3rd Feb 2008, 08:42
|
#1 |
|
dat steak
Join Date: Jan 2006
Location: SW1H
Posts: 13,519
  |
Res Design #2
Been thunking about my new Res design for watery, so without delay...:
(the only thing thats accutate exactly is the outer size of the res and the thickness) Allthough you can't tell by the res, the holes at the top with the plugs, will actually be 11.8mm holes with a G1/4" tap at the top.. Last but not least, they aren't on the res, but there will be 8 holes in the outer side of the res, so that I can connect it directly to the case... The res...:    Any ideas? |
|
|
|
3rd Feb 2008, 22:08
|
#2 |
|
hmmmm....
Join Date: Aug 2005
Location: New Zealand
Posts: 3,146
|
Looks good. Is it going to be made from a thick sheet of acrylic with the pattern cut out and then thinner acrylic in front and behind to seal it?
__________________
France just seems small, because it's so easy to conquer
|
|
|
|
3rd Feb 2008, 22:25
|
#3 |
|
I like wood ಠ_ಠ
Join Date: Apr 2007
Location: Wisconsin
Posts: 7,379
|
^^if you read the second pic it says what it is^^
Looks pretty sweet 
__________________
- i7 3770k - MSI Z77A-GD65 - EVGA GTX 570 - 8Gb G.Skill Sniper (1.25v) - Fractal R3 Black - Corsair H50 - Corsair 750HX - Samsung 830 128Gb SSD - 6 Samsung F4EG 2TB - 2 WD Black 1TB - 2 WD Black 750GB - Dell UltraSharp U2410 - WASD V1 Custom - IBM Model M SSK - KBC Poker (Ergo-Clears) - Logitech Mx518 & G500 - Audio Technica AD700 - Logitech Z4 - Windows 7 Pro -
|
|
|
|
|
3rd Feb 2008, 22:27
|
#4 |
|
hmmmm....
Join Date: Aug 2005
Location: New Zealand
Posts: 3,146
|
Ah so it does, my bad.
__________________
France just seems small, because it's so easy to conquer
|
|
|
|
|
3rd Feb 2008, 22:32
|
#5 |
|
I like wood ಠ_ಠ
Join Date: Apr 2007
Location: Wisconsin
Posts: 7,379
|
most of us miss stuff like that
no biggy 
__________________
- i7 3770k - MSI Z77A-GD65 - EVGA GTX 570 - 8Gb G.Skill Sniper (1.25v) - Fractal R3 Black - Corsair H50 - Corsair 750HX - Samsung 830 128Gb SSD - 6 Samsung F4EG 2TB - 2 WD Black 1TB - 2 WD Black 750GB - Dell UltraSharp U2410 - WASD V1 Custom - IBM Model M SSK - KBC Poker (Ergo-Clears) - Logitech Mx518 & G500 - Audio Technica AD700 - Logitech Z4 - Windows 7 Pro -
|
|
|
|
|
4th Feb 2008, 19:57
|
#6 |
|
dat steak
Join Date: Jan 2006
Location: SW1H
Posts: 13,519
|
 Final design.. Ying and Yang (ish) with smooth and jagged... The Green loop is quite restrictive so that the DDC doesn't make too much noise.. |
|
|
|
|
4th Feb 2008, 20:18
|
#7 |
|
Boobs, I have them, you lose.
Join Date: Jul 2007
Location: Michigan, USA
Posts: 2,129
|
I'm not yet very knowledgeable as far as water cooling is concerned. Just been doing research, etc. for setting up my first loop. One thing that occurred to me when looking over your designs: will what you've laid out assist or hinder removal of air bubbles that form in the system? Really liking your ideas very much.
|
|
|
|
|
4th Feb 2008, 20:29
|
#8 |
|
dat steak
Join Date: Jan 2006
Location: SW1H
Posts: 13,519
|
I don't know really. I've tried to use flat surfaces on the res's so that no bubbles can collect, but I'ts going to be trial and error I think. Having the two port on each loop will allow easy top-ups (they aren't on the second res due to laziness)..
|
|
|
|
|
4th Feb 2008, 20:36
|
#9 |
|
dat steak
Join Date: Jan 2006
Location: SW1H
Posts: 13,519
|
Right, res included and hose#d up. No more cos i'm bored stupid by this now
    
|
|
|
|
|
4th Feb 2008, 22:24
|
#10 |
|
I like wood ಠ_ಠ
Join Date: Apr 2007
Location: Wisconsin
Posts: 7,379
|
OMG '91 you just made my day
That is my water block you're using
__________________
- i7 3770k - MSI Z77A-GD65 - EVGA GTX 570 - 8Gb G.Skill Sniper (1.25v) - Fractal R3 Black - Corsair H50 - Corsair 750HX - Samsung 830 128Gb SSD - 6 Samsung F4EG 2TB - 2 WD Black 1TB - 2 WD Black 750GB - Dell UltraSharp U2410 - WASD V1 Custom - IBM Model M SSK - KBC Poker (Ergo-Clears) - Logitech Mx518 & G500 - Audio Technica AD700 - Logitech Z4 - Windows 7 Pro -
|
|
|
|
|
5th Feb 2008, 06:45
|
#11 |
|
dat steak
Join Date: Jan 2006
Location: SW1H
Posts: 13,519
|
I know... It was the only 775 block that I could find!
(its also rather nice
|
|
|
|
|
5th Feb 2008, 22:10
|
#12 |
|
I like wood ಠ_ಠ
Join Date: Apr 2007
Location: Wisconsin
Posts: 7,379
|
thanks, it really means alot to me to see if models is being used or not
__________________
- i7 3770k - MSI Z77A-GD65 - EVGA GTX 570 - 8Gb G.Skill Sniper (1.25v) - Fractal R3 Black - Corsair H50 - Corsair 750HX - Samsung 830 128Gb SSD - 6 Samsung F4EG 2TB - 2 WD Black 1TB - 2 WD Black 750GB - Dell UltraSharp U2410 - WASD V1 Custom - IBM Model M SSK - KBC Poker (Ergo-Clears) - Logitech Mx518 & G500 - Audio Technica AD700 - Logitech Z4 - Windows 7 Pro -
|
|
|
|
|
6th Feb 2008, 09:22
|
#13 |
|
ex-Bit-Tech code junkie
Join Date: Mar 2001
Location: Oxford, UK
Posts: 8,178
|
Personally think it would be cool to mount the DDC up against the res.
|
|
|
|
|
6th Feb 2008, 13:25
|
#14 |
|
Where's the any key?!?
Join Date: Oct 2006
Location: Tennessee
Posts: 1,217
|
I actually liked the first on better. Not to say the final isn't cool, but the first looked not as "hectic". is it supposed to say anything?
__________________
Just as you touch the lives of every life form you meet, so, too, will their energy strengthen you. Fail to live up to your potential, and you will never win... - Gaspar, The Guru of Time Project: Andromeda CurseMyStuff.com |
|
|
|
|
6th Feb 2008, 17:25
|
#15 |
|
Will it blend?
Join Date: Jan 2008
Location: Farnborough!
Posts: 66
|
You gonna use the blue res for a gpu loop? Looking Ace
=D
|
|
|
|
 |
| Tags |
| cooling |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
|
All times are GMT. The time now is 14:37.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
