My Toshiby Satellite A200 needs a new case. Yesterday I've started glueing display matrix cover. Here you can see back side. It will be also laptop cover. You can see the brass inlay. There is a front frame. Today I've started to make some decorating elements. I've milled small groove to place them. A little sanding. A little milling and I can drill holes to join the two parts of the matrix case. End of day 2.
Yesterday I had no time to complete the worklog. I will probably put the keyboard in this way. A small fitting to lcd. And finished lcd cover End of day 4
Yesterday I've started to do some fittings of the motherboard. At the moment I've made a cpu fan grill: First panel with connectors: audio and SD card slot. And the last think for today is a Wi-Fi switch. End of day 6
Thanks guys Today I've took care of the next part of the case. The second CPU fan grill and a second set of sockets. End of day 7
All elements on the first fitting. Here I have a plexiglass "embedded" in the wood. Underneath are LEDs. And the views from the sides. End of day 7.
fantastic steampunk! really like the design tho i think you use more then needed thickness in the material
Hi and thanks Waynio I would like to make more of my projects. But it's a little hard to make them without sponsorship
They are just a few little things to do and the laptop cover will be finished. And here you can see the speaker covers. End of day 10.
Great job!! I was thinking some time ago on doing something similar to that, but that level of attention to detail never went through my head!