Case Mod - In Progress Mods By Donnii - ThermalTake P5 Frosted tubes

So here is a new build log from me, i will start this project with some sponsors who helps me to make this possible so lets start by listing them here!



All watercooling parts are from Aquatuning, Great guys A big thanks for the support!!!:

• Alphacool NexXxoS XP³ Light - Brass Black Chrome
• Alphacool NexXxoS Monsta 480mm
• Alphacool Eisbecher D5 250mm Acetal
• Alphacool VPP655 - G1/4 inner thread including Eisdecke D5 - Acetal V.3
• Alphacool HT 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - deep black
• Alphacool HardTube 16/12mm plexi clear 80cm - 4pcs
• Alphacool connection terminal TEE T-piece round, G1/4 - deep black
• Alphacool L-connector 90° - G1/4 revolvable - 2x inner thread - Deep Black
• Alphacool angled adaptor 45° - revolvable - G1/4 outer thread to G1/4 inner thread - Deep Black
• Alphacool angled adaptor 45° - G1/4 revolvable - 2x inner thread - Deep Black
• Alphacool Eiszapfen 2-way ball valve G1/4 - Deep Black
• Alphacool Y-45° connector - G1/4 revolvable - 2x inner- 1x outer thread - Deep Black
• Alphacool double nipple G1/4 outer thread to G1/4'' outer thread with O-ring - deep black

MSI Sponsored there MSI X99A Mpower for a high quality Motherboard to go with the Intel i75960x

Next Sponsor is Noctua for them cool Industrial PPC NF-F12 PWM fans:

• 8 x Noctua Industrial PPC NF-F12PWM 2000RPM IP67 With white corners for all

Next one up is Be Quiet!

• Be Quiet! Dark power Pro 11 - 1200W

OCZ With SSD's

This is the Sponsors so far.

_______________________________________________________________________________________________

The Build is going to be in a ThermalTake P5 case with some modifications to it.

Hardware will be folowing

MSI X99s SLI Pro
intel I7 5960x
64GB of Kingston DDR4 2800Mhz RAM
OCZ Revodrive 350 480GB
Kingston Predator M.2 SSD 240GB
MSI GTX960 4GB ( Later on my GTX980 TI will go ind it )
Broadcom 2 x 10GBps NIC's

_______________________________________________________________________________________________

So lets start by looking at the things i got so far

First package @ 3-Feb- 2016





















Next up is some pictures off some off the parts

















































Over and out for now guys have a good one

 

Impressive set of parts you got there, looking forward to the build.

 

Thanks i really look forward to see it done! I have some new pictures today

 

Update 5/2/2016

Today i got the ThermalTake P5 case, really cool case!! so here is some pictures of the build so fare

 

New update 08-02-2016

New package from Aquatuning just arrived

This time its a PWM splitter, LCD display, bending tools.









/Donnii

 

Update 10/2/2016

So now im working on some panels to make it all clean and nice

I still nees some things to come home, but the most parts are here now, so now i need to get startet on CNC these panel

 

Update 11/2/2016

Yet a new update! Today i got some CNC work done and got the Leather on the panels, looks pretty cool i think

Here's some pictures


























/Donnii

 

Great job bro

 

Wuhuuuu New CPU

Today i got my i7 5960X for this system





/Donnii

 

Update 12/2/2016

The i7 5960x is up and running in a test loop to make sure its all like it should be A lillte ghetto, but it work for now



/Donnii

 

Like the backplate! It sure is an interesting case, just think the standoffs are a bit too long, no?

How's that Kress 900 you're using? I'm thinking about building a small 50x50 cnc with it. Is it very laud with no load?

 

I love my P5, TT hate be damned. The one thing I can't figure out though is why people always mount the 480 rad with the ports on top. I much prefer mine on bottom for draining purposes.

 

At full speed it makes some noise but i dont think its to bad

 

This Rad does have a hole in the bottom to

The reason why i mounted it that way, is not to get ait trapped in there

 

DOH! Oh yeah, now I see the drain valve. I somehow missed that!

 

Hehe yup

 

Update 18/2/2016

So today i got the last package with Water parts, Now i can get more doen on the build



/Donnii

 

Access for pump speed

By default ThermalTake havent made a hole for ajusting pump speed, i need it so i made a access hole myself



/Donnii

 

New update 19-02-2016

So today i played around with the tube bending and its going to look something like this, im not sure if im happy with this yet, so ill try out some other runs to i think!

More to come





































































/Donnii