Ok here's a mod I did for Gigabyte for their GESL event in Pomona, CA. I used a Silverstone SG01-Evolution case. The idea was to watercool the CPU because we all know that Ivy runs a little warmer than Sandy. So I didn't Want any heat issues down the road. Upon request from GBT I decided to try having the case airbrushed with digital camo. Its been awhile since I posted any worklogs and its about time I get caught up. So this is one of many to come. Enjoy and thanks for looking. So on with the parts! Specs - Intel i7 3770k Gigabyte Z77 Sniper M3 Gigabyte GTX680 Silverstone SG01-Evolution case Silverstone SFX450 PSU sleeved with MDPC green, tan and black Patriot Pyro SE SSD 120gb x 2 in Raid 0 Patriot Division 2 Viper Extreme 2400mhz 16gb cooling parts - Koolance CPU-370SI Water Block Koolance PMP-400 Pump Koolance Pump Nozzle & Reservoir Base for PMP-400 Koolance Misc. angles fittings FrozenQ FlexTank res. Monsoon Black compression fittings Masterkleer 1/2in clear tubing Mayhems Aurora Extinction Green liquid Black Ice 160mm Radiator Enermax White Clutster 80mm fans x 5 Pics coming soon.
Ok so here's some pics peeps!! This is the SG01-Evolution case Ok so I'm gonna be changing a few things and taking things out like 5.25 bay and HD cage. Here I changed the feet out for the MNPCTECH billet aluminium feet. I'll also be adding another 80mm fan for better airflow in case above GPU. Here I proceded to hand drill out some holes to match left and right side. SO MUCH FUN!!! Then I drilled another 80mm fan hole. Finished all those holes..... Yay!! With the front removed you can see the piece of mirror acrylic that I decided to cut away some of it so I can put a grill here in front of my fans and rad. here you'll see the SEXY Sniper M3 with the Intel 3770K in the stripped down case. I used my break to bend a bracket for my rad support. came out pretty good... Now time to lay out the wcing before the case goes for paint! Thank you FrozenQ for the FlexTank it fits perfect! Now time to sleeve some wires with MDPC sleeve..... Until next time.....
Like the sleeving. Nice job drilling all those wholes, it looks original. I am also looking forward to seeing this one finished.
Thanks. Here's a teaser of it in action on Newegg Tv. Enjoy. http://www.youtube.com/watch?v=k5lQ7i-HMPE&feature=youtube_gdata_player
Ok so I better get on with this log before it never gets done! Here is how it looks after some cool airbrush work from my friend Nano Ok so on with the build. Time for some hardware.... As you can see its a very tight fit with the GTX680 Here I added some Mayhem Aurora Exstinction Green liquid. Here you can see again how much measuring I had to do to make sure all would fit. I installed the top brace and fan cradle with not a cm to spare.... Time to wire manage the PSU and install. Thats it for now. Still need to install SSD's.
Ok so I'm gonna finish this finally... One thing I forgot to plan for was the two Pyro SSD's so this first pic was not gonna work... Here's installing windows This is better for the SSD's Front shot with glass installed again. Final pics... Thats it for now I'll post some pics from PAX Prime on display.
