Scratch Build – In Progress Iron Revenge II (By Herodj) - Sleeving!

hi guys, i'm back!

next the first edition of my mod, i want to start the second edition of my Iron Revenge.... there's the first iron: http://forums.bit-tech.net/showthread.php?t=216456

now, there i want to create a new case different from the first mod....

There I build a chassis with iron's tubolar and varius aluminium plate, etc. I want to have a modular structure, fast to build/disassemble!

start to mod!!

while i wait to build the frame i start with little work.... cut the first plate of aluminium!

there's the cut what I want to do!



now, go!!



and this is the first result.... i must finish it!





so, modify it!



finish the first plate!!







for today, that's all! What do you think??


Big thanks to my sponsor!


Bye bye
Hero

 

anyone??

now go ahead with the mod! Today I have welded the frame! The frame meausure 40 x 50 x 20 and builded with 2cm x 2cm of iron's tubolars!

That's the photos!





and now i can mount the power supply bracket!



Now I cut the first plate.... An aluminium plate of 0.8mm!!

Take the measure



Cut and test it on the frame!





the first plate is completed, next i'm going to glue it on the frame but after the painting!

That's all fot today
Bye bye!

 

Good notices for you, i have a sponsor!!



continue with the mod.... now i have get a mobo tray!!



and try it on the case....





next i'm going to cut a plate for it

so, i want to weigh all....



not much for the moment ....

 

Now i have get some sheet metal waste free

There are steel sheets of 1.5mm ....



start to cut and sand the first plate!!



That's a good difference!



and try it on the frame!



....

Ready to cut!!



for the cut i'm going to use these dremel wheels!



Yeesss!!




....

 

The second steel sheet is for the mobotray....




Try the tray!





having 2 minutes of spare i'm going to try some led effects on the case...





....

that's all for the moment.... what do you think about??

bye bye

 

I like the look of this one...Nice metal work skills.

 

Thank you bull!

 

i second bulljeff =) godd skills and small full atx =)

 

Thanks kelmannen

Thank you Crapman



So, in the evening new up!

 

too long time that i don't up my thread! Sorry

ok, now i start to cut a scrap of metal sheet.... give some meausure!



and now cut!



Bend it!







fix all in the case!





i wanted to leave 1cm for a thing that you can see next!


behind, the metal sheet is supported by 2 angulars...



so, fo today that's all!

bye bye!

Hero

 

so, continue with the up on my worklog!

i want a front panel different from standard.... i want to have a good air flow for my fans!

Idea







first tests of bend!



what i want!





now, that's all!!

See you soon

 

Oooh!
I am always in awe of the people working with steel - that stuff is hard to cut, hard to shape, and hard to do anything with really. Very nice work so far, and I'm looking forward to see how this evolves. Excellent.

 

Great Mod needs a strong frame

 

so, the steel is hard to work when you haven't the right tools....
Thank you so much Journeyer

Yes kappa!! A stron frame!

 

Good morning all!

Today i show you some up!

start whit this metal strip that meausure 4mt x 10cm and 0.8mm.... I'm going to use this depth to bend better the other "spine"!



I divide the strip in 4 pieces to have more manageability!



and now i cut in 16 pieces!







and next i trace the other cuts!

from this.....



to this!







......

 

- Bending -

after cutting i'm going to bend all spines...

that's the result!



hold they....





and do some hold at the structure...



and now with rivets i'm going to fix all spines...









for the moment this is all...
I wait your comments

Hero

 

a lot of work always pays off , nice man very nice

 

It`s what like should the SilverStone Raven look! Dangerous case

 

also reminds Aerocool Predator.

but steel scales better