Oh God, What have I gotten myself into? - Page 5 - bit-tech.net Forums

Cheapskate · 3rd Jul 2009, 17:33

That thing's bolted to the ground!:P It's connected to the grid too. When I see it patrolling Iraq I'll give it my approval.

-And they should have built Zeta Gundam. It looks cooler.

I'm guessing Ryan found either girls or weed... or both.

Sir Digby · 4th Jul 2009, 09:49

Quote:

Originally Posted by Cheapskate

I'm guessing Ryan found either girls or weed... or both.

I think he discovered the latter just before starting this thread

Ryan Cooper · 29th Jul 2009, 17:31

Hey Guys. I have not killed myself, found girls nor weed. I'm just working. I have detained myself from writing much because, well, not much is completed. The "Power plant" is about 21% complete. and ill give you a hint- its a thermoelectric generator powered by hydrogen.

Ryu_ookami · 29th Jul 2009, 18:17

Quote:

Originally Posted by Stickeh

Right, but where is the power supply going to be situated? Somewhere on your body i presume, so your gonna have this massive hot heatsource, right next to your body?

well if he puts the power source in his crotch when it over heats and seriously burns him when he goes to the hospital for emergency surgery the doctors could tape the operation and name it "saving ryan's private's"

/I'll get my coat.

Gunter · 29th Jul 2009, 18:22

He´s alive, oh god.....
Good to see you keep doing some job, maybe tony stark I was thinking that he kidnapped you.

Keep on going man.

sentek · 29th Jul 2009, 19:43

Quote:

Originally Posted by Ryu_ookami

well if he puts the power source in his crotch when it over heats and seriously burns him...

darwin awards nomination? :P

capnPedro · 29th Jul 2009, 19:50

Quote:

Originally Posted by Ryan Cooper

I have not found girls nor weed.

Look harder!

Ryu_ookami · 29th Jul 2009, 19:51

Quote:

Originally Posted by sentek

darwin awards nomination? :P

considering what he is trying to build his nomination has probably already been written out and just tacked to an awaiting notification wall somewhere.

Ryan Cooper · 30th Jul 2009, 00:01

Quote:

Originally Posted by Ryu_ookami

considering what he is trying to build his nomination has probably already been written out and just tacked to an awaiting notification wall somewhere.

No, just committed. Lot harder to do research there.

g3n3tiX · 30th Jul 2009, 16:50

Not meaning to be offensive, but I'm sure you know that the military have been trying (and achieving) to make exoskeletons, but only for parts of the body, and not really for jumping over buildings and flying around...we're quite not at the Iron Man level of perfomance !

And they're not using just scrap.

Cheapskate · 31st Jul 2009, 02:03

Remember: The guy who invented the hydrogen fuel cell died mysteriously... If you come up with a cheap, portable fuel replacement, the energy industry will break both your legs!

sixfootsideburns · 31st Jul 2009, 03:07

Quote:

Originally Posted by Cheapskate

Remember: The guy who invented the hydrogen fuel cell died mysteriously... If you come up with a cheap, portable fuel replacement, the energy industry will break both your legs!

oh they'll do more than that... lol

http://www.youtube.com/watch?v=efCelx7qe_M

take a look into this. Though it wont be NEARLY enough to power flight for the suit a small version might very well be used to power the many of its components if you make it that far.

again mate, you may be quite ambitious but i say go for it!

Andersen1337 · 3rd Nov 2009, 15:53

How's this project coming along? Thread seems pretty dead ;/.

Smilodon · 3rd Nov 2009, 16:36

Quote:

Originally Posted by Andersen1337

How's this project coming along? Thread seems pretty dead ;/.

Gee, I wonder why...

wgy · 3rd Nov 2009, 17:39

amazing thread, i lol'd.

please, make a youtube video dairy of your daily findings and progress.

im curious.

Ryan Cooper · 14th Nov 2009, 15:31

Don't worry, It isn't dead. I just don't have a Hollywood-type artist/designer here to speed things along, and I don't have that kind of artistic aptitude or the millions of dollars needed for one, Money is exchanged for time. Don't Worry, it WILL come.

Stickeh · 14th Nov 2009, 20:09

What's an artistic design got to do with anything....prototypes aren't supposed to be flashy colourful artistic or stylish.... nothings ever coming out this thread.

capnPedro · 14th Nov 2009, 20:54

Seriously, not even a CAD drawing by now?

On a related note, I have 5 micro servos I need to drive. When they're all moving they consume ~1.5A. A year ago I built a small 1A breadboard power supply because I though that's all I'd ever need (and I had the parts). I shudder to think how you'd power this creation!

Cheapskate · 15th Nov 2009, 02:12

Quote:

Originally Posted by capnPedro

I shudder to think how you'd power this creation!

Hamster wheel generator!!!!!

Ryan Cooper · 15th Nov 2009, 03:48

I do happen to have some CADs, but they're PEP files.... And Im learning how to work with that.

3rd Jul 2009, 17:33	#81
Cheapskate know-it-all b*stard... Join Date: May 2007 Location: Texas Posts: 3,993	That thing's bolted to the ground!:P It's connected to the grid too. When I see it patrolling Iraq I'll give it my approval. -And they should have built Zeta Gundam. It looks cooler. I'm guessing Ryan found either girls or weed... or both. __________________ BlooBalls·Hypnotoad·Plank·Reservoir-Things·AluBox Chopping·C7Waterblocks·GlassGreen Powered by: Danger Den·Hardware Labs

29th Jul 2009, 17:31	#83
Ryan Cooper cout << "I am not here." << endl; Join Date: Jun 2008 Location: I don't know... But its really hot here. Posts: 138	Hey Guys. I have not killed myself, found girls nor weed. I'm just working. I have detained myself from writing much because, well, not much is completed. The "Power plant" is about 21% complete. and ill give you a hint- its a thermoelectric generator powered by hydrogen. __________________ I'm back baby!

30th Jul 2009, 16:50	#90
g3n3tiX Resident frenchie Join Date: Jun 2006 Location: localhost Posts: 593	Not meaning to be offensive, but I'm sure you know that the military have been trying (and achieving) to make exoskeletons, but only for parts of the body, and not really for jumping over buildings and flying around...we're quite not at the Iron Man level of perfomance ! And they're not using just scrap. __________________ I also have a MTBF.

31st Jul 2009, 02:03	#91
Cheapskate know-it-all b*stard... Join Date: May 2007 Location: Texas Posts: 3,993	Remember: The guy who invented the hydrogen fuel cell died mysteriously... If you come up with a cheap, portable fuel replacement, the energy industry will break both your legs! __________________ BlooBalls·Hypnotoad·Plank·Reservoir-Things·AluBox Chopping·C7Waterblocks·GlassGreen Powered by: Danger Den·Hardware Labs

14th Nov 2009, 15:31	#96
Ryan Cooper cout << "I am not here." << endl; Join Date: Jun 2008 Location: I don't know... But its really hot here. Posts: 138	Don't worry, It isn't dead. I just don't have a Hollywood-type artist/designer here to speed things along, and I don't have that kind of artistic aptitude or the millions of dollars needed for one, Money is exchanged for time. Don't Worry, it *WILL* come. __________________ I'm back baby!

29th Jul 2009, 18:22	#85
Gunter Multimodder Join Date: Feb 2009 Location: Bagé, Brazil Posts: 118	He´s alive, oh god..... Good to see you keep doing some job, maybe tony stark I was thinking that he kidnapped you. Keep on going man.

3rd Nov 2009, 15:53	#93
Andersen1337 Modder Join Date: Apr 2009 Posts: 61	How's this project coming along? Thread seems pretty dead ;/.

3rd Nov 2009, 17:39	#95
wgy Multimodder Join Date: Jul 2008 Posts: 213	amazing thread, i lol'd. please, make a youtube video dairy of your daily findings and progress. im curious.

14th Nov 2009, 20:09	#97
Stickeh Help me , Help you. Join Date: Jul 2003 Location: Nottingham Posts: 2,574	What's an artistic design got to do with anything....prototypes aren't supposed to be flashy colourful artistic or stylish.... nothings ever coming out this thread. __________________ Guns don't kill people, kids who play videogames kill people.

14th Nov 2009, 20:54	#98
capnPedro Deaf forever to the battle's din Join Date: Apr 2007 Location: North-East England Posts: 2,990	Seriously, not even a CAD drawing by now? On a related note, I have 5 micro servos I need to drive. When they're all moving they consume ~1.5A. A year ago I built a small 1A breadboard power supply because I though that's all I'd ever need (and I had the parts). I shudder to think how you'd power this creation! __________________ ASUS M4A785TD-M Evo \| AMD Phenom II x4 955 BE \| D-Tek FuZion 4GB Corsair XMMS3-10666 \| Corsair TX650 Point Of View 8800GTX \| EK FC-8800

15th Nov 2009, 03:48	#100
Ryan Cooper cout << "I am not here." << endl; Join Date: Jun 2008 Location: I don't know... But its really hot here. Posts: 138	I do happen to have some CADs, but they're PEP files.... And Im learning how to work with that. __________________ I'm back baby!

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts