1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Project Maximus Design

Discussion in 'Project Logs' started by fireisdangerous, 9 Feb 2013.

  1. fireisdangerous

    fireisdangerous What's a Dremel?

    Joined:
    2 Sep 2011
    Posts:
    44
    Likes Received:
    0
    Project Maximus Design

    Decided to take on a new project for two reasons, firstly it was time to replace the fluid in my system and give all the parts a good clean and secondly i saw the new Fractal Design Arc Midi R2 and new i needed it!!!

    To cut a long story short i have also ended up with a new motherboard, new pump, new fittings, new fans etc. To make these purchases i have sold a few parts i had left lying around and once i replaced the system i will have more bits to sell!

    New parts are:

    Asus Maximus Gene V

    D5 pump with Bitspower mod kit and pump top

    Bitspower Blood Red Barbs

    Bitspower Matt Black D plug

    Mayhems Black Pastal Fluid

    6 Corsair Hight pressure low nose fans

    Xspc Tubing

    Fractal Design Arc Midi R2 (when it is released)


    Existing Parts i am re-using

    Ek supremacy cpu block

    i5 2500k

    2 Evga 570 SC card with Full EK water blocks and backplates

    1 XSPC rs 240 rad

    1 XSPC rx 240 rad

    XSPC Bay res and custom white faceplate

    Corsair AX850 psi with White braided cables

    8gb Corsair Black LP memory

    8gb Corsair Red LP memory[/FONT]


    I have spent today draining my rig taking all the parts out and giving them a good old clean. Not much i can do now until i get my hands on the New Fractal Design Midi R2, still waiting on a release date. Im going to take loads of pictures tomorrow of all my new and cleaned equipment as.

    But here is a teaser :)

    [​IMG]
     
    Last edited: 10 Feb 2013
  2. tekonivel

    tekonivel Minimodder

    Joined:
    14 Jul 2012
    Posts:
    120
    Likes Received:
    2
    Love it allready. will be following.
     
  3. fireisdangerous

    fireisdangerous What's a Dremel?

    Joined:
    2 Sep 2011
    Posts:
    44
    Likes Received:
    0
    As promised here are some pictures :)

    Let start with some more motherboard pics.

    [​IMG]

    Some GPU shots.

    Both are evga 570 superclocked editions, had them for a couple of years and they still destroy any games, with the full ek blocks, they look so much nicer than the new circle design in my opinion.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    My Faithful rads and my XSPC bay res with custom white facia.


    [​IMG]

    Cosair AX850 with white sleeving


    [​IMG]

    New D5 pump with bitspower top and mod kit.

    I sleeved the cables but they wouldnt fit through the holes at the back so may just leave the cables as they wont be seen in the build anyway.

    [​IMG]

    [​IMG]



    And last pictures is for the wife really :)


    [​IMG]
     
  4. amagriva

    amagriva Minimodder

    Joined:
    13 Jun 2009
    Posts:
    312
    Likes Received:
    3
    ok nice parts but where is the modding?
     
  5. fireisdangerous

    fireisdangerous What's a Dremel?

    Joined:
    2 Sep 2011
    Posts:
    44
    Likes Received:
    0
    Need to wait for the case before I can do any modding :)
     
  6. Elenos

    Elenos What's a Dremel?

    Joined:
    11 Feb 2013
    Posts:
    19
    Likes Received:
    1
    Nice collection of parts. A bit premature posting a build log for a case that isn't release yet?

    Either way I'll pop back in and take a look when it starts coming together :)
     
  7. AverageNinja

    AverageNinja Almost an EpicNinja

    Joined:
    6 Aug 2012
    Posts:
    429
    Likes Received:
    21
    Nice parts mate! Though I agree with Elenos, it's a bit early to post a build log and have to wait for an unreleased case before starting.
     
  8. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    i cant see any pictures :S
     

Share This Page