1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scratch Build – In Progress My scratch build. 6/19 Started to paint.

Discussion in 'Project Logs' started by Halchart, 23 May 2012.

  1. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    I posted a while ago about starting my scratch build and now I finally have some free time to start it.
    [​IMG]
    here's the sketch-up design.

    [​IMG]
    This is HTS-2000 an aluminum brazing rod. This is what I'm going to use to put the frame together.

    [​IMG]
    Makes a good strong joint.

    [​IMG]
    This is the frame with the motherboard tray in place.

    [​IMG]
    With the top and side panels in place.

    I used 1/8" aluminum plate for panels and a few different sized angle aluminum for the frame. I'm just waiting for the screws i ordered to come arrive and i still have to place an order with mnpctech.com
     
    Last edited: 19 Jun 2012
  2. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    Sorry about the late update I started right before I took the wife and kids out on vacation. But I have gotten a little more done.
    [​IMG]
    got my socket caps and all my panels cut and mounted.
    [​IMG]
    and cut the hole for the optical drive.
    I get paid tomorrow so I will be ordering fan grills and a few other things. Thanks for looking.
     
  3. Gluthtew

    Gluthtew What's a Dremel?

    Joined:
    21 May 2012
    Posts:
    1
    Likes Received:
    0
    I think, that you are mistaken. I can defend the position. Write to me in PM, we will talk.
     
  4. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    I don't know what I am mistaken about. But I cant send any PM's yet.

    I also have a little update I just finished a circuit for lighting my case. It will alternate between two different strings of LEDs they fade in and out. Once i get a moment to get a vid I will post it. I also ordered my fans and a couple of MNPCTechs Nautilus Fan Grills.
     
  5. bluc

    bluc What's a Dremel?

    Joined:
    4 Apr 2012
    Posts:
    284
    Likes Received:
    3
    Looks good off to a great start!!:rock::dremel: what size are those Allen caps looking at using them on my mod in m3 size.
     
  6. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    On the front, back and top I used 6/32 and the sides i used a 4/40 flat socket cap.
    http://www.fastener-express.com/ is where I got them from.
     
    Last edited: 3 Jun 2012
  7. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    Got home from work today and had a couple packages waiting for me.
    [​IMG]
    Xigmatech fans.
    [​IMG]
    A couple MNPCTech Nautilus fan grills. These thing look way better in person. :D

    So a little cutting and.
    [​IMG]
    I love the way these grills look. Also I had done the back a few days ago.
    [​IMG]
    The PSU in there is an old one just making sure it fits. But I think I'm gonna need a grill of some sort for the rear fan.
     
  8. bluc

    bluc What's a Dremel?

    Joined:
    4 Apr 2012
    Posts:
    284
    Likes Received:
    3
    Looks good I think the grills are a good choice:thumb:
     
  9. mnpctech

    mnpctech bit-tech sponsor

    Joined:
    21 Apr 2003
    Posts:
    4,282
    Likes Received:
    318
    Cool project and another Minnesotan! welcome to bit-tech Halchart! :rock:

    lookin forward to seeing your build when it's finished :thumb:
     
  10. Mosquito

    Mosquito Just 'Plane' Crazy

    Joined:
    24 Mar 2011
    Posts:
    979
    Likes Received:
    71
    This :thumb: ;)


    Looks good so far! Keep it up :dremel:
     
  11. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    @bluc thanks for the comments.

    @mnpctech thanks but I realized when I placed my order I forgot to add some modders mesh so expect another order soon :wallbash:

    @Mosquito thanks it's cool to see more Minnesotans in here.

    Right now It's on hold till the heat comes down a bit. It's way to hot in my garage right now to work but the temps are supposed to drop next week.
     
  12. Mosquito

    Mosquito Just 'Plane' Crazy

    Joined:
    24 Mar 2011
    Posts:
    979
    Likes Received:
    71
    Should have been working on it in February, when the temperatures were in the 70s :p... crappy winter....
     
  13. mnpctech

    mnpctech bit-tech sponsor

    Joined:
    21 Apr 2003
    Posts:
    4,282
    Likes Received:
    318

    PM me before ordering! :thumb:
     
  14. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    lol... Yeah it was a pretty weak winter. Too bad I didn't have the funds then.

    Little update.

    This is the fading circuit I'm using for some accent lighting in my case. I'll probably change to an alternating white and blue LEDs. Right now I plan to place some under the mobo tray and the mobo itself.
     
  15. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    Started painting a little.
    [​IMG]
    MNPCTech grooved case feet. (taken from an old mod and painted)
    [​IMG]
    And the Overkill grills. Both were painted with Dupli-color metalcast paint so they look alot like they've been anodized. I got a new PSU on order and already got my sleeve waiting for it to arrive.
     
  16. bluc

    bluc What's a Dremel?

    Joined:
    4 Apr 2012
    Posts:
    284
    Likes Received:
    3
    I like the paint and your right it looks like its anodized!:thumb:
     
  17. mnpctech

    mnpctech bit-tech sponsor

    Joined:
    21 Apr 2003
    Posts:
    4,282
    Likes Received:
    318
  18. bluc

    bluc What's a Dremel?

    Joined:
    4 Apr 2012
    Posts:
    284
    Likes Received:
    3
    How your mod going managed to make any progress?
     
  19. Halchart

    Halchart What's a Dremel?

    Joined:
    26 Jul 2011
    Posts:
    21
    Likes Received:
    0
    @ mnpctech Thanks for the heads up. I'll have to buy some this weekend.

    @bluc going good working on sleeving a power supply right now. I get paid this week so I will be buying paint. Hopefully will have some new pics this weekend.
     
  20. Mosquito

    Mosquito Just 'Plane' Crazy

    Joined:
    24 Mar 2011
    Posts:
    979
    Likes Received:
    71
    Agreed with Bill, the plastikote is good stuff. I use it on cast iron (hand plane restorations) and it works great.

    This paint is looking good, keep up the good work :)
     

Share This Page