How to make BENCH CASE from an old ATX My earlier threads in this forum was 2x CORSAİR 900 D (fulltower)an 800D ,an Level 10 GT, TJ O7 and a JUMBO CASE…all fulltowers This time a small case and a fast mod at weekend.. My friend atik wanted a smal bench case ,and not to spend Money. only with products ready in the kitchen. we used an old cheap atx case We planned what to do and what kind of a bench. Then we have overthrowed the case Emptied the case.. I had planned watercooling with a 360 rad ,but he wanted to use his 480 XSPC rad. 480 Rad was greater than the case.and As this was not enough he wanted to use as push-pull and with dobble fan shroud I made a front cover to the case for 480 rad. .but as an unusual fun shroud. , it was 60(120/2) +120 +120 +60(120/2) And he wants the pump and reservoir outside of the case , like 480 Rad. I made a tower for reservoir and pump at the side of the case, to use a tube reservoir 250 mm.. but he used a mini xspc reservoir at beginning.but he promised me to buy a 250 mm. And mounted to the case But a new request from my frend. He wants to use DWD player and a fan controller at the front.. A new front cover for dwd player,fan controller and 480 rad.. I did all wrong requests of my friend… We wanted to mount the MB tray on the side door of ATX , and open it with a gas spring arm. But the side door of the case was too thin.for a gas spring arm.. ı made a 5 mm thick Alu side cover with 2 hinges. [/IMG] Today frozen cpu and mnpc uses it…on their new experiment case.. ı used the same gas spring arm on my JUMBO case too. To open the upper part of the case. OTHER WORKLOGS PlayDoh Silverstone TJ07 - Acrylic tubing http://forums.bit-tech.net/showthread.php?t=267324 SAK SAK 900 D CASE http://forums.bit-tech.net/showthread.php?t=271227 JUMBO CASE http://forums.bit-tech.net/showthread.php?t=266554 TERMINATOR CASE http://forums.bit-tech.net/showthread.php?t=267028 12 Angry Men 900 D Case http://forums.bit-tech.net/showthread.php?t=266585 mmt 900D Case http://forums.bit-tech.net/showthread.php?t=266954 ER36PO Level 10 GT - Acrylic tubing http://forums.bit-tech.net/showthread.php?t=269227 self made COSMOS II Clear Panel http://forums.bit-tech.net/showthread.php?t=277478 only mini worklogs at hot AUGUST days.. it is better to work at beach Greetings from Fethiye /Turkey arg-ist
Hey, I know that rig. Towers converted to benches seem to be trending, but you have put a lot more care and effort into yours. It should turn out pretty cool.
And bench was painted black My frend uses a lot of HDD s. He needs an HDD cage . ı used side panels of cages and modde it added 2 alu plates and made a great HDD cage. And cooled with a fan As MB tray and expansion slots we used the tray of the case. For tubing we used some 90 degr. angled clips To mount DWD player made a shelf from plexi And dwd mounted And mounted MB And watercooled What was wrong at this case: Using an 480 rad instead of 360. instead an 360 rad mounted at the inside of the case,mounting outside , instead of swiftech micro res… a 250mm reservoir ugly glossy black paint And working with quite large folds of the hose would it be better like this but we must cook with , what we have in the kitchen as ready. and spend no Money… And my friend was the boss. SORRY.