10th Apr 2011, 17:56
|
#1 |
|
What's a Dremel?
Join Date: Mar 2011
Location: Portugal
Posts: 12
 |
[Worklog] Lian's Spirit
 Hi folks, I'm to present you my new project  This will be a long term project, without any prediction of when is ready. I'm gonna start to adventure into a new world of modding where all work will be done by me. I will use machinery that had never tried before, so i have still to practice to become the results that i pretend. The project consist in a full interior reconstruction and paint job of the chassis Didn't have nothing programmed for the hardware, only the WC system is more or less defined. I pretend to mount two 240mm radiators on the bottom and maybe one 120mm rad next to the board. I intend to create a system ready for dual loop, but that are still things I have study before. Leaving the conversation and passing to the photos:   My workshop where all the work will done   However got a lot of work to do, first thing to start will be the "middle" tray divides Psu / radiators of the rest.   Acrylics i will use and Tray + tray holders already cut out. Basically most of the interior will be white acrylic with some parts in black too  Already in test and measurement    Still under development, Hdd cage for 3 discs with Hot-Swap system     two new toys, sander and drill  M3 screws, countersunk and button head Rivet countersunk and dome head  HDD cage already in final state   Holders for the Hot Swap connectors  Middle tray holders already finished  The mess after some work, acrylic everywhere   Middle tray already fixed and one of the rad supports done, just missing three more     3 router bits, radius round over and straight cut   Acrylic with 1 cm of thickness just for a quick test   After a couple of minutes sanding with a 1200 grit. Just need some polishing and pass a bit with a blowtorch to make it shiny again  tray guide, made for easy remove of the board tray like lian li style but more beautiful....  Guide already fixed and tray on his place   Brackets for the radiators finished. Made in order to give more stability to the middle tray, just missing to fix the brackets on the bottom and ready to mount the rads   New part that divide the mobo from the hdd / 3.5 drive bays    Comb for 24 pins cable, to make a better cable management and give a more cleaner look as well       Some led's to make it shine    And one more comb for 8 pins connector   kind of a gutter that stays between the rads to give a better cable management        Middle tray finish   I hope you guys enjoy my work, ive got still a lot to do to have this build finish...  Best regards Bumbeldi |
|
|
|
10th Apr 2011, 18:04
|
#2 |
|
Making You Feel Old Since 2010
Join Date: Sep 2010
Location: Wigan
Posts: 9,881
 |
WOW, I love the piece for the 24 pin, I'm very impressed, can't wait for more!
__________________
Project Logs: Refraction - Steampunk Flash Drive
Silverstone PS07 - Asus M4A88TD M EVO - AMD X6 1055T - Asus 7790 Cu 1GB - 8GB Corsair Vengeance - Xonar DG - M4 128GB - Frio - Antec 650W - Dell U2312HM X2 - Poker MX Red - Sennheiser HD 598 - IcyBox3219 (WD Red 1TB X2) "The fear in my eyes when my lass almost opened contacts, and with the name Alessandro, yours comes up very near the top." - Blazza181 |
|
|
|
|
10th Apr 2011, 19:06
|
#3 | |
|
What's a Dremel?
Join Date: Mar 2011
Location: Portugal
Posts: 12
|
Quote:
|
|
|
|
|
|
10th Apr 2011, 19:18
|
#4 |
|
Two steps forward, one step back
Join Date: May 2009
Location: Bristol
Posts: 468
|
What a great first post, love the attention to detail and superb plexi work. Can't wait for more
__________________
Corsair Graphite 600T White :: Intel Core i5 760 @ 3.4GHz :: Titan Fenrir :: 8gb Corsair DDR3 1600MHz :: Asus P7P55D-E :: Corsair Force Series 3 120GB :: Gigabyte HD 6850 1GB :: Corsair HX520
|
|
|
|
|
10th Apr 2011, 19:18
|
#5 |
|
Addicted to modding.
Join Date: Mar 2011
Location: Kings Lynn, Norfolk
Posts: 498
|
Total quality...looks so pro. keeping glued to this one..
|
|
|
|
|
10th Apr 2011, 21:16
|
#6 |
|
Multimodder
Join Date: Mar 2011
Posts: 87
|
This looks great, if only I had the same tools I'd give it a shot too. Sub'd
-Jv |
|
|
|
|
10th Apr 2011, 22:51
|
#7 |
|
Supermodder
Join Date: May 2010
Location: Brazil
Posts: 362
|
Really excelente project!
Keep going! 
|
|
|
|
|
11th Apr 2011, 11:52
|
#8 |
|
Moderate Modder
Join Date: Jul 2008
Location: North West England
Posts: 1,565
|
this is looking special
__________________
Watering down PC's since 2009.... |
|
|
|
|
11th Apr 2011, 18:57
|
#9 |
|
Leader of the casemod watchers :D
Join Date: Jan 2010
Location: Netherlands
Posts: 49
|
OMG OMG. Nice! really nice
|
|
|
|
|
12th Apr 2011, 17:16
|
#10 |
|
Minimodder
Join Date: Jul 2009
Posts: 40
|
Very nice work!! Cant wait to see more.
|
|
|
|
|
12th Apr 2011, 17:46
|
#11 |
|
Ultimate Modder
Join Date: Mar 2009
Location: Cyprus
Posts: 2,633
|
Really nice work my friend, I see a kick ass mod coming our way!!!
|
|
|
|
|
12th Apr 2011, 19:42
|
#12 |
|
Supermodder
Join Date: Jun 2008
Location: Hungary
Posts: 257
|
Nice work so far, I'll watch this
__________________
Current projects: Tydirium is on the way! Previous mods: | [/url]|Sandcrawler Mod| |Illuminated Mind| [url="http://forums.bit-tech.net/showthread.php?t=246505""]Graphite 5 Follow me on Facebook |
|
|
|
|
12th Apr 2011, 20:14
|
#13 |
|
What's a Dremel?
Join Date: Mar 2011
Location: Portugal
Posts: 12
|
Thanks, great to see that you guys are enjoying my work...
|
|
|
|
|
13th Apr 2011, 14:01
|
#14 |
|
Bokehlicious!
Join Date: Nov 2010
Location: Ipswich, UK
Posts: 691
|
Very nice, I'm watching
__________________
Check out my build: the Shuttle.
Q8300. 8gb XMS2. ATI 4650. Thermalright AXP-140. Samsung SpinPoint 1TB. 1U 300w PSU. Shuttle Case. MDPC-X Sleeving. |
|
|
|
|
13th Apr 2011, 14:53
|
#15 |
|
Me ^ | My Post ->
Join Date: Aug 2004
Location: @ UKay
Posts: 2,468
|
nice project
any idea where I could get one of these in the UK?
__________________
Cheers, Cool_Dude. ...Talk is cheap. |
|
|
|
|
13th Apr 2011, 15:02
|
#16 |
|
Minimodder
Join Date: Apr 2011
Location: EuroDisney :D
Posts: 34
|
ouaouh !!!
great work here. nice ideas for cable management. a plexiglas artist for sure |
|
|
|
|
13th Apr 2011, 19:06
|
#17 |
|
Pretty Good Kid
Join Date: Feb 2010
Location: Cleveland, Ohio
Posts: 62
|
I'm honestly blown away by the quality of your work so far, it is like Atilla but with acrylic. I love all the custom parts, even for things that won't be seen like the cable channel.
I will be following this log with great interest! Have Fun, SPNKR
__________________
Know the truth, and the truth will set you free. | Antec 900 | EVGA X58 SLI LE | i7-920 | Corsair H50 | 6GB Corsair DDR3-1600 |
| XFX Radeon HD 5770 | WD Caviar Blue 300GB | |
|
|
|
|
13th Apr 2011, 21:19
|
#18 |
|
absit iniuria verbis
Join Date: Apr 2009
Location: Mostly Harmless
Posts: 268
|
sub'd and +1
Nano |
|
|
|
|
14th Apr 2011, 10:19
|
#19 | |
|
What's a Dremel?
Join Date: Mar 2011
Location: Portugal
Posts: 12
|
Thanks guys, i appreciate...
Quote:
|
|
|
|
|
|
14th Apr 2011, 11:06
|
#20 | |
|
You've got red on you...
Join Date: Jun 2004
Location: Lockerbie
Posts: 492
|
Quote:
Just look for a router table - screwfix have got some e.g. http://www.screwfix.com/p/ryobi-art3...er-table/24007
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| View Mode | |
|
|
All times are GMT. The time now is 10:39.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
