bit-tech.net

BigBig5 · 5th Sep 2010, 04:58

The real The Blue Green Machine mod. I had a old case mod that had the same name, unfinished because of window cracking and case too small. Well a fresh start. In the pic it has a old PSU thats going to be swiched out with a Siverstone DA 650 with Single Braided Sleveing. Here is the link to the hardware specs http://www.mypcmod.com/viewpc.php?id=228

This is my main computer I use and I go to college, so its not going to get done fast.

Before pic:

BigBig5 · 6th Sep 2010, 02:04

UPDTAE:
I have most of the sleeving done. I use MDPc X sleeving. Colors: Gray, Aquamarine-blue, and Green. Still need to do 4-pin molex.
Here are some pics:
Siverstone DA 650

24-pin ATX: The rest of the wires will be blue.

SATA

BigBig5 · 10th Oct 2010, 01:05

Here is some updated pics. I still have to get 2 140mm fans and 1 120mm fan. Maybe some led lights.

Mattmc91 · 10th Oct 2010, 11:26

Did you even shrink your heatshrink? it looks so loose on the wires.

It's also 2x as long as it's meant to be.

looks a lot cleaner at the least.

BigBig5 · 10th Oct 2010, 16:56

I did the day I finished the sleeving.

BigBig5 · 11th Oct 2010, 16:40

BUMP

p0Pe · 11th Oct 2010, 16:45

You dont "bump" a worklog... Your last post was yesterday.

Put you camera on something static, put the iso down to 100.
Your heatshrink on the cables looks to be 3 times as long as needed.
Nice colorscheme otherwise

BigBig5 · 24th Oct 2010, 04:57

Updated: I zip tied the 24-pin wires to the motherboard tray and covered it with a green cable tie.

BigBig5 · 24th Oct 2010, 05:09

I'm going to get 2 140mm green led fans for the top and 1 blue led fan for the side. The side fan now will be moved to the front. Thinking of painting the front mesh green and bay covers blue, green or alternating. What do you all think would look better? The PCI slot covers will be alternating blue and green. Might get some wire grills for the back and top fans and paint them blue, should I cut them out for that?

BigBig5 · 30th Aug 2011, 01:25

I am not going to do much of any thing else on this because its being my main computer for school and gaming. I'm in the planning of building a small HTPC/Gaming computer mod.

5th Sep 2010, 04:58	#1
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	NZXT M59 [aka The Blue Green Machine] Updated 10/24 The real The Blue Green Machine mod. I had a old case mod that had the same name, unfinished because of window cracking and case too small. Well a fresh start. In the pic it has a old PSU thats going to be swiched out with a Siverstone DA 650 with Single Braided Sleveing. Here is the link to the hardware specs http://www.mypcmod.com/viewpc.php?id=228 This is my main computer I use and I go to college, so its not going to get done fast. Before pic: Last edited by BigBig5; 24th Oct 2010 at 05:25.

6th Sep 2010, 02:04	#2
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	UPDTAE: I have most of the sleeving done. I use MDPc X sleeving. Colors: Gray, Aquamarine-blue, and Green. Still need to do 4-pin molex. Here are some pics: Siverstone DA 650 24-pin ATX: The rest of the wires will be blue. SATA __________________ AMD MODS: The Blue Green Machine

10th Oct 2010, 01:05	#3
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	Here is some updated pics. I still have to get 2 140mm fans and 1 120mm fan. Maybe some led lights. __________________ AMD MODS: The Blue Green Machine Last edited by BigBig5; 10th Oct 2010 at 16:58.

10th Oct 2010, 16:56	#5
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	I did the day I finished the sleeving. __________________ AMD MODS: The Blue Green Machine Last edited by BigBig5; 11th Oct 2010 at 16:40.

11th Oct 2010, 16:40	#6
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	BUMP __________________ AMD MODS: The Blue Green Machine

bit-tech.net

Site Links

Our Other Sites

10th Oct 2010, 11:26	#4
Mattmc91 LOLS I TROL YOU Join Date: Oct 2009 Location: Portsmouth Posts: 1,350	Did you even shrink your heatshrink? it looks so loose on the wires. It's also 2x as long as it's meant to be. looks a lot cleaner at the least.

11th Oct 2010, 16:45	#7
p0Pe gief cake? Join Date: Nov 2007 Location: denmark! Posts: 1,207	You dont "bump" a worklog... Your last post was yesterday. Put you camera on something static, put the iso down to 100. Your heatshrink on the cables looks to be 3 times as long as needed. Nice colorscheme otherwise __________________ the work METO V.1 - METO V.2 - METO V.3 PC-Beto Project M8 [WIP]

24th Oct 2010, 04:57	#8
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	Updated: I zip tied the 24-pin wires to the motherboard tray and covered it with a green cable tie. __________________ AMD MODS: The Blue Green Machine Last edited by BigBig5; 24th Oct 2010 at 05:21.

24th Oct 2010, 05:09	#9
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	I'm going to get 2 140mm green led fans for the top and 1 blue led fan for the side. The side fan now will be moved to the front. Thinking of painting the front mesh green and bay covers blue, green or alternating. What do you all think would look better? The PCI slot covers will be alternating blue and green. Might get some wire grills for the back and top fans and paint them blue, should I cut them out for that? __________________ AMD MODS: The Blue Green Machine

30th Aug 2011, 01:25	#10
BigBig5 Single Braid Sleeving Join Date: Apr 2010 Location: Hillsborough, NC, USA Posts: 55	I am not going to do much of any thing else on this because its being my main computer for school and gaming. I'm in the planning of building a small HTPC/Gaming computer mod. __________________ AMD MODS: The Blue Green Machine Last edited by BigBig5; 14th Mar 2012 at 21:12.

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts