Scratch Build – In Progress Mcrey Desk Project

After my last build The Danger Blue Project as a noob, now i came with somthing mor compleks!! Inspired from what i see and learn from overclock.ne forum and others forum about Case modding and water cooling mooding... Now I present my 2nd Project....biggrin.gif
Danger Blue Desk



Case
MCREY Danger Blue DESK

Hardware
CPU: Intel Core i7-3770K ivy bridge
Mbd: ASUS P8Z77-V DELUXE
Mem: Corsair DDR3 XMS3 Dominator PC12800 16GB Kit - CMP8GX3M2A1600C9 (4x4Gb)
GPU: Zotac Geforce GT 670 2048MB DDR5
PSU: Seasonic X750 750W Full Modular - Gold
SSD: Intel SSD 120GB 520 Series
HDD: Western Digital 1TB SATA3 64MB - Caviar Black


Water Cooling part planning:
Water Block cpu :EK-Supremacy - Nickel, - CSQ (the nickle top will chenged with TOP Plexi - Supremacy Clean CSQ)
Water Block gpu :EK-FC670 GTX - Nickel + EK-FC670 GTX Backplate - Black
Water Block ram :EK-RAM Dominator X4 - Nickel CSQ (the top will chenged with TOP Plexi - RAM Monarch X4 Clean CSQ)
pump : Laing D5 Vario 12V DC Pump (MCP 655) Strong 37 watt (planing to use dual pump, but still count my budget..biggrin.gif)
reservoir :EK-BAY SPIN Reservoir - Acetal CSQ ( Planing to changed it with two EK-RES X3 110 white)
Radiator :Magicool 180 Slim Radiator - single 180/35mm Thick

Fitting :
-Rigid Revolver Compression Fitting 3/8" x 1/2" Diamond Knurled 4 Pack - Nickel Plated Brass - Silver
-Enzotech Rotary Fitting G 1/4 Thread - Male to Male
-Bitspower Crystal T-Block - 180 Degree Water Cooling Accessory
-Bitspower Crystal L-Block


Tubbing : PrimoChill 1/2in Rigid Acrylic Tubing - 24in - Clear + 1/2in stainless steel pipe

Other Accesories
-Akust Rustless Screw #6-32 x 6.35
-Akust Rustless Screw M3x25
-Akust Rustless Screw M4x12
-ModMyToys 4-Pin Power Distribution PCB - 8-Way Block
-XSPC LCD Temperature Sensor V2 - Blue/White
-XSPC LCD Temperature Sensor V2 - Blue/White + G1/4 Plug Sensor

For fan plan, is positive air pressure, which i use :
Fans for radiator Exhaust:
-SilverStone (SST-AP181) 180 mm 130 cfm at 1200rpm 2 unit

Intake (Intake fans total 220 CFM)
-Bit Fenix Spectre Pro All-White LED Fan Series - 200mm - Blue LED 148.72 CFM 2 unit
-Xigmatek XLF-F2006 20CM White LED, 3-pin (Blue Blades) 76 CFM, 1 unit


This is The Mcrey Desk Project Sketch...Danger Blue Desk

 

Already make my 1st shopping for this project at PPcs last nigh
And this is the list of my shooping:
3 x FilterRight™ 200mm Aluminum Fan Filter (Cooler Master HAF and 840 Cases) - Clear
2 x Mod/Smart Pre-Wired Vandal Switch Cable Assembly (Spade-Style) - Momentary
- Cable: Stock Cable
- Sleeve Color: Black
- Heatshrink Color: Black
1 x Vandal Resistant Illuminated Switch 16mm - Blue Ring
- Vandal Switch Style: Momentary Switch Style (ie. Power & Reset)
1 x Vandal Resistant Illuminated Switch 16mm - Blue Dot
- Vandal Switch Style: Momentary Switch Style (ie. Power & Reset)
1 x *** NEW *** Phobya Rectangular Toggle Switch - Black with Blue LED - Unipolar
6 x Hard Disk Drive Anti-Vibration Screws - 4 Pack
1 x Ultra All Purpose Computer Assembly Screws
1 x Phobya SATA Power Y-cable SATA Socket to 2x SATA Plug 15cm - UV Reactive Blue
3 x Enzotech Rotary Fitting G 1/4 Thread - Male to Male
3 x Monsoon G1/4 Premium Silicone O-Ring 10 Pack - UV White
2 x *** NEW *** Bit Fenix Spectre Pro All-White LED Fan Series - 200mm - Blue LED
3 x Rigid Revolver Compression Fitting 3/8" x 1/2" Straight Knurled 4 Pack - Nickel Plate Brass - Silver
1 x FilterRight™ 140mm Aluminum Fan Filter - Clear
1 x Bitspower Replacement Blade for Bitspower Flow Indicator - Blue
1 x *** NEW *** XSPC LCD Temperature Sensor V2 - Blue/White + G1/4 Plug Sensor

Still a lot of things to do

 

Finally......
Finish with the design thing.......its really tiresome, since this is the first time i using google sketch!!

This is the satinless steel part ( the stucture of the table)




and this is the main part of my table..... part where i put all the pc stuff for the material i use plywood 9mm or mdf 9mm




And this is the look when i put it all together (without the glass on the top)


Done..... since i dont have tools to build the stainless steel work, next week will go to stainless steel workshop to build it!!

 

Just put some change into my desk! A suggestion just in at the right time
So i adding some lateral strength to the legs

 

i believe you are supposed to show some actual progres for it to be in the project logs forum. I am curious about how this will turn out!
maybe it would be wise to put some variable hight knobs on the bottom of the legs since you have 6. because i dont realy think you can build those legs with a precision of 0.1-0.5mm.
good luck with building

 

Skyrip

You are correct. It should be in Planning instead of scratch build until there is actual progress.

 

skyrip thanks for the advice
and Mechh69, Im actually already order the stainless steel part yesterday!

Since i dont has tool for it, so i go to stainless steel workshop to order it!! hope it will finished soon so i can posting the actual progrees!! Just wait and see hope it gonna be good! hehehe

 

The part that i wil reused from my old water cooling loop

-EK-BAY SPIN Reservoir - Acetal CSQ

-CPU Block EK Supremacy nickle CSQ

-EK Ram Domonator X4 CSQ

-EK-FC670 GTX Backplate - Black

-EK-FC670 GTX - Nickel

-Laing D5 Vario 12V DC Pump (MCP 655) 37watt

-Magicool Dual 180mm radiator

 

Quite boring to wait my new part arrived and the stainless steel part finished!!


So i made this

 

My other part from Performance-pcs has arrived



-Hard Disk Drive Anti-Vibration Screws - 4 Pack

-XSPC LCD Temperature Sensor V2 - Blue/White + G1/4 Plug Sensor

-Rigid Revolver Compression Fitting 3/8" x 1/2" Straight Knurled 4 Pack - Nickel Plate Brass - Silver

-FilterRight™ 200mm and 140mm Aluminum Fan Filter (Cooler Master HAF and 840 Cases) - Clear

-Bit Fenix Spectre Pro All-White LED Fan Series - 200mm - Blue LED

-Vandal Resistant Illuminated Switch 16mm - Blue Ring

-Vandal Resistant Illuminated Switch 16mm - Blue Dot

-Ultra All Purpose Computer Assembly Screws

-Phobya SATA Power Y-cable SATA Socket to 2x SATA Plug 15cm - UV Reactive Blue

-Enzotech Rotary Fitting G 1/4 Thread - Male to Male

-Monsoon G1/4 Premium Silicone O-Ring 10 Pack - UV White

-Bitspower Replacement Blade for Bitspower Flow Indicator - Blue

-Mod/Smart Pre-Wired Vandal Switch Cable Assembly (Spade-Style) - Momentary

-Phobya Rectangular Toggle Switch - Black with Blue LED - Unipolar



Still a lot of this to do before my stainless steel part finished

 

My order from frozen cpu and ekwb just arrived yesterday!! But i must pending my log until mid descember. My work is overloaded......

 

Finally my table almost finished

 

Impressive build so far!

Subbed

I'm sure the camera doesn't do the desk justice :/

 

Thanks bro
N yeah i take the pic just with my old phone so the pic is not really good!! But with it i can show that even with a bad quality of picture the table is still look awwwssooomeee......
But desk project always cost a lot....but the satisfaction rate is awsome

 

Excellent work so far, glad to see some physical work, though may I suggest you take some in progress photos to, love to watch it come to life.

Subbed

 

+1

Your work and your desk seem fantastic but yours pictures are so ugly !! Your work deserve better pictures

 

Ty bro, but idont have the progress photo for this tabel so far coz this stainless part is made by stainless workshop!! I will put my progress photo start from the inside part assambly!

Yeah ure right bro the pic is soo ugly!! but dont wory I already has the goot pic just wait to post!! Ure gonna like it!

 

Fair enough bud looking forward to the upcoming buildage

 

Its almost complete bro... just wait for 2 weeks!! i just ordered the acrylic part!!

 

My desk front panel was arrived.....and its little bit disaponted coz they cut it manually and its not to good in the edge.


..... I try looking for solution here...... and i found it... i use stainless steel L plate to cover around it so the bad edge will disapear and i have place to srew it to the table
and still working it today


Still lot work to do......