Hello everybody , I come here to show my next modding project:G Project. This project pays tribute in the design of Logitech Gaming and Be quiet. Sponsors Be quiet Logitech Gaming France Config: _MB : Msi Z77 GA45 _CPU:Intel i5 3570K _Ramm: DDR3 4x4Go 1600Mhz _GPU: SLI GTX 770 _Stockage: SSD Raid0 2x256Go + HDD 1To _Case: Carbide 540 _Cooling: Ventilateurs 120 pwm et 140 pwm Bequiet _Ventirad: Dark Rock Pro 3 _PSU: Power 750W _Logitech: G502S Proteus Core _Surprise for the end It' my personnal config. Thanks my Sponsors. Soon... - - - Updated - - - Here is the material supplied by my sponsors: Logitech: And Be Quiet! A Big thank you goes to them. - - - Updated - - - Little presentation of Logitech G502S Proteus Core And.... Totally dismembered Do not be sad, it is for a good cause. - - - Updated - - - Let's Go Carbide 540 naked Who is in the box? Beautifull Dark Rock Pro 3 de Be Quiet! Silent Wings 2 PWM 120/140 Be Quiet! motherboard MSI Raid 0 SSD Crucial MX100 (2x256) Power Zone 750W Be Quiet Fans: Cutting Alu for SSD. Bending: Stay tuned. - - - Updated - - - - - - Updated - - - Black plastic: Cut cut cut : Adaptation : Organized the various elements: Soon... - - - Updated - - - - - - Updated - - - News : Bending morning for fans. With backlighting: - - - Updated - - - For fun - - - Updated - - - Sleeves from Veday Shop : Connecting: - - - Updated - - - The 8Pins Cpu: And 8+6 pins GPU: - - - Updated - - - Here is the depiction of sleeves getting through the mask behind the motherboard. - - - Updated - - - I test the sleeves in the case: - - - Updated - - - - - - Updated - - - Painting the backplate and inlay weights of Logitech G502S Proteus Core: check the made: - - - Updated - - - Implementation of Dark Rock Pro3 from Be Quiet!! And lacing of cables: A few days in the G Project work and here are the news: Openings for the USB port on top panel: Creating an aluminum plate on the front Create and test implementation of front: Creating an aluminum plate (brushed by me) for usb facade: Brushing by me: First tests rendering , including usb ports are backlit : Backlight slice Again thank you to my sponsors Logitech gaming and Be Quiet!! Drilling location start and reset buttons: Creating Start and Reset buttons from buttons Logitech G502 Core Proteus Painting session for SilentWings 2 PWM Bequiet! I wanted to keep the spectacular features of these silent ventilos. So discreet but visible paint. ('/ \ Repaint silentwings2 leads in noise due to the change of the contact surface; cf BeQuiet) Reassembly of the beast: a good approximation under the desk Advancing G Project 95% See you soon...,for the final Pictures of the G Project finished, but That a party Inside Outside: Armor G : With brushing by me: under the desk: Future location of my signature (not as pictured) Do not stay too far pictures "Night" will arrive shortly Shooting in the dark More picture soon with Logitech hardwares https://www.facebook.com/frost.mod