed to amber, too much yellow
BTW, its 3mm led´s

HCP · 6th Jan 2013, 15:13

Made some more panels for the USB headers.

The USB headers goes here, behind the "tower" at the red arrow.

And a colourtest to see how it looks

Soon gettin´ there, much time goes to the LED´s and not so much for the case right now.

TheGreatSatan · 6th Jan 2013, 21:13

Looks clean

loftie · 6th Jan 2013, 21:46

Don't get any ideas of taking over the world, otherwise we're going to have to go tic tac toe on your ass

Big_malc · 6th Jan 2013, 21:50

HCP · 22nd Jan 2013, 00:32

Hammertime!

*Smack*

Got tired of the roof, the plastic i used was to soft that i sagged when sanded and after 10 runs with putty/filler i still didnt have a flat roof.

And all wet sanding made the wood increase in thickness, had it in the oven for a couple of hours now to dry it up.

Going to replace the roof with 4mm acrylic, and i hope i can get done with the casing now, all other parts just laying around and wait

HCP · 13th Feb 2013, 09:28

Current state of the case.
Testing the led-panel, i wish i made the cutout bigger... See if i make that change later or if i just go with it.
Nevermind the edges, its not done yet

Almost time for some Tic Tac Toe

matiss · 13th Feb 2013, 10:45

Hello Joshua

You can never go wrong with some wargames. As a big fan of the movie i have to watch that stunning beauty come to life.

Furball Zen · 13th Feb 2013, 22:32

R.I.P.L.E.Y. died J.O.S.H.U.A. lives

HCP · 14th Feb 2013, 12:19

Quote:

Originally Posted by Furball Zen

R.I.P.L.E.Y. died J.O.S.H.U.A. lives

Hehe, i didnt watch the second movie until i begun with this project. Its crazy that they missed sooo much details on the WOPR, insanely bad WOPR in the movie with Ripley.

HCP · 22nd Feb 2013, 20:02

I have stopped using my white plastic and moved to acrylic, more rigid and not flopping around when sanded. The styrene is to saggy to use in a case this big.

Its gettin´ taller!
I have three fans in the case, on on either side of it, on pulling and the other pushing, one side have double setup (where the rad is).
Both fans are hidden behind a panel and push/pull air trough a duct in front of it. I have made some tests with cardboard just to see the flow and cooling capacity and its plenty good for my purposes. Tested with 100% cpuload in 4hrs and a H60 cooler.
I didnt want any visible fans, im all focused on making it really really look like a smaller version of the real WOPR

The small tabs behind the rounded corner on the acrylic is temporary there when gluing, to get nice straight corners. otherwise they will hit the motherboard

First pic, case rising to the skies.
This is the back side with IO-plate cutout. You also see the fan hole that later is hidden.

Pic two
Here is the cover over the fan on the left side of the case.
Other side have the same type of panel.

Here is how the real WOPR looks like at almost the same angle

Pranja · 22nd Feb 2013, 20:52

This looks awesome.

I like that movie-this is great way to remember it.

Muerlin · 22nd Feb 2013, 21:56

You've been busted for using VLC!

Alekoy · 22nd Feb 2013, 22:46

AWESOME!

Planning on putting a big lens with a red light behind it on my server rack, HAL-style

HCP · 23rd Mar 2013, 22:55

Time to start making the light controllers.
This is just a test for one of nine controllers for the LED panels.
White and blue to the left is output and its triggered on/off by the red with a knot on.

Soldering iron heating up...

12th Dec 2012, 22:14	#21
Spreadie No disassemble! Join Date: Apr 2009 Location: an island in the south Posts: 5,311	Very cool - looking foward to this one! Subbed. __________________ Before you judge a man, walk a mile in his shoes; after that, who cares?! He's a mile away and you've got his shoes! 2500K\|Gene-Z\|8GB\|670\|X-Fi\|V1200+\|3007WFP-HC\|M4\|F3\|MK-85\|G500\|EK Full Ni\|FC670\|D5\|360 GTS\|240 UT60

19th Dec 2012, 15:08	#23
HCP Modder Join Date: May 2012 Location: Sweden Posts: 51	Trying the leds in the panels before paint. Noticed the yellow needs to be changed to amber, too much yellow BTW, its 3mm led´s Last edited by HCP; 19th Dec 2012 at 16:10.

6th Jan 2013, 21:13	#25
TheGreatSatan Dark Lord of BT! Join Date: Aug 2005 Location: ILLINOIS, USA Posts: 1,622	Looks clean __________________ NEW GENESIS ******************************* Modified Azza Genesis with an Intel 2600K, Gigabyte Z68X-UD3H, 32GB (8GB x 4) Corsair XMS3, 480GB Sandisk Extreme, 240GB Sandisk Extreme, 1275 Watt Thermaltake 80 Platinum Modular PSU, EVGA GTX 690 4GB, and a Corsair H60

6th Jan 2013, 21:46	#26
loftie Hypermodder Join Date: Feb 2009 Posts: 763	Don't get any ideas of taking over the world, otherwise we're going to have to go tic tac toe on your ass __________________ Sent from my PC using a keyboard

6th Jan 2013, 21:50	#27
Big_malc Hypermodder Join Date: Sep 2010 Location: essex Posts: 720	__________________ I must not fear, Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain

bit-tech.net

Site Links

Our Other Sites

13th Dec 2012, 14:26	#22
Gimlehr What's a Dremel? Join Date: Dec 2012 Location: UK Posts: 4	Oh the memories! looking forward to seeing the finished product. Subbed!

6th Jan 2013, 15:13	#24
HCP Modder Join Date: May 2012 Location: Sweden Posts: 51	Made some more panels for the USB headers. The USB headers goes here, behind the "tower" at the red arrow. And a colourtest to see how it looks Soon gettin´ there, much time goes to the LED´s and not so much for the case right now.

22nd Jan 2013, 00:32	#28
HCP Modder Join Date: May 2012 Location: Sweden Posts: 51	Hammertime! Smack Got tired of the roof, the plastic i used was to soft that i sagged when sanded and after 10 runs with putty/filler i still didnt have a flat roof. And all wet sanding made the wood increase in thickness, had it in the oven for a couple of hours now to dry it up. Going to replace the roof with 4mm acrylic, and i hope i can get done with the casing now, all other parts just laying around and wait

13th Feb 2013, 09:28	#29
HCP Modder Join Date: May 2012 Location: Sweden Posts: 51	Current state of the case. Testing the led-panel, i wish i made the cutout bigger... See if i make that change later or if i just go with it. Nevermind the edges, its not done yet Almost time for some Tic Tac Toe

13th Feb 2013, 10:45	#30
matiss Multimodder Join Date: Jun 2010 Location: Vienna Posts: 112	Hello Joshua You can never go wrong with some wargames. As a big fan of the movie i have to watch that stunning beauty come to life. __________________ live on air fridays 20-22 @ radio.XES Gothic, Darkwave, Electro, Metal, Rock & Death

13th Feb 2013, 22:32	#31
Furball Zen Shut up and Mod Join Date: Jan 2012 Location: Northern, KY Posts: 526	R.I.P.L.E.Y. died J.O.S.H.U.A. lives __________________ Life. Liberty. The pursuit of those who oppose it. Guides: Modular PSU ~ FC foam removal Mods: Blue on Black ~ DVD-ROM Worklog: Acronymus ~ Carbide @furballzen

22nd Feb 2013, 20:02	#33
HCP Modder Join Date: May 2012 Location: Sweden Posts: 51	I have stopped using my white plastic and moved to acrylic, more rigid and not flopping around when sanded. The styrene is to saggy to use in a case this big. Its gettin´ taller! I have three fans in the case, on on either side of it, on pulling and the other pushing, one side have double setup (where the rad is). Both fans are hidden behind a panel and push/pull air trough a duct in front of it. I have made some tests with cardboard just to see the flow and cooling capacity and its plenty good for my purposes. Tested with 100% cpuload in 4hrs and a H60 cooler. I didnt want any visible fans, im all focused on making it really really look like a smaller version of the real WOPR The small tabs behind the rounded corner on the acrylic is temporary there when gluing, to get nice straight corners. otherwise they will hit the motherboard First pic, case rising to the skies. This is the back side with IO-plate cutout. You also see the fan hole that later is hidden. Pic two Here is the cover over the fan on the left side of the case. Other side have the same type of panel. Here is how the real WOPR looks like at almost the same angle

22nd Feb 2013, 20:52	#34
Pranja Fenrir The Wolf Join Date: Dec 2011 Location: Sisak,Croatia Posts: 950	This looks awesome. I like that movie-this is great way to remember it. __________________ Cosmos S Reaper L.R.E.C. Scorpio Arya-under construction ROG Crawler-under construction

22nd Feb 2013, 21:56	#35
Muerlin What's a Dremel? Join Date: Dec 2009 Posts: 19	You've been busted for using VLC!

22nd Feb 2013, 22:46	#36
Alekoy Ostekake! Join Date: Dec 2003 Location: Ålesund/NORWAY Posts: 948	AWESOME! Planning on putting a big lens with a red light behind it on my server rack, HAL-style __________________ A message to all the girls with nymphomania out there: Hello

23rd Mar 2013, 22:55	#37
HCP Modder Join Date: May 2012 Location: Sweden Posts: 51	Time to start making the light controllers. This is just a test for one of nine controllers for the LED panels. White and blue to the left is output and its triggered on/off by the red with a knot on. Soldering iron heating up...

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts