Scratch Build – In Progress Project: Ec-SYNCDESK Evo - The Three Versions - Finish

Hello everyone, I would like to start this new project, I have seen on the net and in this forum that there are already many (all fantastic and crazy) but I'd like to have something that occurrence can be closed to make space for another place and maybe even in the wall of the living room where the TV is.
Let's start with these pictures, they are not very good at drawing, this is only a draft, during the phase of the project `'ll decide how to proceed.
The fixed points are: folding desk fixed to the wall with support for keyboard and mouse attachment.

A big thank to all my sponsors who are helping me with this project














Specs:

Cpu: Intel i7-4790
Motherbord: Asus Maximus VII Impact
Vga: ASUS GeForce GTX 750 Ti OC
Ram: Kingston HyperX Fury memory 8gb
SSD: HyperX 3K SSD 120gb
SSD: Samsung 840 Evo 1Tb
Psu: Enermax Revolution XT 730W Gold 80 plus
Keyboard: Corsair K70 Red
Mouse Rapoo
Monitor: Samsung F6400 FHD 3D 40"

Watercooling:
EK-HDC Fitting 12mm G1/4 - Black Nickel
EK-HD Adapter 10/12mm - Nickel
EK-AF Angled 45° G1/4 Nickel
EK-AF Angled 90° G1/4 Nickel
EK-Supremacy EVO Copper Plexi
EK-D5 Vario (12V DC Pump)
TUBE PrimoChill PrimoFlex™ Advanced LRT™ 12,7 / 9,5mm - Crystal Clear RETAIL 3m
EK-HD Tube 10/12mm 500mm (2 pcs)
EK-Ekoolant UV Lime GREEN (premix 1000mL)
EK-RES X3 250
EK-XTOP D5 PWM Plexi
EK-D5 Cover Kit (Nikel)
Cooler Master Nepton 280L Radiatore
Cooler Master JetFlow 140mm 2
Enermax T.B Apollish Blue 6 ventole















tips are welcome, thanks

 

Hello and welcome to the forums

I've moved your thread to Modding - Planning for the minute as, unless you have pictures of work in progress, you don't have a project log.

Also, for your information, your first 10 posts will require moderation so they won't appear instantly.

GK

 

Hello George, thanks for the welcome

in reality I already have a work log and on with the job but I wanted to share it here as well if you do not mind ;-)

Hello everyone, today I took the chipboard panels and I cut the most important parts.







These will be the supports of the desk....





This panel will set the side fan ...... 3 will be on one side and 3 on the other side



this is how it goes on the bottom panel and placed the hardware





stay tuned

 

In that case I'll move it back! Nice neat work too

 

thank you very much ;-)

 

work continues ........ I cut the holes in the side panels where they will attach the 120mm fans and "probable" radiators











this is the magazine of the keyboard and mouse











;-) ;-)

 

cutting the front panel for keyboard compartment

















Stay tuned ;-) ;-)

 

I proceed with the slots dimension 5.25 DVD writer and the other ......

 

Hello everyone, I cut the rear panel to support the motherboard and power supply ......





the screws will change ......














temporary power supply




Stay Tuned ;-)

 

hello to all, work continues......sorry if some pictures are not visible but the phone sometimes does not work well ;-)

 

stay tuned ;-)

 

Cut the top panel to glass





mesh for cooling fans









and here it is attached to the wall



















ok guys what do you think? are in half the work. there still so much to do .....

 

Hi guys, a little upgrade ..... I built support for the keybinding and mouse. there is still some finishing and the bottom cap

































Stay Tuned ;-)

 

continues with the work, I have finished the top panel. now only missing the glass that comes to me next week.

 

I built the bottom plug for the keyboard compartment









gas pistons to lift the top cover







soon with new works ;-)

 

hello guys, today I built the front panel power button, reset and ignition lights







I also added 3 blue LEDs that illuminate the panel at night







I created the cover for the wires from the front panel of an old radio











ok guys, it's all for the moment .... I hope you enjoy it ;-)

 

ok guys, some up. I got the double glass is 8mm, and I have siliconized. I inserted the led lights and to test to see what effect it had, the hardware you see is temporary, slowly will buy everything and I will insert ... hope you like it

 

hello guys, today I built the front panel power button, reset and ignition lights







I also added 3 blue LEDs that illuminate the panel at night







I created the cover for the wires from the front panel of an old radio











ok guys, it's all for the moment .... I hope you enjoy it ;-)