bit-tech.net

Go Back   bit-tech.net Forums > Modding > Project Logs
Reload this Page Scratch Build The Wood Brothers
Register FAQ / Rules Calendar Search Today's Posts Mark Forums Read

Reply
Page 2 of 4 < 1 2 34 >
 
Thread Tools View Mode
Old 5th Jan 2013, 03:31   #21
metalglasses
Minimodder
 
Join Date: Apr 2012
Location: Arcata, CA
Posts: 32
metalglasses has yet to learn the way of the Dremelmetalglasses has yet to learn the way of the Dremelmetalglasses has yet to learn the way of the Dremel
Looks good so far, I would like to see what kind of siding you will produce.

Just a tip about the wood, I don't know if you know this, if you do, kind of disregard the tip. When you glue wood side to side, make sure that the bindings are opposed. I noticed on the bottom that the bindings are not opposed, chances are it could be fine, but it could warp a little depending on where you'll be storing the case. I actually broke that rule on my project (deliberately) on the floor board on my desk.
metalglasses is offline   Reply With Quote
Old 6th Jan 2013, 04:17   #22
siliconfanatic
Car lover and Speed Junkie
 
siliconfanatic's Avatar
 
Join Date: Sep 2012
Location: USA rep: 1,452,092 (Greatness)
Posts: 819
siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.
bindings? my wood vocab is rather dimunitive.
__________________
Quote:
Originally Posted by quizz_kid View Post
Blackalize it!

I *am* the guy who loves too many threads to bump them all.
siliconfanatic is offline   Reply With Quote
Old 6th Jan 2013, 11:28   #23
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Quote:
Originally Posted by siliconfanatic View Post
Holy blowhole! Just as i was gonna troll for an update
Another update is here.

Quote:
Originally Posted by metalglasses View Post
Looks good so far, I would like to see what kind of siding you will produce.
Thanks. Side panels will be done tomorrow, but I'm not sure should I use removable panel or just glue it and use it like motherboard tray.
Thanks for the tip.

HDD case in da haus!




I decide to go with space for five drives, and some space for Raspberry Pi.

Also i made radiator standoffs for easy radiator removal.
Razarach is offline   Reply With Quote
Old 6th Jan 2013, 13:42   #24
biojellywobbles
Multimodder
 
biojellywobbles's Avatar
 
Join Date: Feb 2011
Location: East Sussex / Swansea
Posts: 137
biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.
Wow, this is going to be damn impressive
__________________
Main box: FX 6300 @4.2GHz, 8GB Value RAM, Nvidia GTX 470, Corsair Force GT 90GB, Silverstone PS07, Win7
biojellywobbles is online now   Reply With Quote
Old 7th Jan 2013, 15:44   #25
Cheapskate
↓ Don't trust that face!
 
Cheapskate's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 6,979
Cheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for president
Oh, cool. So the pegs will be on the radiator and it will just slide in... cup, things.
Cheapskate is offline   Reply With Quote
Old 8th Jan 2013, 20:37   #26
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Quote:
Originally Posted by biojellywobbles View Post
Wow, this is going to be damn impressive
I hope so, thanks.

Quote:
Originally Posted by Cheapskate View Post
Oh, cool. So the pegs will be on the radiator and it will just slide in... cup, things.
Exactly
Razarach is offline   Reply With Quote
Old 9th Jan 2013, 02:24   #27
siliconfanatic
Car lover and Speed Junkie
 
siliconfanatic's Avatar
 
Join Date: Sep 2012
Location: USA rep: 1,452,092 (Greatness)
Posts: 819
siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.
Quote:
Originally Posted by Cheapskate View Post
Oh, cool. So the pegs will be on the radiator and it will just slide in... cup, things.
nice save. i soooo would've taken that out of context given the chance.
__________________
Quote:
Originally Posted by quizz_kid View Post
Blackalize it!

I *am* the guy who loves too many threads to bump them all.
siliconfanatic is offline   Reply With Quote
Old 9th Jan 2013, 19:40   #28
OcSurfe
Uber Noob
 
Join Date: Aug 2012
Posts: 240
OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.OcSurfe is a hoopy frood who really knows where their towel is.
looks good,
keep it up
OcSurfe is online now   Reply With Quote
Old 9th Jan 2013, 22:04   #29
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Thanks
Razarach is offline   Reply With Quote
Old 18th Jan 2013, 22:04   #30
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Hi guys,new update is here.

I cut the hole for I/O ports.


Also i monted the radiator.


And i got remaining parts for water cooling.



To cool down water pump i got some old CPU heatsink.


And finally sneak peak for tomorrow job.
Razarach is offline   Reply With Quote
Old 19th Jan 2013, 11:47   #31
biojellywobbles
Multimodder
 
biojellywobbles's Avatar
 
Join Date: Feb 2011
Location: East Sussex / Swansea
Posts: 137
biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.biojellywobbles is a hoopy frood who really knows where their towel is.
Are we going to see a custom res per chance
__________________
Main box: FX 6300 @4.2GHz, 8GB Value RAM, Nvidia GTX 470, Corsair Force GT 90GB, Silverstone PS07, Win7
biojellywobbles is online now   Reply With Quote
Old 19th Jan 2013, 20:12   #32
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Quote:
Originally Posted by biojellywobbles View Post
Are we going to see a custom res per chance
Yes

Today I finished reservoir.
After drilling, gluing and stuff I got nice clean res.
Razarach is offline   Reply With Quote
Old 19th Jan 2013, 20:26   #33
dombak1608
Minimodder
 
Join Date: Apr 2012
Location: Slatina, Croatia
Posts: 33
dombak1608 has yet to learn the way of the Dremeldombak1608 has yet to learn the way of the Dremeldombak1608 has yet to learn the way of the Dremeldombak1608 has yet to learn the way of the Dremeldombak1608 has yet to learn the way of the Dremeldombak1608 has yet to learn the way of the Dremeldombak1608 has yet to learn the way of the Dremel
Great work!
I like the res.
dombak1608 is offline   Reply With Quote
Old 19th Jan 2013, 21:21   #34
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Thanks!
Razarach is offline   Reply With Quote
Old 22nd Jan 2013, 18:17   #35
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Little update today.
After some thinking I figure out how to mount the pump.

On down side pump has two unused 4mm holes.


I cut two 2 cm aluminum pieces and drill holes in it.


And this is how it looks when mounted.





One notice, screw is going through down side of the case and holding all that together.
Razarach is offline   Reply With Quote
Old 24th Jan 2013, 17:37   #36
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Last important construction piece is done.
I present to you mobo tray.




Measure twice, cut once.




Mounted.



Lets see how mobo fits.




Few extra pic.




I still need to mount two thermometers and first phase is over.
Razarach is offline   Reply With Quote
Old 24th Jan 2013, 22:22   #37
siliconfanatic
Car lover and Speed Junkie
 
siliconfanatic's Avatar
 
Join Date: Sep 2012
Location: USA rep: 1,452,092 (Greatness)
Posts: 819
siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.siliconfanatic is definitely a rep cheat.
Thats one massive chipset cooler. and one sexy piece of acrylic reservoir
__________________
Quote:
Originally Posted by quizz_kid View Post
Blackalize it!

I *am* the guy who loves too many threads to bump them all.
siliconfanatic is offline   Reply With Quote
Old 19th Feb 2013, 10:31   #38
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
@siliconfanatic; thanks

Long time no see. Time for another update.

Apogee block didn't come with AMD mounting plate so I need to made one. I decide to use plexiglass.






After some testing I found some screws and mount block on motherboard.
Razarach is offline   Reply With Quote
Old 19th Feb 2013, 10:42   #39
dreps
Multimodder
 
Join Date: Oct 2012
Posts: 84
dreps has yet to learn the way of the Dremeldreps has yet to learn the way of the Dremeldreps has yet to learn the way of the Dremeldreps has yet to learn the way of the Dremeldreps has yet to learn the way of the Dremeldreps has yet to learn the way of the Dremeldreps has yet to learn the way of the Dremeldreps has yet to learn the way of the Dremel
looking good so far
dreps is offline   Reply With Quote
Old 19th Feb 2013, 12:57   #40
Razarach
Multimodder
 
Razarach's Avatar
 
Join Date: Jan 2009
Location: Nova Gradiska Croatia
Posts: 189
Razarach has yet to learn the way of the DremelRazarach has yet to learn the way of the DremelRazarach has yet to learn the way of the Dremel
Thanks!
Razarach is offline   Reply With Quote
Reply
Page 2 of 4 < 1 2 34 >

« Previous Thread | Next Thread »
Thread Tools
View Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 19:14.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.

bit-tech.net - Top