bit-tech.net

Go Back   bit-tech.net Forums > Modding > Project Logs

Reply
 
Thread Tools View Mode
Old 22nd Mar 2017, 09:18   #1
ciobanulx
Modder / Watercooler
 
ciobanulx's Avatar
 
Join Date: Jul 2014
Location: Sydney, Australia
Posts: 490
ciobanulx has yet to learn the way of the Dremel
Maul (modded Corsair 600C) by SimpleModz

Hi guys,

Welcome back to another one of my build logs. I'm pretty excited for this one

It will be based on Darth Maul and incorporate some interesting ideas with the Corsair 600C case!

I did a video covering the case, fully disassembling it as well as talking about the mods!

Check it out below:



SPECS:

Case - Corsair 600C
CPU - Intel Core i7 6700K or 7700K
MB - ASUS MAXIMUS VIII Extreme
RAM - 4 x 8GB Corsair Vengeance Red LED 2666MHz DDR4
GPUs - 2 x ASUS STRIX GTX 980Ti
SSD - 3 x 240GB Corsair Neutron XTi
HDD - 2 x Seagate TBC
PSU - Corsair RM850X

Custom cables and lighting - CableMod

Water cooling - Bitspower

Here are also some photos of the case to start off with





























Thanks for checking it out and stay tuned for more!

Cheers,

Alex
ciobanulx is offline   Reply With Quote
Old 4th Apr 2017, 14:06   #2
ciobanulx
Modder / Watercooler
 
ciobanulx's Avatar
 
Join Date: Jul 2014
Location: Sydney, Australia
Posts: 490
ciobanulx has yet to learn the way of the Dremel
Two of the 3 mods I'm currently working on

Maul is the one on the left in the Corsair 600C and the shell on the right is the Cooler Master MasterCase Maker 5t, this is my Tempest Mass Effect mod.



I already did some cuts in the 600C. Mainly the front panel section as well as the top. A bit more filing and tidying up of the cuts need to be done but it's coming along well so far









Stay tuned for more

Cheers,

Alex
ciobanulx is offline   Reply With Quote
Old 9th Apr 2017, 02:11   #3
ciobanulx
Modder / Watercooler
 
ciobanulx's Avatar
 
Join Date: Jul 2014
Location: Sydney, Australia
Posts: 490
ciobanulx has yet to learn the way of the Dremel
Hey guys,

I took apart the top and front panel further and did the cuts into the plastic part while I get the metal parts ready



The front panel 5.25" door cut out window



Top panel cut out window



Top panel metal part





Front panel metal parts



Thanks for checking it out and stay tuned for more!

Cheers,

Alex
ciobanulx is offline   Reply With Quote
Old 14th Apr 2017, 14:49   #4
ciobanulx
Modder / Watercooler
 
ciobanulx's Avatar
 
Join Date: Jul 2014
Location: Sydney, Australia
Posts: 490
ciobanulx has yet to learn the way of the Dremel
Stay tune for Maul









ciobanulx is offline   Reply With Quote
Old 15th Apr 2017, 14:04   #5
ciobanulx
Modder / Watercooler
 
ciobanulx's Avatar
 
Join Date: Jul 2014
Location: Sydney, Australia
Posts: 490
ciobanulx has yet to learn the way of the Dremel
Here is what I'm currently working with! Imagine the horns and eyes lighting up once the build is finished! I'm also going with a battled and worn out weathered theme as well.

Everything was cut manually with a jig saw and a lot of filing. The cut-out at the top is a small window that will look into the top compartment.

















Stay tuned for more!

Cheers,

Alex
ciobanulx is offline   Reply With Quote
Reply

Thread Tools
View Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:50.
Powered by: vBulletin Version 3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.