1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

i7-3930k 1k ppd more than i7-2600k

Discussion in 'bit-tech Folding Team' started by Scorpuk, 7 May 2012.

  1. Scorpuk

    Scorpuk Minimodder

    Joined:
    10 Jan 2012
    Posts:
    725
    Likes Received:
    10
    Both running at stock speeds.

    At most the i7-3930k was 11k ppd more than the i7-2600k today. (32k ppd v 21k ppd)

    i7-2600k is running Ubuntu 12.04
    i7-3930k is running under VM with Ubuntu 10.10 on Windows 7 64bit.

    Might try a usb boot to Ubuntu at the weekend and see what I get.


    Any suggestions?
     
  2. RedFlames

    RedFlames ...is not a Belgian football team

    Joined:
    23 Apr 2009
    Posts:
    15,416
    Likes Received:
    3,010
    try ubuntu 12.04, and try the -lowlatency kernel if you haven't already

    but a 50% increase [from 50% more cores/threads] looks about right from where i'm sat, any improvements SB-E has over SB will most likely negate the effects of the 3930's slightly lower clock speed...

    and it's loads better than what i'm getting from my knackered 920
     
  3. Scorpuk

    Scorpuk Minimodder

    Joined:
    10 Jan 2012
    Posts:
    725
    Likes Received:
    10
    The computer must have been up to something as its now back up to 33k ppd on the i7-3930k. :geek:

    mmmm back up to 101k ppd overall.

    Still got a q6600 to build from spare parts. Just need a case. :thumb:


    Edit: no idea what -lowlatency kernel is. Can you explain? Tnx.
     
  4. RedFlames

    RedFlames ...is not a Belgian football team

    Joined:
    23 Apr 2009
    Posts:
    15,416
    Likes Received:
    3,010
    [all this is assuming a bog standard ubuntu install]

    ubuntu installs the linux-generic kernel by default, from precise [12.04] onwards there's a linux-lowlatency [previously linux-rt iirc] kernel. It can lag update wise behind the generic one though.

    type
    Code:
    sudo apt-get install linux-lowlatency linux-headers-lowlatency
    to the console to install [or do it via package manager of choice]

    it should ask you to choose which kernel you want to use during startup [if not you'll have to press esc during startup if memory serves], and you can check which kernel you're using the console:

    Code:
    uname -r
     
    Last edited: 7 May 2012
  5. Scorpuk

    Scorpuk Minimodder

    Joined:
    10 Jan 2012
    Posts:
    725
    Likes Received:
    10
    Cheers RedFlames.

    I'll give it a go at the weekend. :)
     
  6. debs3759

    debs3759 Was that a warranty I just broke?

    Joined:
    10 Oct 2011
    Posts:
    1,769
    Likes Received:
    92
    I used to get around 25K @ 5 GHz on a 2700K. When I'm not benching with it, I get over 50K @ 4.6 GHz on a 3930K.
     
  7. Scorpuk

    Scorpuk Minimodder

    Joined:
    10 Jan 2012
    Posts:
    725
    Likes Received:
    10
    I tried to follow the overclcoking guide in the mag, but the vcore temp just kept on going up. I eventually rebooted and reset the bios when it hit 90°C.

    Reading was from Asus AI suite II on my Sabretooth X79 m/b.
     
  8. the_kille4

    the_kille4 Chaos will rule da world.eventually

    Joined:
    28 Aug 2009
    Posts:
    215
    Likes Received:
    5
    Hmmm... might as well go to the 4.7GHz route. I did try it out previously and it did work out 24/7. Although I am quite happy with the 30k ppd I am getting though. But, I would really want to get into the top 20 producers thingy before I hit one mil so shouldn't be too difficult.
     

Share This Page