bit-tech.net

Skorchio · 17th Oct 2009, 19:07

Well after a long 19 months its final at a stage where I can say its finished for now.

Hope you enjoy this small selection of photos, I plan to do a full write up very soon.

Thanks
Skorchio

Skorchio · 17th Oct 2009, 19:07

Progress Shots from through out the thread.

Skorchio · 17th Oct 2009, 19:07

Progress Video 1

Progress Video 2

As some of you know I have wanted a TJ07 for some time, I now have one. Most of you didn’t know that I have been planning my TJ07 build for nearly a year and I have many drawings and idea, so here goes...

Some key features:
Gloss white case with gloss white internals.
3 loops, 3 shades of blue.
3 DDC pumps with Res Tops.
Illuminated floor
White Cable

Here are some drawings to give you a slight idea

although other plans are unsure as i want to keep this open to new ideas.

Skorchio · 17th Oct 2009, 19:11

Just purchased the final rad i need PA120.2 (thanks PD) so now the rads will be used as follows.
PA120.3 - CPU + NB
PA120.2 - GPU
XSPC 120 - SB + VRM's

Skorchio · 17th Oct 2009, 20:10

Ok here she is, part modded buy Alun who i bought it from.

First off this thing needs to come off, it ripped all the paint off as it was stuck on like hell!

I put the PSU and rad it so I could get a feel for how they are going to sit. Should be able to get both rads down here no problems.

I then set about putting in the mobo on the mobo tray, you can also see from this pic the result of taking off the foam pad. As this polished up so nice, I might polish the whole backing of the mobo tray.

I then made a template for the pumps so I could see how they would go and how much room i would have. As you can see (from this angle) you can see much of the 3rd pump so i may be extending the window out, I think I will have to also extend out the other way so you can see all the pipe coming out the floor.

Put the mirror acrylic on the GFX card to see how this would work.

Other cards in and another possible mirror.

This is where im going to have to cut both drive bay hangers (its the very faint line bang in the middle). Cutting it here will leave me with 2 mounting holes down the side so should be nice a secure. This is where the 3rd rad and HDD's will be.

bigsharn · 17th Oct 2009, 21:30

Jesus Christ, you've been here all of 5 minutes and you've already got a project log up

And it involves a TJ07

And I've accidentally the subscribe button

Skorchio · 17th Oct 2009, 21:34

haha thanks mate

I done the easy bits now, its going to be a long job on the others, why i had to build a new rig for aion!

Thanks for looking

Edit
I also wont be using them fans some nice shiny new onces me thinks!!

samkiller42 · 17th Oct 2009, 21:45

ooo, Sam likes, got a TJ07 myself, and have something in mind.
I asume you will be putting a rad on the top? If so, whats the clearence like between a rad/fan and the motherboard? As from what i can see, it will be very tight, but i maube wrong.
Bring on more updates.

Sam

Ninja Edit: You could call it 'Blue Thunder'?

DragunovHUN · 17th Oct 2009, 22:04

Quote:

Originally Posted by Skorchio

My current gaming rig...

Hey look, a floppy drive! That's something you don't see every day.

Skorchio · 17th Oct 2009, 22:21

There is 2 actuly! But i only have one power connecter for it and the ribbon dont reach *giggles*

Im not having a rad at the top Sam, but here is a photo to help you plan your build, the vernier is set to 50mm. As you can see you have a few MM spare.

Edit

Make that 50.6mm hehe

samkiller42 · 17th Oct 2009, 22:51

Thanks, i shall be keeping an eye on this one, inspiration can only be a good thing no?

Sam

Skorchio · 17th Oct 2009, 22:55

Of course

all i hope to have it going allong at a good pace, there are many mods that will take time tho

subset7 · 18th Oct 2009, 12:33

Nice start Scorch,good luck with the rest of the build

bagman · 18th Oct 2009, 12:53

can't wait to see more of this build

Djayness · 18th Oct 2009, 13:02

Epic drawing skills
I thought your watercooling looked like fallopian tubes (or at least what id like to think theyd look like )
This project needs a name
Awesome work mate, ill subscribe and stick around for it!

Cheers!

Skorchio · 18th Oct 2009, 13:42

Thanks Sub, nice to see so many faces i know!

Dj, thanks, there are more drawings comming on monday so watch this space

Somone said "Blue ray" which i quite like, but it wont even have a blue ray player!

With the 3 resses it kinda looks like a production factory or lab.

Making Blue?
Blue Refinary?

Hmm.

Skorchio · 19th Oct 2009, 09:37

As its going to have dark blue , blue and clear, and there will be a “clean” white and illuminated floor i think i want to go along the lines of cleaning the blue out of the water.

Cleansing
Purifying blue
Purify <<<<<<<<<<, oww i really like this?

What you guys think to Purify?

bagman · 19th Oct 2009, 10:05

it's monday i want pictures now!!

Skorchio · 19th Oct 2009, 12:33

Ok Ok Bagman, here you go

I just got off lunch and finished the Rad+HDD drawing. This shows how i will be mounting the HDD's and rad in the drive bays. I will be using 4mm alli with m2 screws.

Hdd's
Big sheet along the bottom of the two chopped down drive bay mouts to make a clean look. Then two rectangles perpendicular to this base for the mounting, depending on rigidity I may extend them bits and put a brace on the top.

Rad
Very simple, 2 strips of 4mm alli with holes in bolted to the rad, simples.

Another update
I bought a pump and res yesterday so I should get the tomorrow. I can then see how room I will have drive bay wise so I can cut them and get the above drawing built.

Bullitdodger · 19th Oct 2009, 18:17

I want a TJ-07....

17th Oct 2009, 19:07	#1
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	.:Filtration:. - Finished - New Video Well after a long 19 months its final at a stage where I can say its finished for now. Hope you enjoy this small selection of photos, I plan to do a full write up very soon. Thanks Skorchio Last edited by Skorchio; 22nd Apr 2011 at 14:39. Reason: .:Filtration:.

17th Oct 2009, 19:07	#2
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	Progress Shots from through out the thread. Last edited by Skorchio; 29th Jan 2011 at 18:15.

17th Oct 2009, 19:07	#3
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	Progress Video 1 Progress Video 2 As some of you know I have wanted a TJ07 for some time, I now have one. Most of you didn’t know that I have been planning my TJ07 build for nearly a year and I have many drawings and idea, so here goes... Some key features: Gloss white case with gloss white internals. 3 loops, 3 shades of blue. 3 DDC pumps with Res Tops. Illuminated floor White Cable Here are some drawings to give you a slight idea although other plans are unsure as i want to keep this open to new ideas. Last edited by Skorchio; 14th Apr 2011 at 16:24.

17th Oct 2009, 20:10	#5
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	Ok here she is, part modded buy Alun who i bought it from. First off this thing needs to come off, it ripped all the paint off as it was stuck on like hell! I put the PSU and rad it so I could get a feel for how they are going to sit. Should be able to get both rads down here no problems. I then set about putting in the mobo on the mobo tray, you can also see from this pic the result of taking off the foam pad. As this polished up so nice, I might polish the whole backing of the mobo tray. I then made a template for the pumps so I could see how they would go and how much room i would have. As you can see (from this angle) you can see much of the 3rd pump so i may be extending the window out, I think I will have to also extend out the other way so you can see all the pipe coming out the floor. Put the mirror acrylic on the GFX card to see how this would work. Other cards in and another possible mirror. This is where im going to have to cut both drive bay hangers (its the very faint line bang in the middle). Cutting it here will leave me with 2 mounting holes down the side so should be nice a secure. This is where the 3rd rad and HDD's will be. Last edited by Skorchio; 2nd Nov 2009 at 21:06.

17th Oct 2009, 21:30	#6
bigsharn Officially demotivated Join Date: May 2008 Location: bit-tech forums... usually Posts: 2,603	Jesus Christ, you've been here all of 5 minutes and you've already got a project log up And it involves a TJ07 And I've accidentally the subscribe button __________________ {Rolling on a 1990s Dawes Galaxy} {Nikon D80, 18-55 f/3.5-5.6G and 50mm f/1.8}{Lomo Smena 8M}{Olympus OM10, 50mm f/1.8, 28mm f/2 and 135mm f/3.5}

bit-tech.net

Site Links

Our Other Sites

17th Oct 2009, 19:11	#4
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	Just purchased the final rad i need PA120.2 (thanks PD) so now the rads will be used as follows. PA120.3 - CPU + NB PA120.2 - GPU XSPC 120 - SB + VRM's

17th Oct 2009, 21:34	#7
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	haha thanks mate I done the easy bits now, its going to be a long job on the others, why i had to build a new rig for aion! Thanks for looking Edit I also wont be using them fans some nice shiny new onces me thinks!!

17th Oct 2009, 21:45	#8
samkiller42 Considered for President!! Moi?? Join Date: Apr 2006 Location: Portchester Posts: 5,522	ooo, Sam likes, got a TJ07 myself, and have something in mind. I asume you will be putting a rad on the top? If so, whats the clearence like between a rad/fan and the motherboard? As from what i can see, it will be very tight, but i maube wrong. Bring on more updates. Sam Ninja Edit: You could call it 'Blue Thunder'? __________________ The Laptop: Dell Vostro 3450, SB i3 2350m, 8GB DDR3, 256GB 830 SSD, Intel 6235 Wifi N/BT 4.0, Dell 5550 3G/GPS The Server: Phenom 2 x6, 8GB DDR3, 3TB Seagate, 2TB WD Green, 2*1TB Samsung F1

17th Oct 2009, 22:21	#10
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	There is 2 actuly! But i only have one power connecter for it and the ribbon dont reach giggles Im not having a rad at the top Sam, but here is a photo to help you plan your build, the vernier is set to 50mm. As you can see you have a few MM spare. Edit Make that 50.6mm hehe Last edited by Skorchio; 3rd Nov 2009 at 07:58.

17th Oct 2009, 22:51	#11
samkiller42 Considered for President!! Moi?? Join Date: Apr 2006 Location: Portchester Posts: 5,522	Thanks, i shall be keeping an eye on this one, inspiration can only be a good thing no? Sam __________________ The Laptop: Dell Vostro 3450, SB i3 2350m, 8GB DDR3, 256GB 830 SSD, Intel 6235 Wifi N/BT 4.0, Dell 5550 3G/GPS The Server: Phenom 2 x6, 8GB DDR3, 3TB Seagate, 2TB WD Green, 2*1TB Samsung F1

17th Oct 2009, 22:55	#12
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	Of course all i hope to have it going allong at a good pace, there are many mods that will take time tho

18th Oct 2009, 12:33	#13
subset7 Spanking the Monkey Join Date: Aug 2008 Location: Liverpool UK Posts: 174	Nice start Scorch,good luck with the rest of the build __________________ Project:PURE

18th Oct 2009, 12:53	#14
bagman I Mod, Therefore I Own Join Date: Apr 2009 Location: Swedish but in Loughborough Posts: 3,412	can't wait to see more of this build

18th Oct 2009, 13:02	#15
Djayness ASUS Join Date: May 2008 Posts: 971	Epic drawing skills I thought your watercooling looked like fallopian tubes (or at least what id like to think theyd look like ) This project needs a name Awesome work mate, ill subscribe and stick around for it! Cheers! __________________ My Youtube channel ASUS ROG YouTube (That I present)

18th Oct 2009, 13:42	#16
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	Thanks Sub, nice to see so many faces i know! Dj, thanks, there are more drawings comming on monday so watch this space Somone said "Blue ray" which i quite like, but it wont even have a blue ray player! With the 3 resses it kinda looks like a production factory or lab. Making Blue? Blue Refinary? Hmm.

19th Oct 2009, 09:37	#17
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	As its going to have dark blue , blue and clear, and there will be a “clean” white and illuminated floor i think i want to go along the lines of cleaning the blue out of the water. Cleansing Purifying blue Purify <<<<<<<<<<, oww i really like this? What you guys think to Purify?

19th Oct 2009, 10:05	#18
bagman I Mod, Therefore I Own Join Date: Apr 2009 Location: Swedish but in Loughborough Posts: 3,412	it's monday i want pictures now!!

19th Oct 2009, 12:33	#19
Skorchio Supermodder Join Date: Oct 2009 Location: UK Posts: 336	Ok Ok Bagman, here you go I just got off lunch and finished the Rad+HDD drawing. This shows how i will be mounting the HDD's and rad in the drive bays. I will be using 4mm alli with m2 screws. Hdd's Big sheet along the bottom of the two chopped down drive bay mouts to make a clean look. Then two rectangles perpendicular to this base for the mounting, depending on rigidity I may extend them bits and put a brace on the top. Rad Very simple, 2 strips of 4mm alli with holes in bolted to the rad, simples. Another update I bought a pump and res yesterday so I should get the tomorrow. I can then see how room I will have drive bay wise so I can cut them and get the above drawing built. Last edited by Skorchio; 3rd Nov 2009 at 07:59.

19th Oct 2009, 18:17	#20
Bullitdodger If it ain't broke....Tweak it. Join Date: Oct 2005 Location: Copenhagen, Denmark Posts: 317	I want a TJ-07.... __________________ Argueing on the internet, is like running in the special olympics. Even if you win, you're still retarded....

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts