hello...i am a user of bit-tech and i see many awsome modd and scratch build and now i want to do my own all in one pc with touch screen hardware in use mobo: rampage 3 gene cpu: socket 1366, i7 980 vga: evga gtx 460 1gb ddr5 ddr 3 : kingston 3x 4gb 1600mhz , 3x2gb 1600mhz hdd : 2x320 gb raid 0 , 2 tb WD cooling: corsair h100 psu : corsair tx 650M monitor in use is a lg 19" standard 1280x1024 with elo touch screen
So, where are actual pictures, progress on the build etc.? This is not really a build log, but a proposed build.
monitor frame is almoust done...now to test monitor to see if it work sorry for my bad english...i dont speak english for about 10 years now...
Looking good so far! I suspect weed2all's posts are stuck in a moderation queue. I want to see how you mount the pc on the back of the screen
a litle update...i dont have much time to work on my project an update to bottons control of the monitor spacers to install the motherboard installing motherboard video card supporte
that is all for now...update soon...i will mount de corsair h100 cpu cooler and hdd then i will make a base to seat my pc...
keep it up, you're going in the right direction, thought maybe you shpuld turn the gpu around so that it can get fresh air from the outside instead of pre-warmed air from the other components?
hy there kelmannen...i have thinking that on the gpu, but it will occupies a lot of space because the pci-e extender...the right way a think is this...thought i will istall a few small fans maybe 60x60 or smallest for the air circulation
yeye, got you there the intake fans might be a good idea but 60mm fans do often have very bad noise levels :/
If you flip the GPU you should be able to mount some cross flow fans in the chassis that can be controlled by the GPU board to keep it cool. That way you could take the cover off and slim it down some. But like kelmannen said I'd definitely flip the GPU, even then you could show it off a little
i will try on a 60mm and smallest like 40mm fan...after testing i will decide wich i use...for now i will resume to finish entire case...i think to use acrylic to make the protection of entire pc...