Carbon Li at the Computex **Tampei**. - Page 12 - bit-tech.net Forums

Ediejo · 9th Mar 2007, 21:24

@Jipa, the name for the case is carbon li. So the outside is Lian Li. The inside is real carbon. So if you think it’s going over a bit. I understand that.

@Computerking, thanks.

RonaldoR9 · 10th Mar 2007, 01:46

ic that sucks that thier making green pcb 8800gtx those dont look anyware as nice as the black ones so i don tknow why they bother making them

l0cke · 10th Mar 2007, 01:49

I just read this thread and this mod looks awesome!

Ediejo · 10th Mar 2007, 14:01

Today I continue with the side panels. First drill some little holes.

And that’s fit.

To protect the airbrush also a side panel on that side.

And that’s fits also.

On both side a panel for the symmetry.

See you soon

Supra55 · 10th Mar 2007, 14:13

Looks cool.

Ediejo · 10th Mar 2007, 17:15

And there is the second update from today. Continue with the double bottom.

Next thing the reset and on off switch.

But it’s fit.

Also at the front it looks well

And the tubing.

Where that tape for is, you see it later.

See you soon.

Supra55 · 10th Mar 2007, 18:48

Very nice work so far!

Jipa · 10th Mar 2007, 21:00

Is that a Proxxxon you're using to drill? Freehand-drilling the end of a acryl with a "dremel" damn you have a steady hand and some nerves

Ediejo · 10th Mar 2007, 22:15

The tape is for marking the bottom of the plexi.

Than mark the holes.

After that it’s drill time.

Than place the plexi back and drill the plexi from the other side.

It was hard but it’s fit.

The place for the pump. It will be free from the cd-rom.

Some glue work to do.

Also for the front.

That’s dry tomorrow.

And marking the hole for the power and s-ata cables.

@Jipa, yes that’s a proxxon.

See you tomorrow.

Ediejo · 11th Mar 2007, 11:43

This morning mounting the pump.

This is the place for the pump.

Sometimes you need luck, ore……

When i place the cover there is enough space for the tubes and cables.

See you later today.

Duste · 11th Mar 2007, 13:15

Pump looks ugly compared to the rest of the case. :/

Ediejo · 11th Mar 2007, 14:05

Quote:

Originally Posted by Duste

Pump looks ugly compared to the rest of the case. :/

But you don't see him so......

Koradhil · 11th Mar 2007, 14:06

I think you wont be able to see them anyway.

Ediejo · 11th Mar 2007, 15:21

And there am I again.

The last time that I put in the main board to mark some things.

All the led’s from the cover plate do it now.

Nvidia say al the time two is better than one.

Corsair can now say four is better than two.

The tings what I will do today. The holes for the power cables.

And this connector needs some more space.

When I finishing this today it will be great. Than tomorrow place the harddisken and fill up the water cooling

See you later.

Higgins · 11th Mar 2007, 18:03

Looks very impressive, nice detailwork! Keep up the good work.

Ediejo · 11th Mar 2007, 20:39

The last update for today.

I keep the cables for the main board on there place with tie raps.

That Nvidia logo is boring me because it’s standing upside down.

That’s better.

Corsair sends a couple of pci-e cables. I will use them.

I place them here.

Short cables are left.

That’s all for today.

The led’s in the bottom are standing loose, because I must take them out tomorrow. For the water cooling.

And an mp4 from the cdrom.

See you soon.

wbdog206 · 11th Mar 2007, 21:21

coming along very nicely
very clean and unclutterd

sparkyftw · 11th Mar 2007, 21:28

damn that is looking nice

JAxen · 13th Mar 2007, 16:04

There is some sick modding going on in this thread!
Keep on keeping on..

Ediejo · 13th Mar 2007, 23:29

Ready for the Cebit.
1 led say do it by your self.

Zoom

Zoom

Next photo’s are from the Cebit.

9th Mar 2007, 21:24	#221
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	@Jipa, the name for the case is carbon li. So the outside is Lian Li. The inside is real carbon. So if you think it’s going over a bit. I understand that. @Computerking, thanks. __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret

10th Mar 2007, 14:01	#224
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	Today I continue with the side panels. First drill some little holes. And that’s fit. To protect the airbrush also a side panel on that side. And that’s fits also. On both side a panel for the symmetry. See you soon __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret Last edited by Ediejo; 2nd Sep 2007 at 10:21.

10th Mar 2007, 17:15	#226
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	And there is the second update from today. Continue with the double bottom. Next thing the reset and on off switch. But it’s fit. Also at the front it looks well And the tubing. Where that tape for is, you see it later. See you soon. __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret Last edited by Ediejo; 2nd Sep 2007 at 10:22.

10th Mar 2007, 21:00	#228
Jipa Licenced idiot. Join Date: Feb 2004 Location: Tampere, Finland Posts: 3,069	Is that a Proxxxon you're using to drill? Freehand-drilling the end of a acryl with a "dremel" damn you have a steady hand and some nerves __________________ Abit IP35 - E6750 - 8800GT 1024 MB - 2 GB 800 MHz - enough HDDs - 750 W Silverstone - CM Storm Sniper Asus P5Q-VM - Q9450 - 4 GB - 400 W Silverstone - Fortress FT01 AllTheMods - MetkuMods - LedCalc

10th Mar 2007, 22:15	#229
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	The tape is for marking the bottom of the plexi. Than mark the holes. After that it’s drill time. Than place the plexi back and drill the plexi from the other side. It was hard but it’s fit. The place for the pump. It will be free from the cd-rom. Some glue work to do. Also for the front. That’s dry tomorrow. And marking the hole for the power and s-ata cables. @Jipa, yes that’s a proxxon. See you tomorrow. __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret Last edited by Ediejo; 2nd Sep 2007 at 10:22.

10th Mar 2007, 01:46	#222
RonaldoR9 Multimodder Join Date: Dec 2006 Posts: 96	ic that sucks that thier making green pcb 8800gtx those dont look anyware as nice as the black ones so i don tknow why they bother making them

10th Mar 2007, 01:49	#223
l0cke Minimodder Join Date: Sep 2005 Location: Colorado Posts: 29	I just read this thread and this mod looks awesome!

10th Mar 2007, 14:13	#225
Supra55 Banned Join Date: Oct 2006 Location: Texas Posts: 423	Looks cool.

10th Mar 2007, 18:48	#227
Supra55 Banned Join Date: Oct 2006 Location: Texas Posts: 423	Very nice work so far!

11th Mar 2007, 11:43	#230
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	This morning mounting the pump. This is the place for the pump. Sometimes you need luck, ore…… When i place the cover there is enough space for the tubes and cables. See you later today. __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret Last edited by Ediejo; 2nd Sep 2007 at 10:22.

11th Mar 2007, 13:15	#231
Duste Sierra my delta, bravo! Join Date: Oct 2006 Location: WA, Australia Posts: 812	Pump looks ugly compared to the rest of the case. :/

11th Mar 2007, 14:06	#233
Koradhil Supermodder Join Date: Nov 2004 Location: Hengelo, The Netherlands Posts: 406	I think you wont be able to see them anyway. __________________ » BRAND NEW SITE Projects: Nimex \| Gemini \| Aquamedia \| Mystique \| Orion \| Protoss Powered by A.C.Ryan, Cooler Master, Corsair, EPoX, PQI, Recom, Revoltec, Sapphire.

11th Mar 2007, 15:21	#234
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	And there am I again. The last time that I put in the main board to mark some things. All the led’s from the cover plate do it now. Nvidia say al the time two is better than one. Corsair can now say four is better than two. The tings what I will do today. The holes for the power cables. And this connector needs some more space. When I finishing this today it will be great. Than tomorrow place the harddisken and fill up the water cooling See you later. __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret Last edited by Ediejo; 2nd Sep 2007 at 10:23.

11th Mar 2007, 18:03	#235
Higgins What's a Dremel? Join Date: Mar 2007 Posts: 1	Looks very impressive, nice detailwork! Keep up the good work.

11th Mar 2007, 20:39	#236
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	The last update for today. I keep the cables for the main board on there place with tie raps. That Nvidia logo is boring me because it’s standing upside down. That’s better. Corsair sends a couple of pci-e cables. I will use them. I place them here. Short cables are left. That’s all for today. The led’s in the bottom are standing loose, because I must take them out tomorrow. For the water cooling. And an mp4 from the cdrom. See you soon. __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret Last edited by Ediejo; 2nd Sep 2007 at 10:24.

11th Mar 2007, 21:21	#237
wbdog206 Don't mind me. Join Date: Jan 2007 Location: In the middle of nowhere Posts: 373	coming along very nicely very clean and unclutterd __________________ Of all the things I have lost, I miss my mind the most.

11th Mar 2007, 21:28	#238
sparkyftw Multimodder Join Date: Nov 2006 Location: Minnesota Posts: 89	damn that is looking nice __________________ Project: (insert name here) -The mod no one cares about (even me)

13th Mar 2007, 16:04	#239
JAxen Multimodder Join Date: Nov 2005 Location: Sweden Posts: 243	There is some sick modding going on in this thread! Keep on keeping on..

13th Mar 2007, 23:29	#240
Ediejo Supermodder Join Date: Jul 2005 Location: Holland Posts: 419	Ready for the Cebit. 1 led say do it by your self. Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Zoom Next photo’s are from the Cebit. __________________ Carbon Li 100% ready and going to Computex 08 with Point of View. Project Extreme Lian Li 100% ready Project Extreme Lian Li II Top Secret Last edited by Ediejo; 2nd Sep 2007 at 10:25.

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts