MYO PSU - bit-tech.net Forums

WilHarris · 12th May 2005, 11:28

http://www.bit-tech.net/news/2005/05/12/mod_your_psu/

GigantoR · 12th May 2005, 13:35

Looks like a great setup for a test psu, for testing LED arrangements, fans, lighting, all that jazz.

KryoNexus · 12th May 2005, 16:02

a little paint would go a long way for this project.

Murdoc · 12th May 2005, 16:19

I did this about 3-4 years ago, mounted the PSU on a plank and used copper pipe as posts, the copper pipe was use as a large diameter terminal was required.

I think somone else on the forum has done similar too.

'doc

Da Dego · 12th May 2005, 16:35

gGnome redid his whole power supply for Orac, I think...made it all into jack plugs, which I thought looked great.

Almightyrastus · 12th May 2005, 19:09

I have used an old AT PSU as a bench supply for ages for little bits of testing here and there but I wouldn't mind making up a decent one maybe with monitoring needle displays and further variation on the output voltages, as much for something to make as the use I would get out of it.

12th May 2005, 11:28	#1
WilHarris Just another nobody Join Date: Jun 2001 Location: Oxford Posts: 2,671	MYO PSU http://www.bit-tech.net/news/2005/05/12/mod_your_psu/

12th May 2005, 13:35	#2
GigantoR Supermodder Join Date: Jul 2004 Location: Texas Posts: 417	Looks like a great setup for a test psu, for testing LED arrangements, fans, lighting, all that jazz. __________________ Sexy Black - a Lian Li case mod

12th May 2005, 16:35	#5
Da Dego Brett Thomas Join Date: Aug 2004 Location: Cleveland, OH USA Posts: 3,906	gGnome redid his whole power supply for Orac, I think...made it all into jack plugs, which I thought looked great. __________________ "Frankly that seems overkill. iluvtrees2 arguing with spec is the intellectual equivalent of a bunny rabbit taking on a pissed-off lion." - Nexxo

12th May 2005, 19:09	#6
Almightyrastus Heathen Join Date: Mar 2002 Location: Nottingham, England Posts: 442	I have used an old AT PSU as a bench supply for ages for little bits of testing here and there but I wouldn't mind making up a decent one maybe with monitoring needle displays and further variation on the output voltages, as much for something to make as the use I would get out of it. __________________ Lo there do I see my Father. Lo there do I see my Mother, and my Sisters and my Brothers. Lo there do I see the line of my people, back to the beginning. Lo they do call to me. They bid me take my place among them, in the halls of Valhalla where the brave may live forever.

12th May 2005, 16:02	#3
KryoNexus Multimodder Join Date: Jan 2004 Location: in a box Posts: 122	a little paint would go a long way for this project.

12th May 2005, 16:19	#4
Murdoc Gas Mask..ZOMG Join Date: Jul 2003 Location: Dudley, West Midlands Posts: 2,473	I did this about 3-4 years ago, mounted the PSU on a plank and used copper pipe as posts, the copper pipe was use as a large diameter terminal was required. I think somone else on the forum has done similar too. 'doc