Silver Dragon "Watercooler" Pag17 - bit-tech.net Forums

ulysses Cazuquel · 1st Apr 2007, 01:12

As it had promised I am in return with a new project using as main subject known dragons beyond the painting of 3 effects that will be used

Here this picture of the architecture of the cabinet that I will use where his main quality this in the laterals ones that are totally flat contributing to me not to have any problem to do my cuts

Here this the image of my first cut already printed of the two dragons that I will start cuts it in the next
week

Damouse · 1st Apr 2007, 01:46

very nice dragon design, i like i like!

argh i hate zoomable pics... could you not? The dragons are too cool for me to avoid this thread

Bas van der Werff · 1st Apr 2007, 14:08

What brand & type of case is that?

ulysses Cazuquel · 3rd Apr 2007, 00:17

Today it was the day of leaving the lateral ready for the cut tomorrow
I began sanding all lateral ties to be in the metal
Then I made the demarcation to put the drawing of the dragon so that each dragon was perfectly in the same height was very difficult, but obtained success!!
Now it just lacks to remake some lines and to start the cut tomorrow

ulysses Cazuquel · 8th Apr 2007, 04:25

here the first and only image of the cuts of the dragons therefore now only when it will be finished

Bas van der Werff · 8th Apr 2007, 11:59

Quote:

Originally Posted by Bas van der Werff

What brand & type of case is that?

And?

dan-ere-07 · 8th Apr 2007, 12:50

Nice cuts keep it up !!

ulysses Cazuquel · 11th Apr 2007, 01:53

ulysses Cazuquel · 12th Apr 2007, 20:53

stormshadow · 12th Apr 2007, 21:16

omfg. nice

ssR · 12th Apr 2007, 21:20

awesome stuff dude. you got probably one of the best if not the best dremeling skills i've seen on those forums

dan-ere-07 · 13th Apr 2007, 16:34

wow the best side panle ive seen well done

JAxen · 14th Apr 2007, 20:27

mawd skillz!!

picio71 · 14th Apr 2007, 20:42

very nice dragon design, i like

ulysses Cazuquel · 21st Apr 2007, 04:25

I finished the cuts today them dragons and with them they had been more than 90 cut record

bigger resolution

Fozzy · 21st Apr 2007, 05:01

That's some damn good cutting

ulysses Cazuquel · 21st Apr 2007, 18:37

image effect cut dragons

TapperSwe · 21st Apr 2007, 18:44

Very nice work

Raziekiel · 21st Apr 2007, 20:19

Quote:

Originally Posted by ulysses Cazuquel

image effect cut dragons

WOW. Thats all I can say...

ulysses Cazuquel · 22nd Apr 2007, 02:52

here an image you to see before and later and seeing the care that I had with the details

1st Apr 2007, 01:12	#1
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259	Silver Dragon "Watercooler" Pag17 As it had promised I am in return with a new project using as main subject known dragons beyond the painting of 3 effects that will be used Here this picture of the architecture of the cabinet that I will use where his main quality this in the laterals ones that are totally flat contributing to me not to have any problem to do my cuts Here this the image of my first cut already printed of the two dragons that I will start cuts it in the next week Last edited by ulysses Cazuquel; 5th Feb 2009 at 23:59.

1st Apr 2007, 01:46	#2
Damouse Multimodder Join Date: Jan 2007 Location: Over the Rainbow Posts: 197	very nice dragon design, i like i like! argh i hate zoomable pics... could you not? The dragons are too cool for me to avoid this thread __________________ Dummm. Last edited by Damouse; 1st Apr 2007 at 23:44.

1st Apr 2007, 14:08	#3
Bas van der Werff Multimodder Join Date: Feb 2007 Location: Netherlands Posts: 228	What brand & type of case is that? __________________ Radical Fusion update [9th June 07] If you're putting more blood into you're project than sweat, double check that you're holding the tool correctly.

12th Apr 2007, 21:20	#11
ssR Carbon God Join Date: Aug 2006 Location: Israel Posts: 586	awesome stuff dude. you got probably one of the best if not the best dremeling skills i've seen on those forums __________________ Galleries: My DeviantArt \|\| My PhotoLight Gear: A620 \|\| 50D+BG-E2N \|\| Canon EF 17-40 F/4L USM \|\| Canon EF 50mm F/1.8 II \|\| Canon EF 85mm F/1.8 USM \|\| Canon EF 100mm F/2.8 Macro USM \|\|Canon 70-200 F/4L IS USM \|\| Sigma 10-20mm F/4-5.6 EX DC HSM \|\| Manfrotto 055xprob with 804RC2 head \|\| Canon Speedlite 430EX II

14th Apr 2007, 20:42	#14
picio71 What's a Dremel? Join Date: Sep 2004 Location: Italy Posts: 14	very nice dragon design, i like __________________ ItaliaModding.it Staff => My project ..:: - P.I.L.S. - Spiderman - Red Devil PC - Picio's PSU - ::..

3rd Apr 2007, 00:17	#4
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259	Today it was the day of leaving the lateral ready for the cut tomorrow I began sanding all lateral ties to be in the metal Then I made the demarcation to put the drawing of the dragon so that each dragon was perfectly in the same height was very difficult, but obtained success!! Now it just lacks to remake some lines and to start the cut tomorrow

8th Apr 2007, 04:25	#5
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259	here the first and only image of the cuts of the dragons therefore now only when it will be finished

8th Apr 2007, 12:50	#7
dan-ere-07 Supermodder Join Date: Mar 2007 Location: East Midlands, UK Posts: 288	Nice cuts keep it up !!

11th Apr 2007, 01:53	#8
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259

12th Apr 2007, 20:53	#9
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259

12th Apr 2007, 21:16	#10
stormshadow What's a Dremel? Join Date: Mar 2007 Posts: 10	omfg. nice

13th Apr 2007, 16:34	#12
dan-ere-07 Supermodder Join Date: Mar 2007 Location: East Midlands, UK Posts: 288	wow the best side panle ive seen well done

14th Apr 2007, 20:27	#13
JAxen Multimodder Join Date: Nov 2005 Location: Sweden Posts: 243	mawd skillz!!

21st Apr 2007, 04:25	#15
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259	I finished the cuts today them dragons and with them they had been more than 90 cut record bigger resolution

21st Apr 2007, 05:01	#16
Fozzy Ultramodder Join Date: Jan 2005 Location: Olympia, WA Posts: 1,386	That's some damn good cutting __________________ Sponsors: http://www.koolance.com/images/homeimage01.jpg http://www.dangerden.com/templates/r...eader-wide.jpg http://i233.photobucket.com/albums/e...age00001-2.jpg

21st Apr 2007, 18:37	#17
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259	image effect cut dragons

21st Apr 2007, 18:44	#18
TapperSwe Supermodder Join Date: Nov 2006 Location: Sweden Posts: 253	Very nice work __________________ Build done:The Legacy of King Khufu: http://forums.bit-tech.net/showthread.php?t=129157 Speakers Done: http://forums.bit-tech.net/showthrea...129157&page=11

22nd Apr 2007, 02:52	#20
ulysses Cazuquel Casemodding Make You Even!!! Join Date: Apr 2006 Location: brazl Posts: 259	here an image you to see before and later and seeing the care that I had with the details

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts