bit-tech.net

Go Back   bit-tech.net Forums > Modding > Project Logs

Reply
 
Thread Tools View Mode
Old 31st Mar 2012, 01:39   #1
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Inet 001 - Codename Mono - Final pictures!




This project is made on behalf of


*Awards are valid for Sweden only.

I give the word over to the people behind Inet;
"We here at Inet felt that we needed somehing special and unique to mark the start of something new, the acquisition of Indomo. A new era for computer modification and watercooling in Sweden.

We are proud to present our collaboration with Laine. For a couple of weeks you will get to follow as his creation comes to life. We gave Laine free hands to create and choose both what the computer should look like and what it should contain, both on hardware and cooling.
Here is part one av Mono - something beyond the ordinary."





Pre-release;

A hastely thrown together 'proof of concept' of watercooling in a Lian Li PC-Q11B. I wanted to know that it was possible to get your basic setup into the case before promising anything about something groundbreaking.



The things again hastely mounted in the case to get an estimate of what will fit, this time the real deal, a PC-Q11W.



Early planning and placement of both the PSU and the rear radiator.



The PC-Q11W in relation to a Streacom/Wesena F1C. The computer on top is called Nano and a Swedish gallery for it can be found [HERE].



Partslist;

Hardware:
CPU: Intel i7 2600K
GPU: EVGA GeForce GTX 670 2048MB
MB: ZOTAC Z68-ITX WiFi
RAM: Corsair 8GB (2x4096MB) CL9 1600Mhz VENGEANCE LP White
PSU: Silverstone ST45SF 450W
SSD: Corsair SSD Force GT 120GB x2
CSE: Lian Li PC-Q11W

Cooling:
PMP: EK DCP 2.2
RAD: Black ICE SR1 120mm
RAD: Black ICE SR1 140mm
RES: EK Multioption 100mm
GPU: EK-FC670 GTX
CPU: EK Supreme HF

And copious amounts of mixed Bitspower fittings (quite a bit over 50 I think).

Last edited by Laine; 2nd Jun 2014 at 11:59.
Laine is offline   Reply With Quote
Old 31st Mar 2012, 01:40   #2
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Part I


And I got the green light for release, here we go.



The build, already from the start, had some clear goals. A small footprint, light construction and of course, to be uncompromised.
These goals had to be reached without sacrificing performance.


Somewhat stripped front, but this is where I started the build.




Test fitting of the parts. The rear houses both a custom made adapter for SFX-PSUs and a somewhat trimmed down version of a Bitspower Mesh Radguard 120mm.



And for you who are curious regarding the studio and photos, here is a peak at the current one.



And the radiators for this build. I chose these because of the low FPI, giving the possibility to run the build as silently as possible.



The radiators are paired up with one Scythe Slip Stream 1200rpm 120mm each. From the left; Modded with a 140mm frame - stock - modded by removing the frame almost completely.



Not the best caption ever, but here you can see the fans lowered into the radiators, making them almost invisible.



And for storage, these beauties! A pair of Corsair Force GT 120GB.



Part II of this build will most probably be presented on Monday the upcomming week, with part III on Wednesday and part IIII on Friday.
Laine is offline   Reply With Quote
Old 31st Mar 2012, 03:01   #3
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by Furball Zen View Post
Interesting.
Thank you for your interest, it's a bit hard getting used to a new forum like this, especially since I haven't got the chance to prove my self on here yet. But all in due time, I hope.

Also I can't release too much information, or pictures right now since the 'big boys' at Inet have to keep up with me on their Facebook page and what not. But yeah, if you like the build or do in the future, feel free to drop a line to Inet to show that the "venture" is worth it, and that there is an interest for these kind of things.

In the mean time, I have some links to my older logs (in Swedish but with lots of pictures) in my signature below if it would be of interest for some.

Also found this here on Bit-Tech; http://forums.bit-tech.net/showthread.php?t=199574
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]

Last edited by Laine; 31st Mar 2012 at 03:08.
Laine is offline   Reply With Quote
Old 2nd Apr 2012, 22:07   #4
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by craig - toyoracer View Post
Nice to see this little water-cooled build.

Beautiful modding Laine.
Thank you, Craig my friend!

Quote:
Originally Posted by spigs_rex View Post
yep, another itx watercooled case to watch
Yay! Haha, another watercooled build to visit frequently, I hope?

Quote:
Originally Posted by Furball Zen View Post
I was gonna ask if you were Laine from XS and considering your sig, that would be you. Dont be offended when i say your photog skills are better than your modding lol.
Haha, yeah thats me! We'll have to put a stop to that being true then.

Quote:
Originally Posted by johnaton View Post
wow very nice, i am also modding the same case as u
It's a small world. These are great little cases though!


Part II

The radguard got a nice glossy white finish to match the rest of the exterior.


And the insides were coated in a satin black, along with the radiator now being a flat white.


Test mounting of the motherboard, after painting the cooler the same flat white as the radiator.


Those Vengeance-sticks are beautiful!


Here's a better view of the WLAN adapter. The bracket holding the antennas and the one holding the adapter itself were both finished of in black, same goes with the adapter. The cables got rerouted through the cooler.


Some more planning of the loop.




EK FC-GTX580DCII that I modded on to a KFA2 GTX570. Still some left to do until a perfect fit.



Next update, this Wednesday!
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 5th Apr 2012, 01:47   #5
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by Mr3D View Post
Whoa! Stunning build, keep up the good work mate!
Thanks, Daniel!

Quote:
Originally Posted by mansueto View Post
Very cool, I'm just curious as to how those fans perform, they look VERY small.
My requirements aren't very hard, just keep it somewhat cool but no records. Silence over temperatures in this case. And looks over silence.



Part III:I


Some time ago I painted the ports. Do NOT try this at home if you're not 100% sure that you are capable of doing it correctly. It will most likely kill your motherboard. I put down a hard 4 hours of prepwork and masking, and another 4 hours n the paintbooth. Do not spend any less and expect a good result.




Only the Sata-ports stand out, but in a quite charming way.


Stay tuned for part III:II, most likely on friday.
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 8th Apr 2012, 22:18   #6
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by Pranja View Post
This is really nice and neat. Good job!

Can't wait to see it finished.
Thank you, Pranja!

Quote:
Originally Posted by Parge View Post
Loving the look of this! Mini builds rock! Subbed!
Mini-ITX is a charming platform to start on, indeed!

Thanks, man!

Quote:
Originally Posted by kelmannen View Post
good to see you here too laine welcome to bit-tech forums!

Looking forward to a rather "artistic" buildlog
Thank you! I'll see what I can do.

Quote:
Originally Posted by y0gi View Post
Nicely done as always Laine. Keep it up bud!
Thanks, mate!



Part III:II

This time, sleeving!





MDPC-X; White - Titanium Grey - Color-X.





And a sneakpeak of what will be pumping through the system.


See you all on Monday!
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 10th Apr 2012, 01:31   #7
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by kicklOp View Post
Excellent!
Cheers!



Part IV:I


Placed the backplate on the GPU just to get a preview of what's to come, looks pretty.



Got caught in the moment.



And the real reason that we're here, removed the original +12V lane and GND from the PSU and made new ones directly from the PCB since the original was already split and split again, beyond saving. Sleeved the whole thing to match the rest.



Stay tuned for part IV:II, somewhere near you soon!
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 15th Apr 2012, 04:13   #8
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Part IV:II

Haha, it's pretty dead in here, eh?


Started working on a midplate/floor to separate the pump/res area from the rest of the case, making it look less cramped.


It took 3 tries and a lot of time, using only hand tools. The powertools just ripped it apart.





This might give you a better idea of what's to come.


As usual, don't be afraid to comment or criticize. Next part will be up soon I hope!
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 23rd Apr 2012, 04:40   #9
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by Mankz View Post
I do love a good WC'd SFF build
Who doesn't?

Quote:
Originally Posted by kelmannen View Post
like like =) is the holes placed so it'll go directly to the gpu with pipes and not hose? water cpu-(rad/pump-)floor-gpu-floor-(rad/pump-)cpu?
or am i way of? im following... =)
You got that right, but the order is res-pump-floor-gpu-floor-floor-120rad-cpu-140rad-floor-res.

Thanks!


Quote:
Originally Posted by Mr.Evil View Post
Though usually I don't like water cooled pc, your project is simply amazing !

I really like the black and white theme with a touch of red, then, I love ITX size ...
Thank you!


Part V

I'm back after a short break, let's continue!

Fitting of the midplate and the GPU together, the midplate is a bit off centre by the GPU's unsupported weight, making the crystal link a bit tilted.





The GPU block had its first encounter with the dremel, still a long way to go for a perfect fit.


See you guys soon!
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 25th Jan 2013, 01:34   #10
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by B.o.B View Post
Very stylish and clean build so far. I love seeing these kinds of builds in a small case!

sub'd
Thank you for the sub! :-)

Quote:
Originally Posted by KidMod-Southpaw View Post
This is just, amazing! Love every aspect of it!
Thank you, sir!

Quote:
Originally Posted by Kranik View Post
This is a fantastic project. Great inspiration for someone that wants to make a m-ITX water cooling build after a build in a Phantom! It's perfect!
It's been a long time now, did you get around to making it? Cheers! :-)

Quote:
Originally Posted by rak500 View Post
That is a very tight fit! I really like the midplate idea!
Thank you!

Quote:
Originally Posted by SkyThread View Post
Looks very good, but I'm wondering if you will get enough cooling for it.
To be honest, I don't know. I think it comes down to the overclocking. I did some calculations and it seems to work out, I had another set of eyes on it and he agreed but I really don't know until it's up an running.

Quote:
Originally Posted by AT0MAC View Post
Maybe you can help me, I wonder what the height is of the case without the feet on? I want to buy this and place it under my TV were I only have a height of 30cm
Sorry for the really late answer, but the height is 31,5 cm.

Quote:
Originally Posted by Fonne View Post
That rad + fan combo looks amazing ... A shame they dont really got any static pressure, but the look is soooooo nice
Hopefully I can get enough out of it, but we'll see!


Part VI

It's been a loooong time since I last stepped into this thread, that plus a midset break or what ever you would wan't to call it, for school I'm back to finish what I've started.

As she sits!


[/IMG]













Here's where I will put a 20mm fan.


Or a fillport!


Got myself a pair of wedding rings for that sweetheart.




Flush!




Kind of tight, hopefully it will do.


Halfway finished with the front radiator mount.




SSD-holder with two yummy GT-disks.




Threw the radiator on there, starting to look like something.


Again, starting to look right!


The rear, lots of work to do here still.






It's not as bad as it looks to be, one set of wires are not yet sleeved, and the others need a good stretch, but it will look better once the PSU-shroud is on.






Test mounting!




What do we think?




No longer a 460!


Lowered the entire reservoir about 5mm, through the floor.







Hopefully I'll be back really soon to update you guys on progress.
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 25th Jan 2013, 02:30   #11
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by jrs77 View Post
Let's talk about tight spacing between components
Typing this with only one hand, kind of got the other one stuck. :-D

Quote:
Originally Posted by Sissilisko View Post
Im in love... with you're case.... and you're skills that is THE most tightest **** ive ever seen please, show me more... sensei.
Wow, thank you so much!

Just because you two are so kind and welcoming, you get another one!



Part VII

I got an Aquaero as some sort of "main central" of all the mechanical components. But it doesn't fit! Just 1mm to tall, shouldn't be a hard fix though.

Also mounted a water temperature gauge/reader to utilize more of the Aquaero. Since last time the rad support in the front was painted, pump wire lengthened, the fan wires resoldered and shortened, as well as shortening the probe wires and USB. Don't worry, all connectors will be painted.

Oh, and I also made some splitters for the molex lines, and finished off the sata-power. It still needs some fine tuning though, as you can tell.

















__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 1st Feb 2013, 12:08   #12
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by Furball Zen View Post
Coming along nicely
I'm glad you like it, Zen!

Quote:
Originally Posted by Parge View Post
I'm not sure what I like better, the mod or the photography!
I'm not sure I want to know! Haha! :-D

Quote:
Originally Posted by Mankz View Post
A cracking little project, thats for sure.
Thank you, Mankz!

Quote:
Originally Posted by craig - toyoracer View Post
Great to see this back in progress mode

It's all in the details and you have soooooo many
It's nice to be back. It's hard to get it the way I want to, and it's so time consuming because of the space, or rather the lack of it. Thank you as always, Craig!

Part VIII

Windowtime! Also got working a bit more on the two-tone paint.











Marked areas will need some love.


And some nicer shots, because I finally found some time for it.




It came out pretty good in my opinion.










Now I'm off to work some more on this! Until next time, thank you for following. :-)
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 1st Feb 2013, 14:08   #13
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by jeckulz View Post
Late sub
You know what they say! A late sub is a.. great sub.. ehrm..

I'll get back to you on that one!

Quote:
Originally Posted by Maki role View Post
This build is spectacular! I love how everything is just so compact, yet still clean. Good luck in MotM!
Thank you very much, Maki! I'm glad you appreciate it, it means a lot. :-)

I already got my votes down for the MOTM, that Macchiato is quite the looker! I hope you guys voted on your favs already, too. :-)
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 23rd May 2013, 02:29   #14
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by phinix View Post
Let's pull it up... I'm not good in terms of frequent updates but 3 months?
Time really flies by! I've been working on it frequently, but I guess I'm pretty much the worlds worst updater. :-D


Part IX

So, it was time to take a turn with the design in this one. It was far to bottom heavy, lacking something to bind it together.

The whole visible area of this build will feature acrylic tubing.








Enjoy!
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 15th Apr 2014, 23:03   #15
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
I'm sorry about the lack of updates first of all, but I wanted to get this thing finished and have it up and running before focusing at all on the logs.

This is now done, and these are the 'lost updates' of the project. Yeah, that sounds plausible, haha.

Part X












Here you can see the problem, it hits quite badly.


Away with you!


It will get soldered back in this position using wires.


Got a bit of work done. This is the preliminary routing of the bottom part. I don't really like the double 90 situation, maybe there is something to be done about that.





__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 15th Apr 2014, 23:03   #16
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Part XI
























What is left of the 5,25" bay.



The rubber lining is just there to protect the glass during transport.




A little bit further, configuring the light installation.





What a mess! Diving into it again.



Hopefully I can put the GPU and motherboard into this and fill it up. Hopefully.





__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 15th Apr 2014, 23:04   #17
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Part XII


A little, ventilated, cover since there is no way to fit the USB-ports back in.








Protective padding for the GPU, against the front radiator which I was having problems with before.




Finally got the other radiator in!







Got the top fitted and the last of the wires somewhat routed, it'll look cleaner once they are hooked up I think.






I wish the hidden cable routing would have been cleaner, but there is literally no room for any mounts or shorter cables, it was a pain already.

So this is how the SSD's look when mounted. Two 120GB drives in raid-something-something. Stripped of their cases and insulated with biiig heat shrink around it all for durability.




GPU in place after 3 hours or something like that. It was until I realized that the back of the casing was fitted with screws earlier and it simple opened up like a book. Just slide it in - Well, not just.




Some fiddling with the wires for the GPU, don't know how much of it will be visible.

__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 15th Apr 2014, 23:05   #18
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Part XIII


Sometimes things doesn't align the way you wanted them to. This was one of those times, somewhere along the line I was a bit clumsy and measured some things a bit weird.

I got the situation handled though, but it was an unnecessary change to the design. Maybe it adds character, I don't know.


I now have a spacer, a 90 degree rotary and a 45 degree rotary on the radiator in the back, and changed the 90 degree rotary in the front to a regular 90 degree fitting.













I think that I sorted out the last of the alignment issues, well, still some tweaking around the radiator area but other than that.

I don't know why, but I kind of like the quirkiness of these adjustments with the alignment, not sure if character is the right word but I think it being 'perfect' would take away from its charm.. Maybe?
Anyways, I bent the tube a few degrees on the right hand side of the CPU and she's straight like an arrow on the whole.



The task this evening will be to get some order out of the ATX 24.





















__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 15th Apr 2014, 23:06   #19
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Part XIV


Now, sensitive people look away, haha! I started work on version 1.1. Or 2.0. Or which ever version that doesn't leak.



So many hours later, I got this to show you. It's wiped down and might be a little bit wet in the pictures.

What's left now is filling it, some cable management, touch up on the paint in places that got scuffed. And the side panel, but I've been working on that off camera!







In short; fixed some issues with the Aquaero, rewired start and reset buttons, extended a fan cable, changed around some fittings for increased safety and insulated the hidden connections. I also exchanged a few tubes with new ones and re-seated a couple of worn out o-rings. It should work fine now.



















Lian Li PC-V1000 vs PC-Q11!





__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Old 29th Apr 2014, 04:30   #20
Laine
This and that
 
Join Date: Dec 2010
Posts: 44
Laine has yet to learn the way of the Dremel
Quote:
Originally Posted by Concept73 View Post
Perfect Laine, i do love small builds, require such attention to detail! and this is gorgeous!
Thank you! Very glad to hear that you like it, there is something special about working with SFF. This will not be the last one, that's for sure. (Even though the contrary was mentioned quite a few times during, lol!)

Quote:
Originally Posted by Ocelot View Post
There is something special about super compact builds. Fantastic work.

Definitely a MOTM contender.
Thank you a bunch, Ocelot! There is also a line to cross where compact just gets too compact, almost cluttered and I'm really close to passing it on this build, if not already crossed. If there was one thing I could do over, it would be the space/size of the case. A little bit more air would not have hurt the design aspect to be honest.

Still, very happy that you enjoyed it!

Quote:
Originally Posted by phinix View Post
LOVE IT.
Fantastic little build. I admired it from the beginning.
Simply - sweet little build
I'm sorry that it took such a long time, especially since you have witnessed it all the way back from the beginning. I'm very honored that you decided to stick around, and that you like it!

Quote:
Originally Posted by Yadda View Post
Wow, neat and efficient use of space. It fits together very nicely and looks great too.
Yadda, thank you for your kind words! Seeing and sharing this, passion almost, for compact SFFs really makes me keep on modding.

Quote:
Originally Posted by KidMod-Southpaw View Post
What do you know? It got even better!
Thank you! The final photos are still to come, personally I think it looks a bit cooler on those. We'll just have to wait and see.

Quote:
Originally Posted by HackJoe View Post
Great work, such a tight working space. You've done a brilliant job, certainly a build worthy of acclaim.

J.
Thank you, Joe! It was a bit of a struggle, I don't want to lie. It would probably not have taken even half the time it did if it wasn't for the stubbornness regarding the size. Something to take with me for the next builds, I guess. Again, it really feels good seeing you enjoy it, it makes it worthwhile.

Quote:
Originally Posted by imersa View Post
Mod update on front page led me here! Nice, I missed this project and love it. SFF rules good job.
Thank you for mentioning, I had totally missed it. Don't think I didn't see you on there too! Amazing build, lovely cases and the design is something else! SFF! Haha.

Quote:
Originally Posted by -MisterX- View Post
Very nice build! Love the style of the window=)
Thank you! I'm glad you like it!

Quote:
Originally Posted by C4B12 View Post
Laine, you basterd!
Johan! Let's fight it out! Lol!



Okay, so on to.. Hmm, an update kind of. Sadly the posting of the final shoot is postponed until a later date.

But, I don't want to keep you waiting without at least some material, so here's an older one.



Thank you again for all of the nice comments! Really means a lot.
__________________
Current Bit-Tech project log: [Inet 001 - Codename Mono]

[Curreal] - [Simplicity] - [Purple Haze] - [Red Wine] - [Malay] - [Nano]
Laine is offline   Reply With Quote
Reply

Thread Tools
View Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:13.
Powered by: vBulletin Version 3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.