1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PSU Would this be enough to power these parts?

Discussion in 'Hardware' started by suenstar, 26 Jun 2011.

  1. suenstar

    suenstar Collector of Things

    Joined:
    13 Sep 2009
    Posts:
    2,521
    Likes Received:
    190
    Hi all,

    I'm possibly going to be grabbing a few bits to play with in the next month or so and wanted to check with the PSU experts out there if the Coolermaster Silent Pro M 700W would be enough to power the following parts:

    i5 2400 (clocked to 3.6GHz)
    8GB DDR3 7-8-7-24 (2x4GB)
    2x 560Ti 1GB OR 1x 580 1.5GB
    4x 1TB HDDs 7,200rpm, 1x 80GB SSD
    1x Optical DVD-RW

    Any thoughts on whether 700w is enough, or do I need to get a little more?
     
  2. matt_lumley

    matt_lumley You're only supposed to...

    Joined:
    28 Apr 2010
    Posts:
    1,000
    Likes Received:
    31
    I'd probably say bump it up a bit if possible, although 700W may be just about fine.

    Maybe a corsair AX850?

    Sent from my HTC Desire using Tapatalk
     
  3. thetrashcanman

    thetrashcanman Angel headed hipsters

    Joined:
    18 Nov 2010
    Posts:
    2,716
    Likes Received:
    76
    as long as its a decent power supply with the correct amps on the 12v rail or rails for the graphics card you should easily be able to power that lot whether its the 2 x 560's or a 580

    edit: oh and just a point assuming you haven't already purchased the gpu's I would go with the single 580
     
    Last edited: 26 Jun 2011
  4. suenstar

    suenstar Collector of Things

    Joined:
    13 Sep 2009
    Posts:
    2,521
    Likes Received:
    190
    The AX850 is a little pricey at nearly £150.

    So far from the reviews I've read, the Silent Pro power supply has give pretty good results for the 12v Rail.
     
  5. LennyRhys

    LennyRhys Fan Fan

    Joined:
    16 May 2011
    Posts:
    6,412
    Likes Received:
    924
    An entire system with 2x GTX560 Ti draws 450W from the wall when the GPU is stressed (source: guru3d) so 700W is overkill... like most PSUs we see in sig rigs (mine included, however it was used for GTX470 SLI for about a day :D ).

    These big PSUs sell because they are cleverly marketed - they make us think we need them, but we really don't. I'd go back to my 500W Silver Power if I hadn't voided the warranty on my Toughpower. :thumb:
     
  6. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    8,437
    Likes Received:
    1,109
    The reason I always go for a PSU way over what I need is PSU's rated output drops over time, so in a couple of years when you buy that new power hungry GPU it may go pop. Also I've found the big boys are way way quieter than smaller units, even if they're 'silent' units, as the big units will never heat up enough for the fan to need to spin up...
     
  7. TheStockBroker

    TheStockBroker Modder

    Joined:
    19 Nov 2009
    Posts:
    1,533
    Likes Received:
    110
    Slightly off topic, but just so you're aware, the 2400 cannot be overclocked.

    You'd need a 2500k or 2600k if you want to overclock.

    TSB
     
    Last edited: 26 Jun 2011
  8. Deders

    Deders Modder

    Joined:
    14 Nov 2010
    Posts:
    4,053
    Likes Received:
    106
    you want a decent 650-700W PSU with about 55A on the 12v rail(s)
     
  9. LennyRhys

    LennyRhys Fan Fan

    Joined:
    16 May 2011
    Posts:
    6,412
    Likes Received:
    924
    Good point, but definitely not always the case - I had to swap the 140mm fan in my Toughpower because even on low speed it was too noisy for my liking. But like I said you do make a good point; higher rated PSUs in lower systems don't work very hard at all and don't require significant airflow to keep them cool.
     
  10. suenstar

    suenstar Collector of Things

    Joined:
    13 Sep 2009
    Posts:
    2,521
    Likes Received:
    190
    Thanks for the feedback everyone, I might think about dropping the wattage slightly then and going for the ever so trusty Be Quiet 680W. :)

    Also thanks TheStockBroker for the heads up on not being able to overclock the 2400, I might switch that for a 2500k then. I shouldn't really need to push the clock up, but it's always fun to do.
     
  11. Drekz

    Drekz What's a Dremel?

    Joined:
    26 Jun 2011
    Posts:
    56
    Likes Received:
    0
  12. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    8,437
    Likes Received:
    1,109
    Apparently the newer Be Quiets aren't that good...
     
    Last edited: 26 Jun 2011
  13. jakobfrimmel

    jakobfrimmel What's a Dremel?

    Joined:
    2 Jan 2011
    Posts:
    317
    Likes Received:
    5
    get a corsair 850tx ... its non-modular but its a good and steady psu for a more budget market...
     
  14. darren1678

    darren1678 What's a Dremel?

    Joined:
    20 Jan 2007
    Posts:
    180
    Likes Received:
    12
    im still usiing my tagan 480watt lol

    after several upgrades

    now running a phenom 2 x6 1055t 140watt version
    ati 5770 hd heavily overclocked to 1000mhz
    4 gb of ram
    1 x 64gb ssd
    2 x 1tb hd's

    just about to add another 5770 or upgrade to tri 5850's not made up my mind

    p.s. after 5 years of loyal service the only reason im upgrading is because i need more power maybe a 700watt will cut it

    anyways your 700watts sounds about right
     
  15. Canardwc

    Canardwc @French_fab_factorie

    Joined:
    22 Sep 2011
    Posts:
    609
    Likes Received:
    184
    Hi,

    Don't know if your still asking yourself.

    Calculated with tool power supply calculator on a french website:

    CanardPC.com

    Result:

    Intel Core i5 2400 (3.10 GHz)
    - Nvidia GeForce GTX 580
    - High-End Desktop Motherboard
    - 2x 4 GB DDR3 Stick
    - 4x 3.5" SATA 7200 rpm
    - Blu-Ray Drive
    - 6x 140 mm Fan

    Max Power Dispatch :
    * +12V Rail : 37.5A
    * +5V Rail : 11.82A
    * +3.3V Rail : 10.17A

    Total Power :
    542.9 Watts




    Gaming Power Dispatch :
    * +12V Rail : 27.54A
    * +5V Rail : 8.12A
    * +3.3V Rail : 7.48A

    Total Power :
    395.9 Watts




    Idle Power Dispatch :
    * +12V Rail : 5.43A
    * +5V Rail : 4.47A
    * +3.3V Rail : 2.74A

    Total Power :
    96.7 Watts
     

Share This Page