bit-tech.net

iD2 · 29th Mar 2012, 17:31

Hello, This is first time i'm post in this forums. Any comments , recommend are welcome.

Project description :: This case build for put CNC component and PC components together.

Why i need to put everything together?
- 1 year ago i design and build my own CNC machine but the electronic components didn't have enclosure yet and after finished build machine my old PC was dead so need to brought new one, so i need to put it in same case together.

OK, for my CNC build log you can see it in my blog here "iD2CNC Newbie guide to build CNC with less tools , newbie experience to newbie" but first post will not have English, but for English detail can found it here "CNCZone"

PC Hardware components ::
- MB - Asus M5A78L-MLX
- CPU - AMD ATHLON II X2 250
- Ram - Kingston 2Gb x 2 DDR3 1066
- HD1 - OCZ Agility 60GB (Second hand)
- HD2 - Western Green SATAII 500GB (Second hand)
- VGA - HIS 6670 1GB DDR5 (Second hand)
- PSU - RaidMax RS530 530watt
- Monitor - Sharp 17" LCD (Second hand)
- CDROM - Asus (Second hand)

CNC Electronic components ::
- 3x Stepper motor driver JMC M542
- 3x Terminal Block
- 1x DB25 BreakOut Board
- 6x 8mm 12v Fan
- 1x Switching PSU 24v 15A
- 1x Switching PSU 12v 5A
- 1x Switching PSU 5v 5A
- 6x Fuse block
- 1x VFD Spindle Inverter
etc,.

Case dimension ::
- Case size 60 x 40 x20cm

Case material ::
- Frame use aluminium profile 20x20mm
- Acrylic 6mm

Case feature ::
- 3x input AC 220v
- CNC and PC component in case
- Not much huge case
- No additional led light , use only from PSU itself
etc,.

Sponsor ::
N/A

Notes ::
I'm not good in English , so if i make you confuse or i use wrong word or any mistake , please help me to make it right.

First time Scratch ::

this scratch was not complete , it not finish in detail and position of components

Second time scratch ::

In Color detail ::

Acrylic drill and tap position ::

Start cutting aluminium profile ::

Cutting acrylic for PC black side panel ::

Spray paint ::

Other acrylic components ::

CNC DB25 BreakOut Board mounting ::

Raikkok · 30th Mar 2012, 08:30

hi iD2

What is the surface work of your cnc?

How thickness is the acrylic do you use in the mod?

Thanks and good luck

Overminde · 30th Mar 2012, 09:23

Mate what can i say, o followed your CNC project by your blog and the only thing i can say is that your work is inspiring... Hope to see more from you soon.

iD2 · 30th Mar 2012, 09:39

Quote:

Originally Posted by Raikkok

hi iD2

What is the surface work of your cnc?

How thickness is the acrylic do you use in the mod?

Thanks and good luck

Did you mean table top of CNC? (if i miss understand please tell me)
My table top of CNC using aluminium profile and working area of my CNC machine 64cm x 55cm x 15cm (X,Y,Z axis).

For acrylic , i use 6mm because it fit to slot of aluminium profile.

Quote:

Originally Posted by Overminde

Mate what can i say, o followed your CNC project by your blog and the only thing i can say is that your work is inspiring... Hope to see more from you soon.

Thank you

iD2 · 30th Mar 2012, 09:46

Quote:

Originally Posted by Raikkok

hi iD2

What is the surface work of your cnc?

How thickness is the acrylic do you use in the mod?

Thanks and good luck

Did you mean table top of CNC?. ( if i miss understand please tell me)
- My table top of CNC using aluminium profile and working area of my machine 64 x 55 x 15 cm (X , Y , Z Axis)

Quote:

Originally Posted by Overminde

Mate what can i say, o followed your CNC project by your blog and the only thing i can say is that your work is inspiring... Hope to see more from you soon.

Thank you

jhanlon303 · 30th Mar 2012, 11:59

I watch

john

iD2 · 30th Mar 2012, 15:34

OK, This's my PC and CNC electronic components right now. All of this components will put it in together.

Mark_Skeldon · 30th Mar 2012, 15:45

Looking forward to this one

Furball Zen · 30th Mar 2012, 15:57

Me too.

RedManc · 30th Mar 2012, 16:24

I don't understand a lot of what I just saw only that its looking good and im interested.

Keep this log going!

kinghong1970 · 30th Mar 2012, 16:40

Quote:

Originally Posted by Raikkok

hi iD2

What is the surface work of your cnc?

How thickness is the acrylic do you use in the mod?

Thanks and good luck

the surface looks like it's either 1020 or 1530 aluminum extrusions bolted down against the cross members of the cnc router machine.

iD2
nice to see you here too!

been looking at your logs at cnczone... very nice build indeed.

building a CRP2448 myself.

perhaps later, you can give me some pointers on spindles...

iD2 · 30th Mar 2012, 18:08

Hello, everyone for anyone i reply you late , i'm apologize for that because this my first thread and first post here so my post still less than 10 and it will not display until moderator approve my post first.

Cheapskate · 31st Mar 2012, 03:08

Nice rig. -Both the mill and the future control box.

jhanlon303 · 31st Mar 2012, 04:45

Quote:

Originally Posted by Cheapskate

Nice rig. -Both the mill and the future control box.

Bought time you noticed CNC and showed up Cheaps. This is NICE,

john

iD2 · 31st Mar 2012, 07:55

Quote:

Originally Posted by Mark_Skeldon

Looking forward to this one

Quote:

Originally Posted by Furball Zen

Me too.

Quote:

Originally Posted by RedManc

I don't understand a lot of what I just saw only that its looking good and im interested.

Keep this log going!

Quote:

Originally Posted by Cheapskate

Nice rig. -Both the mill and the future control box.

Quote:

Originally Posted by jhanlon303

Bought time you noticed CNC and showed up Cheaps. This is NICE,

john

Thank you

iD2 · 31st Mar 2012, 08:00

Quote:

Originally Posted by kinghong1970

the surface looks like it's either 1020 or 1530 aluminum extrusions bolted down against the cross members of the cnc router machine.

iD2
nice to see you here too!

been looking at your logs at cnczone... very nice build indeed.

building a CRP2448 myself.

perhaps later, you can give me some pointers on spindles...

Thank you , if i can help i'll do.

Editor22 · 31st Mar 2012, 10:56

This is AWESOME! Watching closely

kicklOp · 31st Mar 2012, 12:15

Nice to see my first SU model used in this thread... It's the SSD... Did you download it from http://scc.jezmckean.com ?

Anyway - awesome project... Building the CNC also...

iD2 · 31st Mar 2012, 19:32

Quote:

Originally Posted by kicklOp

Nice to see my first SU model used in this thread... It's the SSD... Did you download it from http://scc.jezmckean.com ?

Anyway - awesome project... Building the CNC also...

For model i download it from there and other component like CNC part and Asus motherboard i just drawing but some components i download from there too.

Thank you.

iD2 · 31st Mar 2012, 20:46

Today i went to shopping and some part just finish but not much thing i can do, a little update.

Shopping part and components ::

Then i just resolve my hole of PSU on right top , it not fit when test it need 1mm left , so i need to fix it and just finish design my PC card slot cover.

Redesign and fix some cosmetic issued ::

And just do some aluminium PC card mounting it not finish yet , still need to measure position of card and then drill and tap.

Aluminium PC Card mounting ::

And just finish spray paint acrylic custom fan grill , this fan grill i already finish about 2 week ago. This fan grill use for 80mm fan.

Fan grill 80x160mm ::

And other foot of fan grill to mount with bottom acrylic case.

Other components ::

This's aluminium for SSD mounting and Switching PSU mounting , it need to spray paint but didn't do it yet.
Aluminium for SSD mounting and Switching PSU mounting ::

Everything update it will update on my blog too iD2

29th Mar 2012, 17:31	#1
iD2 Minimodder Join Date: Mar 2012 Posts: 34	"CNPC" - Cheap PC and CNC components all in one case Hello, This is first time i'm post in this forums. Any comments , recommend are welcome. Project description :: This case build for put CNC component and PC components together. Why i need to put everything together? - 1 year ago i design and build my own CNC machine but the electronic components didn't have enclosure yet and after finished build machine my old PC was dead so need to brought new one, so i need to put it in same case together. OK, for my CNC build log you can see it in my blog here "iD2CNC Newbie guide to build CNC with less tools , newbie experience to newbie" but first post will not have English, but for English detail can found it here "CNCZone" PC Hardware components :: - MB - Asus M5A78L-MLX - CPU - AMD ATHLON II X2 250 - Ram - Kingston 2Gb x 2 DDR3 1066 - HD1 - OCZ Agility 60GB (Second hand) - HD2 - Western Green SATAII 500GB (Second hand) - VGA - HIS 6670 1GB DDR5 (Second hand) - PSU - RaidMax RS530 530watt - Monitor - Sharp 17" LCD (Second hand) - CDROM - Asus (Second hand) CNC Electronic components :: - 3x Stepper motor driver JMC M542 - 3x Terminal Block - 1x DB25 BreakOut Board - 6x 8mm 12v Fan - 1x Switching PSU 24v 15A - 1x Switching PSU 12v 5A - 1x Switching PSU 5v 5A - 6x Fuse block - 1x VFD Spindle Inverter etc,. Case dimension :: - Case size 60 x 40 x20cm Case material :: - Frame use aluminium profile 20x20mm - Acrylic 6mm Case feature :: - 3x input AC 220v - CNC and PC component in case - Not much huge case - No additional led light , use only from PSU itself etc,. Sponsor :: N/A Notes :: I'm not good in English , so if i make you confuse or i use wrong word or any mistake , please help me to make it right. First time Scratch :: this scratch was not complete , it not finish in detail and position of components Second time scratch :: In Color detail :: Acrylic drill and tap position :: Start cutting aluminium profile :: Cutting acrylic for PC black side panel :: Spray paint :: Other acrylic components :: CNC DB25 BreakOut Board mounting ::

30th Mar 2012, 08:30	#2
Raikkok Multimodder Join Date: Nov 2009 Posts: 88	hi iD2 What is the surface work of your cnc? How thickness is the acrylic do you use in the mod? Thanks and good luck __________________ "Raikkenstein Mod" http://forums.bit-tech.net/showthread.php?t=215645 MOTM January 2012 Winner

30th Mar 2012, 11:59	#6
jhanlon303 The Keeper of History Join Date: Sep 2006 Location: Box under a Bridge, Iowa Posts: 9,264	I watch john __________________ My deepest gratitude to this community.

30th Mar 2012, 15:45	#8
Mark_Skeldon Multimodder Join Date: Feb 2012 Location: North East UK Posts: 125	Looking forward to this one __________________ i7 2600k @4.42GHz, \| Asus Maximus IV Gene-z \| 8GB G.Skill Ripjaws CL9 \| GTX 570 @ 803/2002 \| 128GB Crucial M4 SSD \| Coolermaster RP Pro 1000w \| Lian Li PC70 \| Onkyo SR608 amp \| Mordaunt Short components \|

30th Mar 2012, 15:57	#9
Furball Zen Shut up and Mod Join Date: Jan 2012 Location: Northern, KY Posts: 526	Me too. __________________ Life. Liberty. The pursuit of those who oppose it. Guides: Modular PSU ~ FC foam removal Mods: Blue on Black ~ DVD-ROM Worklog: Acronymus ~ Carbide @furballzen

bit-tech.net

Site Links

Our Other Sites

30th Mar 2012, 09:23	#3
Overminde Multimodder Join Date: Sep 2011 Location: Portugal Posts: 70	Mate what can i say, o followed your CNC project by your blog and the only thing i can say is that your work is inspiring... Hope to see more from you soon.

30th Mar 2012, 15:34	#7
iD2 Minimodder Join Date: Mar 2012 Posts: 34	OK, This's my PC and CNC electronic components right now. All of this components will put it in together.

30th Mar 2012, 16:24	#10
RedManc Supermodder Join Date: Jul 2011 Location: Manchester, UK Posts: 338	I don't understand a lot of what I just saw only that its looking good and im interested. Keep this log going! __________________ FOX

30th Mar 2012, 18:08	#12
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Hello, everyone for anyone i reply you late , i'm apologize for that because this my first thread and first post here so my post still less than 10 and it will not display until moderator approve my post first.

31st Mar 2012, 03:08	#13
Cheapskate ↓ Don't trust that face! Join Date: May 2007 Location: Texas Posts: 6,983	Nice rig. -Both the mill and the future control box. __________________ BlooBalls·Hypnotoad·Plank·Reservoir-Things·AluBox Chopping·C7Waterblocks·GlassGreen Powered by: Danger Den·Hardware Labs·Noctua

31st Mar 2012, 10:56	#17
Editor22 E22.BIZ Join Date: Jan 2009 Location: Bristol <UK> Posts: 1,623	This is AWESOME! Watching closely __________________ Store: E22 Social: Youtube \| Facebook Projects: Evolution \| K2 MK1

31st Mar 2012, 12:15	#18
kicklOp What's a Dremel? Join Date: Dec 2011 Location: Ivanić Grad, Croatia Posts: 11	Nice to see my first SU model used in this thread... It's the SSD... Did you download it from http://scc.jezmckean.com ? Anyway - awesome project... Building the CNC also...

31st Mar 2012, 20:46	#20
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Today i went to shopping and some part just finish but not much thing i can do, a little update. Shopping part and components :: Then i just resolve my hole of PSU on right top , it not fit when test it need 1mm left , so i need to fix it and just finish design my PC card slot cover. Redesign and fix some cosmetic issued :: And just do some aluminium PC card mounting it not finish yet , still need to measure position of card and then drill and tap. Aluminium PC Card mounting :: And just finish spray paint acrylic custom fan grill , this fan grill i already finish about 2 week ago. This fan grill use for 80mm fan. Fan grill 80x160mm :: And other foot of fan grill to mount with bottom acrylic case. Other components :: This's aluminium for SSD mounting and Switching PSU mounting , it need to spray paint but didn't do it yet. Aluminium for SSD mounting and Switching PSU mounting :: Everything update it will update on my blog too iD2

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts