bit-tech.net

ulysses Cazuquel · 12th Sep 2007, 21:30

the images are not with good quality more serve to show the function of the acrylic supports well that I made

The main reason of I to have bred these acrylic supports was so that the illumination of leds in the letters was more the possible uniform and this to obtain

Tomorrow I finish with a finishing and am deciding if young chicken or not them acrylic supports

support glue in the metal

withdrawal of the glue excess

illumination test

ulysses Cazuquel · 14th Sep 2007, 20:54

Done finishing and ready for the painting

Acrylic supports spotted

Pigment of effect of the Merck that will be using in the ink silver
Next week I go to paint parts of the cabinet to see the result of the effect

ulysses Cazuquel · 18th Sep 2007, 00:50

It can seem the same photos but they are not and the reason of I to paint was again because I did not like the form that the ink was on the cut

Tomorrow I must it finishes to another lateral and also to make the finished painting

ComputerKing · 18th Sep 2007, 03:29

This is so professional work! I love the clean and perfect work you do! this dragons RULE@!%^ Do it and complete it , hey what about that tons of holes? What they do

well done

Teyber · 18th Sep 2007, 04:07

i THink all the holes are for the led's. Nice work my friend

ulysses Cazuquel · 18th Sep 2007, 21:25

Quote:

Originally Posted by ComputerKing

This is so professional work! I love the clean and perfect work you do! this dragons RULE@!%^ Do it and complete it , hey what about that tons of holes? What they do

well done

ComputerKing, Acrylic supports made for me for leds

Thanks Very Much Teyber,

ulysses Cazuquel · 29th Sep 2007, 19:43

ulysses Cazuquel · 30th Sep 2007, 00:36

widmod · 30th Sep 2007, 14:18

great detail work there

ulysses Cazuquel · 30th Sep 2007, 18:20

Quote:

Originally Posted by widmod

great detail work there

Image supplied for the Merck manufacturer of the pigment Arctic fire showing the effect that they are Turquoise / Silver / Red / Gold.

The result of the painting with the pigment arctic fire painted by me

ulysses Cazuquel · 6th Oct 2007, 01:07

connectors mike's for adaptation that I will make in the necessary cabinet because the spower supply able was dislocated for low

ulysses Cazuquel · 10th Oct 2007, 00:31

ulysses Cazuquel · 10th Oct 2007, 03:32

Dean MF · 10th Oct 2007, 05:23

Hey ulysses, everything looks great so far! But I think you need to paint that fan grill the same as the case. It looks out of place at the moment.

ulysses Cazuquel · 11th Oct 2007, 02:01

adaptation of finished connectors and plugs

ulysses Cazuquel · 20th Oct 2007, 20:40

the stage is to sandpaper the mass that I used to place the letters in the cabinet

The mass that used to fix the letters Chinese at the case does not set well with that and I will have to try another way
Initially the way I found was putting the letters in a metal mold, and paste in case

This solution I am making to put the letters Chinese
First put a metal plate in the case
After I made the mark and cut
I put the letters and already have photos
This week I paint this part of the case

I am preparing the inside of the Case for painting
That resolved the problem I had the weight that used to hold the letters using a piece of metal and glue
The result was great

Asulc · 21st Oct 2007, 19:49

I want to see components in that case!
You have god-like dremel skills!

Just an idea, but maybe you could paint the inside of the case the same color, or just black?

ulysses Cazuquel · 21st Oct 2007, 22:06

Quote:

Originally Posted by Asulc

I want to see components in that case!
You have god-like dremel skills!

Just an idea, but maybe you could paint the inside of the case the same color, or just black?

Thanks Asulc

paint the inside of the case the same color The side

Support for the leds tested only specifying the installation of 27 white LEDs that make this week along with the painting of the inside of the cabinet

ulysses Cazuquel · 28th Oct 2007, 20:53

Part of the inner cabinet painted
The result was very good
It has more photos

zhangmaster12 · 28th Oct 2007, 20:57

you are a BEAST!

18th Sep 2007, 03:29	#184
ComputerKing Join Date: Sep 2006 Location: Dubai\|Alexandria Posts: 4,164	This is so professional work! I love the clean and perfect work you do! this dragons RULE@!%^ Do it and complete it , hey what about that tons of holes? What they do well done __________________ GigaByte Triton 180\|GigaByte EP45-UD3R\|Intel Q9450\|8GB 1066Mhz\|Sapphire 3870X2\|Creative X-FI ExtremeGamer\|Enermax Galaxy DXX 1KW\|Samsung 2220WM\|Thermalright Ultra-120 eXtreme\|7TB Space The King Of CK Appreciation Society Group

29th Sep 2007, 19:43	#187
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	Last edited by ulysses Cazuquel; 29th Sep 2007 at 21:09.

30th Sep 2007, 14:18	#189
widmod Supermodder Join Date: Oct 2006 Location: AUSTRIA Posts: 417	great detail work there __________________ Project GTA IV PC : Modding the case and NEW hardware. Gaffa-Tape is a very simple modding device I will not apologize for my language skills

10th Oct 2007, 05:23	#194
Dean MF PC Freak! Join Date: Apr 2007 Location: Ladysmith, South Africa Posts: 516	Hey ulysses, everything looks great so far! But I think you need to paint that fan grill the same as the case. It looks out of place at the moment. __________________ My PC: ECS KA3MVP Extreme Motherboard : AMD Athlon 64 X2 Dual Core 6000+ : 4 x 512mb DDRII 667mhz RAM : Radeon X1950 PRO GPU : 320 gig SATA2, 120 gig SATA2, 80 gig IDE : Raidmax Volcano 620W PSU : LG 18x DVD Writer with Lightscribe

20th Oct 2007, 20:40	#196
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	the stage is to sandpaper the mass that I used to place the letters in the cabinet The mass that used to fix the letters Chinese at the case does not set well with that and I will have to try another way Initially the way I found was putting the letters in a metal mold, and paste in case This solution I am making to put the letters Chinese First put a metal plate in the case After I made the mark and cut I put the letters and already have photos This week I paint this part of the case I am preparing the inside of the Case for painting That resolved the problem I had the weight that used to hold the letters using a piece of metal and glue The result was great Last edited by ulysses Cazuquel; 20th Oct 2007 at 20:50.

bit-tech.net

Site Links

Our Other Sites

12th Sep 2007, 21:30	#181
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	the images are not with good quality more serve to show the function of the acrylic supports well that I made The main reason of I to have bred these acrylic supports was so that the illumination of leds in the letters was more the possible uniform and this to obtain Tomorrow I finish with a finishing and am deciding if young chicken or not them acrylic supports support glue in the metal withdrawal of the glue excess illumination test

14th Sep 2007, 20:54	#182
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	Done finishing and ready for the painting Acrylic supports spotted Pigment of effect of the Merck that will be using in the ink silver Next week I go to paint parts of the cabinet to see the result of the effect

18th Sep 2007, 00:50	#183
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	It can seem the same photos but they are not and the reason of I to paint was again because I did not like the form that the ink was on the cut Tomorrow I must it finishes to another lateral and also to make the finished painting

18th Sep 2007, 04:07	#185
Teyber ****** Join Date: Mar 2007 Posts: 1,369	i THink all the holes are for the led's. Nice work my friend

30th Sep 2007, 00:36	#188
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344

6th Oct 2007, 01:07	#191
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	connectors mike's for adaptation that I will make in the necessary cabinet because the spower supply able was dislocated for low

10th Oct 2007, 00:31	#192
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344

10th Oct 2007, 03:32	#193
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344

11th Oct 2007, 02:01	#195
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	adaptation of finished connectors and plugs

21st Oct 2007, 19:49	#197
Asulc Learning to mod Join Date: Jul 2007 Location: United States Posts: 397	I want to see components in that case! You have god-like dremel skills! Just an idea, but maybe you could paint the inside of the case the same color, or just black? __________________ ~Asulc~

28th Oct 2007, 20:53	#199
ulysses Cazuquel Sex, Casemod & Rock'N Roll!!! Join Date: Apr 2006 Location: brazl Posts: 344	Part of the inner cabinet painted The result was very good It has more photos

28th Oct 2007, 20:57	#200
zhangmaster12 Hypermodder Join Date: Jun 2006 Location: U of IL Urbana-Champaign Posts: 874	you are a BEAST! __________________ Project Dimension 2400

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts