Case Mod Project: The Apple/19.03.2013/Interior

[Zsolt Guriga]

I cordially greet you, and I want to welcome you to my new project,called The Apple
After the finish of Hello Kitty-project,I was thinking a lot about a new one,and I decided to mod an Apple G4 case, the very fact that the error of ATX motherboards, and other components of course, I found it a challenge
This mod would like to progress in the field of presentation and taken photos, which is quite far away, so to speak, from me
My goal is to create a compact mode (PC), which in appearance and performance meets the present day
HW used will be shown step by step, as currently only the i7 3770k own that will be the heart of this Project
In short I want to prove that not all the old stuff for the landfill and waste
I hope you will enjoy the new project, and that we will share impressions, ideas, and have fun
So lets start
A couple of pictures of the case and its condition :

[Pranja]

Super.

I ja već dugo tražim G5-icu da ju sredim ali nikako da nađem krepanu.

Baš me zanima kako češ srediti ovu četvorku.

[siliconfanatic]

Why do I have a strong feeling that that hex nuts gonna end up as a fill port?

I always have liked the G4 case albeit more than the G5.


I'm gonna get flamed...... I'm gonna get flamed...

[Father-Time]

Very interested to see how this goes, i have one in bits in my shed! They are a well made case alright. Will be good to see what you do with it, good luck!

[Zsolt Guriga]

Originally Posted by Pranja

Super.

I ja već dugo tražim G5-icu da ju sredim ali nikako da nađem krepanu.

Baš me zanima kako češ srediti ovu četvorku.

to nisam ni ja druže našao,ali sve u svemu ovo kućište mi je slađe od G5,jer je manji i kompaktniji
želeo bih da spolja sačuvam osobine fabričke koliko je moguće

[Zsolt Guriga]

Originally Posted by siliconfanatic

Why do I have a strong feeling that that hex nuts gonna end up as a fill port?

I always have liked the G4 case albeit more than the G5.


I'm gonna get flamed...... I'm gonna get flamed...

I agree with you,I like much more this case than the G5 too
So you think that the hex nuts gonna end up with fill port,hmmmgood idea,but lets wait and see

[Zsolt Guriga]

Originally Posted by Father-Time

Very interested to see how this goes, i have one in bits in my shed! They are a well made case alright. Will be good to see what you do with it, good luck!

Thanks,and Iam ipressed too with the quality of the case

[Zsolt Guriga]

Lets back on the work
I started to disassemble the case,with the help of a picture what I founded on the web
Here is the pictures of the progres
First the side that opens

[Zsolt Guriga]

And the other side

[Zsolt Guriga]

And finally the case without cover





please let me say again,that this case is really exelent quality

[Razarach]

Odličan projekt. Svaka čast!

[exexs]

I have the same case in my attic! Wanted to do something with it, but eeh other projects ^^ Wanna follow what you'll do with it

[Zsolt Guriga]

Originally Posted by Razarach

Odličan projekt. Svaka čast!

Hvala druže,pratim te i ja,super su ti ruke za drvo

[Zsolt Guriga]

Originally Posted by exexs

I have the same case in my attic! Wanted to do something with it, but eeh other projects ^^ Wanna follow what you'll do with it

Glad you have the same case,so welcome and follow this project,and the end if you liked it,you can do the same,or even better,with new ideas

[Zsolt Guriga]

The weather was so good in the morning, so I threw on the project
I plotted where and how to cut the bottom of the case,so I can turned it into atx case
and I decided to go a few steps further than pure measurement

[Zsolt Guriga]

Because of the good quality of case,I decided to use heavy artillery instead dremel

[Zsolt Guriga]

Redundant parts



Weather forecast




Roughing with rasp

[nagyizom]

Great start! Looking forward to see what will you do with this case.

[Zsolt Guriga]

Assembling,just to see how fit in
I need here additional processing,and after that im gonna glue it with two component liquid metal or i can use even epoxid






To be continued……..

[Zsolt Guriga]

Originally Posted by nagyizom

Great start! Looking forward to see what will you do with this case.

Thanks my friend,and I cant wait to see yours G5,Ireally like it