Scratch Build – In Progress Lament Configuration // Finished.

hello friends // hola amigos,

This project is inspired by the hellraiser cube called "Lament Configuration".//este proyecto esta inspirado en el cubo de hellraiser llamado "lament configuration".

This is a work that is started of zero, and the main materials are aluminum and acrylic.//Es un trabajo comenzando de cero, y los materiales principales serán, aluminio y acrílico.



angle of aluminum: 8/4 x 1/8
acrylic: white 3mm x 32cm and black 2mm x 32 cm



L + screw


start drawing // inicio del dibujo


beginning of the draft // inicio del calado



filing // limado

and video:



test manual jigsaw


the real duration of the video is 36 minutes

more pics:

 

Usb 2.0 that will be use for this mod // usb 2.0 que serán utilizados para este mod:

It is giving form to the cube // dando forma al cubo:


It is joining the acrilic plaque to the metallic structure // Uniendo la placa de acrilico a la estructura metalica:








At finally the base for the hd // por ultimo la base para el hd:

Later of search much,( in Colombia is difficult find coolermaster), i could find a coolermaster´s ventilator:
luego de buscar tanto,(en Colombia es dificil conseguir coolermaster), logre conseguir un ventilador coolermaster



me dispuse a hacer el motherboard tray de una lata de un case viejo
i resolved to make the motherboard tray of a tin of a old case



doblar
bend



lijar
sand



Remachar
rivet






yes, i know, it doesn´t totally sanding, the sandpaper is finished, but i decided change the motherboard tray cause it didn´t like me, i have another idea.
later, i will finish of assemble the cube´s structure
cute the the platens at angles of 45 degrees
Si lo se no esta totalmente lijado, se me acabo la lija , pero decidi cambiar el motherboard tray no me gusto, ya tengo otra idea.
luego terminar de armar la estructura del cubo.
cortar las platinas en angulo de 45 grados




y claro esta unirlas al cubo:
and of course join it to the cube




y agregar soportes adicionales:
and add aditional supports



+ acrylic





luego a dibujar:
later to draw




http://www.youtube.com/watch?v=oKaY_ItALqQ


Muchas gracias a los que siguen mi humilde trabajo.
thank you very much to people that follow my humble work.

 

great start.

Reminds me of Pandoras box somehow.

 

*well friends, the advances of yesterday were:
Adaptation of the slide to set the pci,

4 discs while,


then mount the images and sanding and that


Diseño del motherboard tray para pintado posterior.

*design of the motherboard tray then paint it.



Cortando angulo para unir el motherboard tray con los rieles,Perforaciones para los remaches,fijación del riel,Mothertray montado,con hardware de prueba (board no prende y tarjeta de video con artifacts).

*
Cutting angle to attach the motherboard tray to the rails,



holes for rivets,


fixing the rail,

Assembled Mothertray,




With test hardware (board does not turn video card with artifacts)




fije los angulos para la fuente (lata de fuente generica, sera removida),

angles set to the source (source can of generic, will be removed)



pintura a la base de la board,
*paint the board´s base.



2 capas de pintura + lijado,
*2 layers of paint +sanding

corte del logo de Cooler Master,
*cut the cooler Master´s logo


Corte de las letras,
*cut of the letters.








So let make the outer cube frame, dimensions 53cm height x 53cm width x 43cm length.

Cutting:



Join the pieces together:



mmmm Thank you my friend but I don't have any Welding, so I have to go this way:






Outer Cube Frame (Completed)



Setting up the fan for the Power supply:




Adaptation for wiring the power supply:









This fan goes in the same as the power supply but in the bottom section, it will work as intake.



Now is time for the Cooler Master's fan



Mounted:



in the case and working:





fron the other side:




Cut:

bending and perforated:

and then rivet:

Test,


before:

after:


I bought some brackets and steel rope to hold the cube in place:



Then I cut a piece of black acrylic and installed the invisible swith, you will be able to see it when it’s on:


Sleeving the Cathodes:


Opening system for the door, the hinges are from chain parts:

Installing the Power Supply:

Details on the Rear Panel:

Installing Hardware:


Small Gallery, tomorrow more updates:














Cuando tomaba fotos, timbraron en mi hogar y era mi disipador Hyper N620 presentado por la modelo


Stock vs Hyper

Instalado: