1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scratch Build – Complete Cygnus X1.

Discussion in 'Project Logs' started by Attila, 18 Sep 2008.

  1. Attila

    Attila still thinking....

    Joined:
    22 Feb 2008
    Posts:
    1,259
    Likes Received:
    239
    Hi all.,
    Been thinking about this build for a while now, and while I had all sorts
    of ideas I just couldn't settle on anything or much less get it down on
    paper. I did however have a very good idea of how the internals would
    be arranged and all the various parts and how they would fit together.
    So rather than waste more time trying to arrive at an overall look for
    the case, I decided to just start building and see what happens.
    So I'll be starting on the inside and working out. No doubt some trial and
    error will sort things out and hopefully I'll arrive at a decent looking, and
    functional result.

    All the components, that is everything, Motherboard, PSU, drives, front panel
    switches and ports will be fixed to a central assembly that will slide on bearings
    out of the case and onto the desk or other surface. The motherboard on one
    side and drives on the other. The PSU will be mounted below.
    It's probably best just to start, and although things may be a bit boring and
    confusing at the start, hopefully this worklog will become more entertaining as
    things progress.


    First up I laid out the two halves of the main component support.
    Two sheets of 1.6mm alloy.

    [​IMG]

    Then it was time to cut out the first side (motherboard tray) with the jigsaw.

    [​IMG]

    And this is it all cut out with openings for the various cables.

    [​IMG]

    I cut well wide of the line just to be safe.

    [​IMG]

    Then I filed down to the line.

    [​IMG]

    [​IMG]

    And the first side is cut and filed.

    [​IMG]

    Next the bend lines were aggressively scored.

    [​IMG]

    And I started bending on my home made brake.

    [​IMG]

    But then I realized that I should first mark and drill some holes for the motherboard standoffs,
    and screws that fit this part to some square tube. Also the brake needed some modification
    that could only be done at work, so the bending will have to wait.

    So I drilled some and countersunk some and did some test fitting with an old broken motherboard.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    While I was waiting to go to work, (and modify the brake) I decided to start on the other side.
    Much the same as the first side.

    [​IMG]

    [​IMG]

    [​IMG]

    The next day I completed the bends on the mobo tray with the now modified bending brake.

    [​IMG]

    [​IMG]

    [​IMG]

    And that's all I've done so far. :):)
     
    Last edited: 2 Dec 2009
    Kalcifer and La carotte d l'o like this.
  2. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    Fantastic start mate. Excellent work so far.
     
  3. Dark~3nergy

    Dark~3nergy what was dat sandvich ?

    Joined:
    14 Jan 2007
    Posts:
    1,424
    Likes Received:
    45
    that looks realy nice, can't wait for the next update !
     
  4. Burnout21

    Burnout21 Mmmm biscuits

    Joined:
    9 Sep 2005
    Posts:
    8,616
    Likes Received:
    197
    yay! your back to mod!
     
  5. jhanlon303

    jhanlon303 The Keeper of History

    Joined:
    7 Sep 2006
    Posts:
    9,263
    Likes Received:
    302
    I love home made tools! Could you show a couple pics of the bending brake by itself? Please?
    John
     
  6. n0cturnull

    n0cturnull Desperate to MOD!! =P

    Joined:
    30 Aug 2008
    Posts:
    33
    Likes Received:
    0
    i agree, so please do so, if you don't mind stealing some of your craftsmanship ideas :naughty:

    a very mouthwatering start, keep it up :thumb:
     
  7. craigbru

    craigbru Cramming big things in small boxes since 2006

    Joined:
    28 Feb 2008
    Posts:
    1,498
    Likes Received:
    99
    Nice metalworking!
     
  8. x06jsp

    x06jsp da ginger monkey!!!!

    Joined:
    2 Apr 2007
    Posts:
    1,651
    Likes Received:
    1
    Looks nice so far i will definitely be watching this one :D

    Josh
     
  9. wbdog206

    wbdog206 not me

    Joined:
    15 Jan 2007
    Posts:
    442
    Likes Received:
    1
    sweet.
     
  10. ModMinded

    ModMinded Are you throwing that away?

    Joined:
    26 Aug 2008
    Posts:
    1,378
    Likes Received:
    43
    Ditto on the brake pics. What did you have to modify about it?
    Subscribed
     
  11. Attila

    Attila still thinking....

    Joined:
    22 Feb 2008
    Posts:
    1,259
    Likes Received:
    239
    The boy 4rm oz
    Dark~3nergy
    Burnout21
    jhanlon303
    n0cturnull
    craigbru
    x06jsp
    wbdog206
    Thanks! :)

    Here are some pics of the brake.
    I built this just for this project so it's only big enough to make the
    bends I need. This is 600mm wide and can make bends 330mm wide
    but there is no reason why you can't make one a bit wider.
    I saw a couple of pics of this on various places on the net and as
    you can see it is very basic and easy to make (but very effective).
    This cost me nothing as I had most of the stuff already but if you
    had to go and buy the stuff it would maybe cost $30 or so.
    This is made from 3 pieces of 50x50x6mm steel angle, two heavy
    hinges, and some nuts and bolts.
    Although I had a friend do some welding and milling on this one it's not
    absolutely necessary. You can make one with just a hacksaw a drill
    and some files.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: 23 Mar 2013
  12. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    Nice work on the bending brake.
     
  13. Attila

    Attila still thinking....

    Joined:
    22 Feb 2008
    Posts:
    1,259
    Likes Received:
    239
    I had the edge of the clamp milled sharp and on a 15 degree incline because I
    couldn't get a clean 90 degree bend.
    But this is not necessary if you are willing to accept a larger radius bend.
     
    Last edited: 19 Sep 2008
  14. ModMinded

    ModMinded Are you throwing that away?

    Joined:
    26 Aug 2008
    Posts:
    1,378
    Likes Received:
    43
    Thanks for the quick answer and the pics! Didn't mean to distract you from the modding with pestering questions about your tools, but I love the ingenuity and craft of DIY, can't wait to see what comes next!

    That's a fantastic tool. Do you think the metal frame off an adjustable bed frame would be strong enough, or do you need fairly thick angle iron for basic case materials (thin alum and steel)?

    I can see from the great pics that it's basically 2 angle iron pieces joined by 2 strong hinges and attached via vice to a sturdy bench, with a third angled piece that can be dropped over the bolts and sheet to be bent to form the backstop (don't know the proper term). It looks like in your pic you have it backwards to highlight it more for us? The free flowing hinged one has got a good solid handle attached and bends to the backstop. Right?

    That looks like a sweet workshop! :dremel: And is that an anvil at the end of your workbench?
     
  15. Frenkie

    Frenkie Lets mod the world!

    Joined:
    3 Jul 2006
    Posts:
    323
    Likes Received:
    8
    Very nice self-made tool. I want one too! :)
     
  16. Attila

    Attila still thinking....

    Joined:
    22 Feb 2008
    Posts:
    1,259
    Likes Received:
    239
    The boy 4rm oz
    Frenkie
    Thanks. :)

    ModMinded:
    I wouldn't use anything less than the steel I used here.
    When bending 2mm alloy, you can really feel the strain on
    the brake.
    On the clamp, I started off using the corner because this had
    a sharper edge, but now that one edge has been milled I use
    this for the bends.

    That's a piece of railway track.,
    makes a great anvil.

    [​IMG]
     
    Last edited: 23 Mar 2013
  17. Attila

    Attila still thinking....

    Joined:
    22 Feb 2008
    Posts:
    1,259
    Likes Received:
    239
    After cutting and filing the second half (the drive side)
    I started bending but after two bends I realized "we have a
    problem".
    One of the bends was too narrow to do in the bender, it didn't
    matter how the piece was oriented, it just couldn't be done in the bender.

    [​IMG]

    So after much head scratching, a couple of scotches, dropping a clamp on
    my foot and a couple of more scotches I decided to pull the brake apart and
    improvise a very haphazard solution that made a dog of a bend.

    [​IMG]

    [​IMG]

    But after a severe beating with a mallet and block of wood, it submitted and
    turned out OK.

    [​IMG]

    The small fixing tabs on both pieces were bent using the bench vice.

    [​IMG]

    The next job is to join these two pieces together using some 12mm square
    tube. This is to join the pieces together, add some rigidity to the large flat
    areas of each piece, and create a cavity between the two sides to run cables
    through.
    Because of the bending drama wasting two hours+ I didn't have time to finish
    this but I still have one day off, so hopefully this can be done tomorrow.

    [​IMG]

    [​IMG]
     
    Last edited: 23 Mar 2013
  18. exitus

    exitus What's a Dremel?

    Joined:
    25 Apr 2007
    Posts:
    69
    Likes Received:
    0
    brilliant work!
     
  19. Jipa

    Jipa Avoiding the "I guess.." since 2004

    Joined:
    5 Feb 2004
    Posts:
    6,367
    Likes Received:
    127
    Funky design and good work so far! (no surprises here, seeing it's you making it)

    Also be aware, I may pop by and steal the lovely Dual PC Mk3 if I come to Melbourne in January... ;)
     
  20. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    This is looking really good.
     

Share This Page