bit-tech.net

iD2 · 20th Apr 2012, 19:36

Thank you

iD2 · 20th Apr 2012, 19:48

Just assembly PC and have some problem with 4pin wire to connect motherboard , it too short and i need to extend it about 20- 30cm.

After finish extend 4pin wire , than test open PC to make sure it still work.

Put CNC Component to case

Left panel

iD2 · 21st Apr 2012, 19:29

OK, Start to wiring and put some stuff to case.

Attila · 22nd Apr 2012, 10:32

Nice work mate, I read your worklog on CNC zone. Fantastic work!

I can't believe you have built that thing in your bedroom. Awesome work, awesome machine.

dream1 · 22nd Apr 2012, 12:16

There are some times, if you really want something. So it does not realy matter for him/her they just do it. And when its redy, looks absolutly sunning. Even if it is made in the bedroom.
So what ever you are doing dont give up.
I realy like your cnc.

iD2 · 22nd Apr 2012, 18:53

Quote:

Originally Posted by Attila

Nice work mate, I read your worklog on CNC zone. Fantastic work!

I can't believe you have built that thing in your bedroom. Awesome work, awesome machine.

Thank you

, Building CNC in bedroom there were a lot of problem but big problem was noise when drilling but everything was done

. Now i concern if one day i need to move out from this condominium that mean i need to disassembly my CNC

it'll big job too.

Quote:

Originally Posted by dream1

There are some times, if you really want something. So it does not realy matter for him/her they just do it. And when its redy, looks absolutly sunning. Even if it is made in the bedroom.
So what ever you are doing dont give up.
I realy like your cnc.

Thank you

(sorry for my English , if any words was not correct please tell me)

iD2 · 22nd Apr 2012, 19:07

Still working with wiring everything together

80% Finish wiring

My case vs Standard case

Next job

This my next job to use this resistor to reduce 12v to 8v , to make fan quiet. Actually i need to use PC Fan Control it can adjust voltage but it expensive so i decide to invest with this resistor it very cheap.

iD2 · 13th May 2012, 16:02

Just back to work !!! Sorry for nothing update for long time , my routine work very busy . I don't have much time to work so this a little update and need to finish my case soon.

Case Handle

will be back soon....

bulldogjeff · 13th May 2012, 18:24

Now everything about this project is just seriously cool !

Drysofar · 13th May 2012, 20:43

If you want to run the fans slower but not at 5V you can skip the big resistors and just connect between the +5V live and the +12V line of your pc PSU this gives you 7V for the fan.

Drysofar · 13th May 2012, 20:46

As Sulu once shouted, Shields !!!.

You may also want to consider a solid or mesh metal cover for the PC motherboard as the CNC equipment can be very electrically noisy.

iD2 · 15th May 2012, 04:10

Quote:

Originally Posted by bulldogjeff

Now everything about this project is just seriously cool !

Thank you

Quote:

Originally Posted by Drysofar

If you want to run the fans slower but not at 5V you can skip the big resistors and just connect between the +5V live and the +12V line of your pc PSU this gives you 7V for the fan.

I never know that ,i'll use volt meter to test it if it work it will be good option to avoid big resistors. Thank you.

Quote:

Originally Posted by Drysofar

As Sulu once shouted, Shields !!!.

You may also want to consider a solid or mesh metal cover for the PC motherboard as the CNC equipment can be very electrically noisy.

thank you for your advice ,i'll design cover plate for my motherboard by using acrylic ,it look like asus sabertooth but i'll do it after everything finish.

Noob? · 15th May 2012, 09:11

Your attention to detail is astonishing as is the craftsmanship!

Top stuff, await your next update!

Thanks.

iD2 · 11th Jun 2012, 16:18

Hello, Long time nothing update because i need to work out of my office and my PC was dead stil waiting for RMA but can't wait anymore , so i decide to sell my pc component and bought new one.

New Spec ::
CPU --> AMD A6-3670K
Motherboard --> ECS A75F-M2
Ram --> Old Ram (2x Kingston bus 1333)
PSU --> (This part was dead , still waiting form RMA) , New RaidMax 730Watt

OK, Just back to work not much update but need to update my new PC and something i already done.

Foot base

Custom chip heatsink

iD2 · 17th Jul 2012, 09:48

Long time nothing update on this forums , Now big update. Let's see.

Foot base

Led light

Side Panel

Put spindle inverter to case

Side panel when connect wire component

Font right panel

dream1 · 17th Jul 2012, 10:26

This looks very simpel but jet very cool

. The wiering shold be littel better but i understand if there is any problem u wanna acsess fast but sill i lke it very much

iD2 · 17th Jul 2012, 10:42

Quote:

Originally Posted by dream1

This looks very simpel but jet very cool

. The wiering shold be littel better but i understand if there is any problem u wanna acsess fast but sill i lke it very much

Thank you, You right my wiring was not look clean and i need to make it looking better but now i need this case finish and work well and still have no idea how to do with a lot of wire.

Editor22 · 19th Jul 2012, 00:26

Awesome Job iD2! Makes my box look oh so dull now,,, :P

iD2 · 19th Jul 2012, 14:54

Just finish my Left font side panel , not much anything to describe just see picture.

Aluminum for hold acrylic

Put it in Case

Start cutting acrylic for font left panel

Finish cutting and put it in

iD2 · 19th Jul 2012, 14:55

Quote:

Originally Posted by Editor22

Awesome Job iD2! Makes my box look oh so dull now,,, :P

Thank you

20th Apr 2012, 19:48	#42
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Update, Assembly PC and extend 4pin PSU wire Just assembly PC and have some problem with 4pin wire to connect motherboard , it too short and i need to extend it about 20- 30cm. After finish extend 4pin wire , than test open PC to make sure it still work. Put CNC Component to case Left panel

22nd Apr 2012, 10:32	#44
Attila still thinking.... Join Date: Feb 2008 Location: Melbourne, Australia Posts: 1,176	Nice work mate, I read your worklog on CNC zone. Fantastic work! I can't believe you have built that thing in your bedroom. Awesome work, awesome machine. __________________ stillthinking

22nd Apr 2012, 19:07	#47
iD2 Minimodder Join Date: Mar 2012 Posts: 34	80% Finish Wiring Still working with wiring everything together 80% Finish wiring My case vs Standard case Next job This my next job to use this resistor to reduce 12v to 8v , to make fan quiet. Actually i need to use PC Fan Control it can adjust voltage but it expensive so i decide to invest with this resistor it very cheap.

13th May 2012, 18:24	#49
bulldogjeff The modding head is firmly back on. Join Date: Mar 2010 Location: Gliding through cyber space Posts: 7,322	Now everything about this project is just seriously cool ! __________________ BULLDOGS BOX..FINISHED HEAT BLAST...FINISHED Saturday Night Special..FINISHED... Rebirth Finished

13th May 2012, 20:43	#50
Drysofar Minimodder Join Date: Nov 2006 Location: Aberdeen Scotland Posts: 49	If you want to run the fans slower but not at 5V you can skip the big resistors and just connect between the +5V live and the +12V line of your pc PSU this gives you 7V for the fan. __________________ If you're not living on the edge you're taking up too much space..

bit-tech.net

Site Links

Our Other Sites

20th Apr 2012, 19:36	#41
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Thank you

21st Apr 2012, 19:29	#43
iD2 Minimodder Join Date: Mar 2012 Posts: 34	OK, Start to wiring and put some stuff to case.

22nd Apr 2012, 12:16	#45
dream1 Multimodder Join Date: Feb 2011 Location: Estonia Pärnu Posts: 206	There are some times, if you really want something. So it does not realy matter for him/her they just do it. And when its redy, looks absolutly sunning. Even if it is made in the bedroom. So what ever you are doing dont give up. I realy like your cnc.

13th May 2012, 16:02	#48
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Just back to work !!! Sorry for nothing update for long time , my routine work very busy . I don't have much time to work so this a little update and need to finish my case soon. Case Handle will be back soon....

13th May 2012, 20:46	#51
Drysofar Minimodder Join Date: Nov 2006 Location: Aberdeen Scotland Posts: 49	As Sulu once shouted, Shields !!!. You may also want to consider a solid or mesh metal cover for the PC motherboard as the CNC equipment can be very electrically noisy. __________________ If you're not living on the edge you're taking up too much space..

15th May 2012, 09:11	#53
Noob? Dremel? Join Date: Oct 2009 Posts: 1,727	Your attention to detail is astonishing as is the craftsmanship! Top stuff, await your next update! Thanks.

11th Jun 2012, 16:18	#54
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Hello, Long time nothing update because i need to work out of my office and my PC was dead stil waiting for RMA but can't wait anymore , so i decide to sell my pc component and bought new one. New Spec :: CPU --> AMD A6-3670K Motherboard --> ECS A75F-M2 Ram --> Old Ram (2x Kingston bus 1333) PSU --> (This part was dead , still waiting form RMA) , New RaidMax 730Watt OK, Just back to work not much update but need to update my new PC and something i already done. Foot base Custom chip heatsink __________________ My CNC and Case build :: https://idea2reallife.wordpress.com

17th Jul 2012, 09:48	#55
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Long time nothing update on this forums , Now big update. Let's see. Foot base Led light Side Panel Put spindle inverter to case Side panel when connect wire component Font right panel __________________ My CNC and Case build :: https://idea2reallife.wordpress.com

17th Jul 2012, 10:26	#56
dream1 Multimodder Join Date: Feb 2011 Location: Estonia Pärnu Posts: 206	This looks very simpel but jet very cool . The wiering shold be littel better but i understand if there is any problem u wanna acsess fast but sill i lke it very much

19th Jul 2012, 00:26	#58
Editor22 E22.BIZ Join Date: Jan 2009 Location: Bristol <UK> Posts: 1,621	Awesome Job iD2! Makes my box look oh so dull now,,, :P __________________ Store: E22 Social: Youtube \| Facebook Projects: Evolution \| K2 MK1

19th Jul 2012, 14:54	#59
iD2 Minimodder Join Date: Mar 2012 Posts: 34	Just finish my Left font side panel , not much anything to describe just see picture. Aluminum for hold acrylic Put it in Case Start cutting acrylic for font left panel Finish cutting and put it in __________________ My CNC and Case build :: https://idea2reallife.wordpress.com

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts