Hi Bit-Tech ! After my last two projects based on an Apple Cube and the PowerMac G5, I'm back for a new project ! As you probably already guessed I keep an Apple base, and this time it will be an iMac 24" ! This time, the challenge is even bigger, I will be the first one to do something like this !! So some help will not be too much !! Let's the party begin !
todo list ! - work needtofind list ! - iMac 24" glass - IEC a1225 - 24" Led monitor 16/10 (1980x1200)
[1st Update] 22.09.15 So this is the case like it is today : the first area where I will start the hardware will have 4 USB 3.0, so the firewire must leave ! the display port must be refill after a quick sanding a little spray primer shot then this is how I integrate the HDMI plug That's it, I'm still waiting to receive the others wires to continue. Stay tune !
Tks ! I use this sort of epoxy https://www.richardson.fr/IMAGES_SI...eurs/600x600/Richardson-D-00010451-RESIZE.jpg It can be used on plastic, steel or aluminum 2nd Update ! 23.09.15 As I received yesterday the ethernet extension and the audio splitter I could continue a bit on the I/O part. ready for the epoxy ! And now, I have to wait 2 hours to sand and put some primer to have look of the render.
After almost 3 weeks, I finally received my USB 3.0 extensions !! No time to waste ! Mount ! Thats it, the I/O part is now finished Now I have to find a 24" screen (16/10) to continue the project ! Stay tune !
hey ! Finally, after few attemps I received this monday, an unbroken glass !! So the project can restart, I just ordered a used display (HP ZR2440W) I hope it will fit inside