bit-tech.net

Go Back   bit-tech.net Forums > Modding > Project Logs
Reload this Page Scratch Build Project - The Next Level - Winner MOTY 2012 -
Register FAQ / Rules Calendar Search Today's Posts Mark Forums Read

Reply
Page 5 of 30 < 1234 5 67891015 > Last »
 
Thread Tools View Mode
Old 12th Feb 2012, 22:56   #81
xSoMBrAx
Supermodder
 
Join Date: May 2011
Posts: 334
xSoMBrAx has yet to learn the way of the DremelxSoMBrAx has yet to learn the way of the Dremel
This build looks more like a prototype for a final retail version than "just" a personal moded desktop, the manufacturing is that good...
__________________
Latest Project: « «[ Little Angel ]» » (FINISHED!)
Sponsors: *** Aquatuning | Atlas Informática | NZXT ***
*** ProSilentPC | Seasonic | IzarMicro | E22 ***

Follow me on Facebook!
xSoMBrAx is offline   Reply With Quote
Old 13th Feb 2012, 01:49   #82
jeckulz
Supermodder
 
jeckulz's Avatar
 
Join Date: Jan 2011
Location: Wigan
Posts: 420
jeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremel
Subbed out of pure jealousy of the tooling you have to hand.

Keep it up fella!
__________________
Intel i5 2500k @ 4.5Ghz / Dark Rock Adv. MSI Z68A-GD55
Asus Radeon HD6850 Direct CU @902Mhz 8gb (4x2) Corsair Vengance LP 1600Mhz
OCZ Vertex 4 128gb Seagate 320gb & Samsung 1tb
Coolermaster 600w Silent Pro Modded Lian Li PC-0700
jeckulz is offline   Reply With Quote
Old 13th Feb 2012, 02:13   #83
voigts
Hypermodder
 
voigts's Avatar
 
Join Date: Apr 2006
Location: Tennessee
Posts: 796
voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.voigts is a hoopy frood who really knows where their towel is.
no kidding. Any modder could lust after having that kind of a setup at your disposal. Makes any homemade attempts at metalworking look feeble at best. Very nice welding nonetheless.
__________________
Previous Project: Zenith Antique Radio Scratch Build
Current project: Project Quintessence
voigts is offline   Reply With Quote
Old 13th Feb 2012, 12:53   #84
Paslis
Supermodder
 
Paslis's Avatar
 
Join Date: Jun 2011
Location: Netherlands
Posts: 439
Paslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run Crysis
Quote:
Originally Posted by Waynio View Post
Oh it will look seriously nice that colour combo.
I hope it will.

Quote:
Originally Posted by KoSoVaR^ View Post
Awsome!
I think that alphacool has a lot of copper fittings, tube reservoars etc aswell check them out aswell, they have started to really use copper more and more on thier products now
Thanks mate i sure will look at them.

Quote:
Originally Posted by xSoMBrAx View Post
This build looks more like a prototype for a final retail version than "just" a personal moded desktop, the manufacturing is that good...
Thanks xSoMBrAx.

Quote:
Originally Posted by jeckulz View Post
Subbed out of pure jealousy of the tooling you have to hand.

Keep it up fella!
Thanks jeckulz.

Quote:
Originally Posted by voigts View Post
no kidding. Any modder could lust after having that kind of a setup at your disposal. Makes any homemade attempts at metalworking look feeble at best. Very nice welding nonetheless.
Thanks voigts.
Paslis is offline   Reply With Quote
Old 13th Feb 2012, 14:13   #85
wejjy
Hypermodder
 
wejjy's Avatar
 
Join Date: Aug 2010
Location: Droitwich Spa
Posts: 622
wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.wejjy is the Cheesecake. Relix smiles down upon them.
Also subbed but purely out of jealousy! I love my workshop, but yours makes it look like a garden shed so I have to watch. That added to the fact that this just looks awesome! I love the idea and the speed at which you work is just phenomenal!

Subb'd
__________________
Project in progress: Bitfenix Prodigy Stacker

Interior Des(k)ign | BitPac | Bitfenix Prodigy Stacker
Modding is addictive!!
wejjy is offline   Reply With Quote
Old 13th Feb 2012, 15:27   #86
Paslis
Supermodder
 
Paslis's Avatar
 
Join Date: Jun 2011
Location: Netherlands
Posts: 439
Paslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run Crysis
Thanks wejjy and its not my shop but the shop of my boss and yes im very lucky i can use it any time i want.After 22 years i still love to fabricate.
Paslis is offline   Reply With Quote
Old 13th Feb 2012, 15:44   #87
jeckulz
Supermodder
 
jeckulz's Avatar
 
Join Date: Jan 2011
Location: Wigan
Posts: 420
jeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremeljeckulz has yet to learn the way of the Dremel
Quote:
Originally Posted by Paslis View Post
Thanks wejjy and its not my shop but the shop of my boss and yes im very lucky i can use it any time i want.After 22 years i still love to fabricate.
After 22 years you still love your job...
Aluminium (not aloominum) filings in this mans veins!
__________________
Intel i5 2500k @ 4.5Ghz / Dark Rock Adv. MSI Z68A-GD55
Asus Radeon HD6850 Direct CU @902Mhz 8gb (4x2) Corsair Vengance LP 1600Mhz
OCZ Vertex 4 128gb Seagate 320gb & Samsung 1tb
Coolermaster 600w Silent Pro Modded Lian Li PC-0700
jeckulz is offline   Reply With Quote
Old 14th Feb 2012, 11:59   #88
Paslis
Supermodder
 
Paslis's Avatar
 
Join Date: Jun 2011
Location: Netherlands
Posts: 439
Paslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run Crysis
Let me say i love to design and fabricate. Aluminium in my veins hahahaha.
Paslis is offline   Reply With Quote
Old 14th Feb 2012, 12:14   #89
bugeye
Sleep Deprived
 
Join Date: Aug 2011
Location: London
Posts: 224
bugeye has yet to learn the way of the Dremelbugeye has yet to learn the way of the Dremelbugeye has yet to learn the way of the Dremel


I'd like one of these .... not because I'm going to water cool anything . I'd just like one , I'd take it everywhere with me

Stunning work
bugeye is offline   Reply With Quote
Old 14th Feb 2012, 12:42   #90
Paslis
Supermodder
 
Paslis's Avatar
 
Join Date: Jun 2011
Location: Netherlands
Posts: 439
Paslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run Crysis
Thanks bugeye and if you want i will make one for you do you need a chain also.
Paslis is offline   Reply With Quote
Old 14th Feb 2012, 13:30   #91
bugeye
Sleep Deprived
 
Join Date: Aug 2011
Location: London
Posts: 224
bugeye has yet to learn the way of the Dremelbugeye has yet to learn the way of the Dremelbugeye has yet to learn the way of the Dremel
No need for a chain ... I'd never let go of it
bugeye is offline   Reply With Quote
Old 14th Feb 2012, 18:07   #92
Cheapskate
↓ Don't trust that face!
 
Cheapskate's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 7,012
Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.Cheapskate is the Cheesecake. Relix smiles down upon them.
@Kenny - I thought that res looked familiar. That's it. I'm moving to The Netherlands.
Cheapskate is offline   Reply With Quote
Old 14th Feb 2012, 18:47   #93
Paslis
Supermodder
 
Paslis's Avatar
 
Join Date: Jun 2011
Location: Netherlands
Posts: 439
Paslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run Crysis
Quote:
Originally Posted by bugeye View Post
No need for a chain ... I'd never let go of it
Oke no chain then.

Quote:
Originally Posted by Cheapskate View Post
@Kenny - I thought that res looked familiar. That's it. I'm moving to The Netherlands.
If you want i build one for you that way you save yourself a trip to the Netherlands. To be honest Kenny only used 1 of the 2 i made so he must be hiding the second one somewhere.
Paslis is offline   Reply With Quote
Old 14th Feb 2012, 21:00   #94
k.3nny
Hypermodder
 
k.3nny's Avatar
 
Join Date: Jan 2010
Location: Netherlands
Posts: 830
k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.k.3nny is a hoopy frood who really knows where their towel is.
Quote:
Originally Posted by Paslis View Post
Oke no chain then.



If you want i build one for you that way you save yourself a trip to the Netherlands. To be honest Kenny only used 1 of the 2 i made so he must be hiding the second one somewhere.
Oh snap

i got both in eye-sight
k.3nny is offline   Reply With Quote
Old 17th Feb 2012, 13:25   #95
Paslis
Supermodder
 
Paslis's Avatar
 
Join Date: Jun 2011
Location: Netherlands
Posts: 439
Paslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run Crysis
Nice one K.3nny.
Paslis is offline   Reply With Quote
Old 19th Feb 2012, 18:21   #96
Paslis
Supermodder
 
Paslis's Avatar
 
Join Date: Jun 2011
Location: Netherlands
Posts: 439
Paslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run CrysisPaslis can run Crysis
Update 5. 19 Feb 2012

This weekend i made some progress again.This week i received the security part for the desk.
Its a hose full of little switches and if 1 switch is pressed then the columns stop moving and go up for about 50mm.

The package.







Linak also gave me a special connector to connect the jackplug.I already test it and i will make a short movie soon.



Thank hpr and specially marc.



Also linak called when they seen the update with the lifting column for the screens and told me that i can mount the column up side down because im using it for lcd panels.So i made a bracket for it and mount it on the frame.







Cheapskate asked me why use stock gear and not making a custom stainless steel reservoir so i came up with a new reservoir design.

First i made a few covers on the lathe.Then i drilled and tapped them with g1/4.



Then i saw 4 pieces of 60mm stainless steel pipe.





Then i spotwelded the covers on the pipes and finisht welding them.





Some sanding.







Then i spotwelded the pipes together and finsht welding them.





Then i welded the feet and did some polishing and this is how they look.Custom 90 degree stainless steel reservoirs.











More to come.
Paslis is offline   Reply With Quote
Old 19th Feb 2012, 18:43   #97
KoSoVaR^
Professional Sleever & Modder
 
KoSoVaR^'s Avatar
 
Join Date: Dec 2010
Location: Sweden
Posts: 927
KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.KoSoVaR^ is a hoopy frood who really knows where their towel is.
You got magic solderskills!
KoSoVaR^ is offline   Reply With Quote
Old 19th Feb 2012, 18:49   #98
bulldogjeff
The modding head is firmly back on.
 
bulldogjeff's Avatar
 
Join Date: Mar 2010
Location: Gliding through cyber space
Posts: 7,322
bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.bulldogjeff is the Cheesecake. Relix smiles down upon them.
Shiiiiiiiit !!!! Thats some tasty handiwork wow wicked welding skills..
bulldogjeff is offline   Reply With Quote
Old 19th Feb 2012, 18:52   #99
craig - toyoracer
Supermodder
 
craig - toyoracer's Avatar
 
Join Date: Mar 2011
Location: Kootenays,BC.Canada
Posts: 364
craig - toyoracer has yet to learn the way of the Dremelcraig - toyoracer has yet to learn the way of the Dremelcraig - toyoracer has yet to learn the way of the Dremelcraig - toyoracer has yet to learn the way of the Dremelcraig - toyoracer has yet to learn the way of the Dremelcraig - toyoracer has yet to learn the way of the Dremel
The best part of all your builds is the little unique design elements that you come up with.
__________________
octTower
craig - toyoracer is offline   Reply With Quote
Old 19th Feb 2012, 19:18   #100
peteski
long live the pc
 
peteski's Avatar
 
Join Date: Jun 2011
Location: chelmsford,uk
Posts: 384
peteski has yet to learn the way of the Dremel
truely amazing mate your skill gets me every time
__________________
i5 2500k, asrock z68 extreme 4, corsair 4x2gb 1600mhz,fractal define xl,
peteski is offline   Reply With Quote
Reply
Page 5 of 30 < 1234 5 67891015 > Last »

« Previous Thread | Next Thread »
Thread Tools
View Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 21:24.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.

bit-tech.net - Top