Hi! guys! I start work at another mod starting from the Case Bitfenix Shogun I want to change the design and colors of this fantastic case POWER SUPPLY: FSP HYDRO G 750W Motherboard: MSI Z97A GAMING 6 Graphics Card:MSI GTX 980 GAMING 4G Case: BitFenix Shogun Ram: 16 Gb CORSAIR VENGEANCE(4x4Gb) Fans: 6 x Bitfenix Xtreme Spectre Pro LED blue LED: Alchemy 2.0 Magnetics Led Strips RGB controller 150 cm CPU: Intel i7 4790k SSD: Samsung PRO 128 GB HDD: 4 TB WD Green (2 x 2Tb) Now some hardware photos The power Supply is FSP HYDRO G 750W
The lighting of the case will be entrusted to the BitFenix Magnetic RGB LED controller may change due to their effects and lights. Although the c BitaseFenix Shogun already has a controller for the LEDs. And then some of sleeving with BitFenix Alchemy 2.0 sleeved Cable
I usually start with a mod when I start with a well-defined project and then add details and changes during construction. As in this case that with a simple modification to the case, I repositioned the power buttons, reset and USB ports from the front to the rear. Here is an overview of the case: These are the supports for the GPU Take down some of parts
Now i customize the power supply: un FSP Hydro G 750 I painted some details with the airbrush with acrylic paint water-based
After the power supply starts to place the radiator 360mm, with 3 fans Spectre Xtreme LED BLU that will be linked to the BitFenix Recon for the speed and temperature management) And with a bit of plexiglass cuts begin to customize the exterior of the case
For the liquid cooling system i use PUMP AND RESERVOIR: EK XRES 100 D5 vario WATERBLOCK: Alphacool NexXxoS XP³ Light - Acetal Edition RADIATOR: Alphacool NexXxoS ST30 Full Copper 360mm