bit-tech.net

Go Back   bit-tech.net Forums > Modding > Project Logs
Reload this Page Scratch Build Project: FrozenCPU: Billet Pron Bench; Updated Today!
Register FAQ / Rules Calendar Search Today's Posts Mark Forums Read

Reply
Page 8 of 14 « First < 34567 8 910111213 > Last »
 
Thread Tools View Mode
Old 25th Feb 2013, 17:05   #141
Mosquito
Hypermodder
 
Mosquito's Avatar
 
Join Date: Mar 2011
Location: Minnesota, USA
Posts: 626
Mosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run Crysis
The thing I like about that kind of work is that you can at least see tangible progress. But it is a lot of the same lol

What you need is an intern to do that for you
__________________
Mosquito
Scratch Builds: Just A-PC | Mini HTPC | Music Box | Ham Theater PC
Case Mod: Definition: Server | IBM PC AT Reborn
Mosquito is offline   Reply With Quote
Old 26th Feb 2013, 15:09   #142
mnpctech
bit-tech sponsor
 
mnpctech's Avatar
 
Join Date: Apr 2003
Location: Mpls, MN
Posts: 3,426
mnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for president
@Mos, are you hinting at something?

@Waynio, I understand and just wish I had more time to savor the moment

I received the shell for Actuator's LAC control pcb box from firgelli, it's perfect for our Tech Station, it's aluminum with Black plastic end caps, 57mm x 57mm x 26mm, $12 each from their store
mnpctech is offline   Reply With Quote
Old 26th Feb 2013, 15:32   #143
Mosquito
Hypermodder
 
Mosquito's Avatar
 
Join Date: Mar 2011
Location: Minnesota, USA
Posts: 626
Mosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run Crysis
I think I'll stick with my software dev, I'm probably better at that than modding

Looks like the controller box should fit in nicely.
__________________
Mosquito
Scratch Builds: Just A-PC | Mini HTPC | Music Box | Ham Theater PC
Case Mod: Definition: Server | IBM PC AT Reborn
Mosquito is offline   Reply With Quote
Old 26th Feb 2013, 15:53   #144
bulldogjeff
The modding head is firmly back on.
 
bulldogjeff's Avatar
 
Join Date: Mar 2010
Location: Gliding through cyber space
Posts: 7,322
bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.
This just gets better and better, I love all the parts and the overall look. I wouldn't fancy carrying it around though..

Top modding Bill. I can't wait to see it all come together.
bulldogjeff is offline   Reply With Quote
Old 26th Feb 2013, 16:24   #145
IanW
Grumpy Old Git
 
IanW's Avatar
 
Join Date: Aug 2003
Location: N.Wales
Posts: 2,971
IanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpitIanW is almost as Godly as yodasarmpit
Once this is finished, I think you'll need to build one of these for the workshop.
__________________
i5 2500K@3.3GHz / Corsair H50-1 / Asus P8P67-M PRO / 16GB Corsair Vengeance / MSI GTX670 / 240GB Samsung 840 /
1TB HDD / Silverstone 600W / Silverstone SG-09 / Dell U2713HM / CM Storm Quickfire TK / Logitech G9 / Win7-64 Ultimate / Ubuntu 13.04-64
IanW is offline   Reply With Quote
Old 27th Feb 2013, 15:56   #146
mnpctech
bit-tech sponsor
 
mnpctech's Avatar
 
Join Date: Apr 2003
Location: Mpls, MN
Posts: 3,426
mnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for president
@Mos, I've told landlord that I'm looking for bigger shop space...

@jeff, thank you! it's not that heavy tho, but haven't finished top yet

@I&W, def need bigger shop if i get that

I've been editing videos mostly this week, I took a mental break yesterday to install our machined alum case feet onto the Tech Station.



Frozen retails Mnpctech's Aluminum "Grooved" Case Feet here,
http://www.frozencpu...d_-_Silver.html
mnpctech is offline   Reply With Quote
Old 27th Feb 2013, 16:01   #147
Asouter
Tremendously Difficult Lifestyle
 
Asouter's Avatar
 
Join Date: Jan 2012
Location: Southampton UK
Posts: 599
Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.Asouter is the Cheesecake. Relix smiles down upon them.
That's just blatant marketing They suit the build really well though. Looking really good and looking forward to seeing it assembled
__________________
Finished Project : D33P THOUGHT
Finished Project : THING
Current Project : Mini Moto Mayhem
Asouter is offline   Reply With Quote
Old 27th Feb 2013, 16:43   #148
p0Pe
gief cake?
 
p0Pe's Avatar
 
Join Date: Nov 2007
Location: denmark!
Posts: 1,207
p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!p0Pe - it's over 9000!!!!!!!!1!1!1!!!
It bugs the hell out of me that they go out over the chamfer on the bottom
__________________
p0Pe is offline   Reply With Quote
Old 27th Feb 2013, 17:59   #149
Cheapskate
↓ Don't trust that face!
 
Cheapskate's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 6,979
Cheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for president
Me too.
In my defense; they had to be moved out that far for the optical, and I thought the bevel on the feet would line up. It does, sort of.
Cheapskate is offline   Reply With Quote
Old 27th Feb 2013, 18:58   #150
Azariel
Multimodder
 
Azariel's Avatar
 
Join Date: Oct 2008
Location: Netherlands
Posts: 83
Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!Azariel - it's over 9000!!!!!!!!1!1!1!!!
Maybe bevel the top edge of the feet to match the beveled edge of the case...

Anyway, they indeed look made for this case Stunning!
Azariel is offline   Reply With Quote
Old 27th Feb 2013, 19:15   #151
avolla
Hackintosher
 
avolla's Avatar
 
Join Date: May 2010
Location: ND, USA
Posts: 120
avolla has yet to learn the way of the Dremel
It wouldn't take much to take a little off the top of the feet to have it meet up with the chamfer you have on the case. Just an idea. Looks great.
avolla is offline   Reply With Quote
Old 27th Feb 2013, 23:58   #152
Joshcowin
What's a Dremel?
 
Join Date: Jan 2013
Posts: 3
Joshcowin has yet to learn the way of the Dremel
wow just wow only just found this.subbed
Joshcowin is offline   Reply With Quote
Old 28th Feb 2013, 10:12   #153
Mankz
dat steak
 
Mankz's Avatar
 
Join Date: Jan 2006
Location: SW1H
Posts: 13,519
Mankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on youMankz - may the hammer of Bindi be bestowed on you
Quote:
Originally Posted by p0Pe View Post
It bugs the hell out of me that they go out over the chamfer on the bottom
I thought that was just my OCD kicking in
Mankz is offline   Reply With Quote
Old 1st Mar 2013, 12:44   #154
mnpctech
bit-tech sponsor
 
mnpctech's Avatar
 
Join Date: Apr 2003
Location: Mpls, MN
Posts: 3,426
mnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for president
I noticed that too, on the que for our new OKUMA CNC Lathe!

Got the final two pieces finished last night, so today I'm going in early to start assembly of the cover, Yay! Yesterday I took these photos of the motherboard tray.

Any interest in Mnpctech offering ATX version motherboard tray & I/O for Scratch Builders?





Last edited by mnpctech; 1st Mar 2013 at 12:53.
mnpctech is offline   Reply With Quote
Old 1st Mar 2013, 14:25   #155
Mosquito
Hypermodder
 
Mosquito's Avatar
 
Join Date: Mar 2011
Location: Minnesota, USA
Posts: 626
Mosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run Crysis
That looks sweet. Now just need to get the power cables run to the back of the board instead

Depending on the price, I may be interested, but it would have to be "down the road"... I've been using the Lian-Li replacement motherboard/IO plates for my scratch builds.
__________________
Mosquito
Scratch Builds: Just A-PC | Mini HTPC | Music Box | Ham Theater PC
Case Mod: Definition: Server | IBM PC AT Reborn
Mosquito is offline   Reply With Quote
Old 1st Mar 2013, 16:26   #156
Cheapskate
↓ Don't trust that face!
 
Cheapskate's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 6,979
Cheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for presidentCheapskate should be considered for president
@Mosquito - With a 3/4" gap under the motherboard, I figure even hoses could sneak under into those 4 holes. -Should make cable management a breeze.
Cheapskate is offline   Reply With Quote
Old 1st Mar 2013, 18:31   #157
mnpctech
bit-tech sponsor
 
mnpctech's Avatar
 
Join Date: Apr 2003
Location: Mpls, MN
Posts: 3,426
mnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for presidentmnpctech should be considered for president
Yep, these risers make it muuuch easier.... You know where to find me, Mos
mnpctech is offline   Reply With Quote
Old 1st Mar 2013, 18:52   #158
Unicorn
Uniform November India
 
Unicorn's Avatar
 
Join Date: Jul 2006
Location: Northern Ireland
Posts: 9,832
Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.Unicorn is the Cheesecake. Relix smiles down upon them.
1) I love this. Who wouldn't?! Epic work as always Bill, keep up the awesome work! Subscribed

Quote:
Originally Posted by mnpctech View Post
Any interest in Mnpctech offering ATX version motherboard tray & I/O for Scratch Builders
2) Yes
Unicorn is offline   Reply With Quote
Old 1st Mar 2013, 19:31   #159
Mosquito
Hypermodder
 
Mosquito's Avatar
 
Join Date: Mar 2011
Location: Minnesota, USA
Posts: 626
Mosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run CrysisMosquito can run Crysis
Quote:
Originally Posted by Cheapskate View Post
@Mosquito - With a 3/4" gap under the motherboard, I figure even hoses could sneak under into those 4 holes. -Should make cable management a breeze.
I meant attach the cables themselves to the back of the motherboard, similar to what riekmaharg2 did with the panel cables in Blue Horizon
http://forums.bit-tech.net/showpost....&postcount=319

Quote:
Originally Posted by mnpctech View Post
You know where to find me, Mos
You're a bad influence! (good?)... My checkbook hates you
__________________
Mosquito
Scratch Builds: Just A-PC | Mini HTPC | Music Box | Ham Theater PC
Case Mod: Definition: Server | IBM PC AT Reborn
Last edited by Mosquito; 1st Mar 2013 at 19:37.
Mosquito is offline   Reply With Quote
Old 2nd Mar 2013, 01:26   #160
avolla
Hackintosher
 
avolla's Avatar
 
Join Date: May 2010
Location: ND, USA
Posts: 120
avolla has yet to learn the way of the Dremel
Just think of it as stimulating the economy one mod at a time.
avolla is offline   Reply With Quote
Reply
Page 8 of 14 « First < 34567 8 910111213 > Last »

Tags
evga titan sli, evga x79, tech bench, tech station, test station

« Previous Thread | Next Thread »
Thread Tools
View Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 09:45.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.

bit-tech.net - Top