Hello world, I come to you to present my new project named Tiger First objectif : Having this configuration for DreamHack 2015 in the city of Tours in the month of May Configuration : - Boitier : Bitfenix Shinobi noir sans vitre - CPU : Intel Core i7 4790k - Carte Mere : Gigabyte GA-Z97-OC " - RAM : 16gb Avexir Blitz 1.1 - Carte Graphique : Gigabyte GTX 770 OC - Alimentation : Corsair RM 750 - HDD : 2 SSD crucial 128Gb - Refroidissement : CoolForce Color of the theme - Orange - White - Black So I started working out on white sheets to already take the hand with the airbrush and also have a glimpse of what it will give . Here are my first attempts at painting : - 1st test : - 2nd test : - Both for choice : - The future cutting the left side which will be glazed by the following : - Paint : - My guardian for cutting ..... My little tiger " Moumoun " like " moomoon - Cutting : - Small passage primer : - The choice of my fans for this mod : Cougar Vortex 120 and 140mm - My first cuts: We do not forget the glasses with the dremel !!!! I just received the psu I ordered and also the cable kit I won on the Facebook page CableMod a kit Orange / Black visible in a previous post . walk a little on the mod I removed everything inside " the support of the motherboard, HDD cage and 5-inch bay " , I gained some space , I finished making the system opening scratched facade , it remains for me to sand the inside to remove the rail system. This leaves me sticking this one on my opening system , do the cutting of plexi to scratch and then we will attack a little paint . I have yet to realize the plans on Solidworks for the plate which will host the motherboard and also the host of the two tanks I bought . I also bought two tanks, one EK radiator and my sweetie with a complimentary EK pump so I advance on the project that will be a reminder for OP DreamHack . I finished this weekend painting TEST an SSD , I'm just finishing the plans in 3D motherboard support , I also finished removing the rim of the scratched face I can fix it on the opening system , there will me more than to buy powerful magnets to create the binding. Before : After modding : That all for the moment. see you guys Facebook : https://www.facebook.com/phenomdesignphotography
This is Phenomenal work there! (See what I did there?) Seriously though, your painting and marking skills are on point! Can't wait to see the rest of this!
Some news !!! for first thanks a lot for your comment i received some pieces : first mounting to see : I painted the fan covers and tank support and primer set many thing tomorrow I will still have a job in painting. I also finished fixing both SSD and pump. I place an order for two sata cable 15 cm It remains for me to wait for the fittings and tubing normally and tomorrow I get a sample of a piece I had printed in 3D with the 3D printer taf . I need to do some adjustement and go print 4 pieces : 1 TIGER 1 EDITION 2 with i line like the support of tanks. That all guys see you later.
Here the final photo of the mod Tiger Share and like on my facebook page Phenom Design & Photography Thanks To my Sponsor : Intel France Avexir Memory Gigabyte France CableMod CoolForce Bitfenix See you soon.
