bit-tech.net

Nutman · 20th Jan 2013, 02:35

Nice!

Dave2010_TA · 22nd Jan 2013, 18:37

Quote:

Originally Posted by Nutman

Nice!

Thank you Nut!!!

Dave2010_TA · 22nd Jan 2013, 18:40

Wake up early today, I reinstalled the trays after being tapped for good and satin with fine sandpaper.
This time I put a dot of glue between the glass and gasket just to hold it against the glass.
I reinstalled the SSD with the pieces reduced and the new mask for filters Aquacomputer: receipts for the filters are able to reconstruct the millimeter and filters fit like a glove.

The boy 4rm oz · 22nd Jan 2013, 22:52

Fantastic work Dave! I really do love the reservoirs, you should look at selling them

.

Dave2010_TA · 23rd Jan 2013, 08:51

Quote:

Originally Posted by The boy 4rm oz

Fantastic work Dave! I really do love the reservoirs, you should look at selling them

.

Eheh thank you very much!! I'll think to sell them

Dave2010_TA · 23rd Jan 2013, 14:47

Mmm, the mask of Aquaero, it's better black, or steel?

What do you think about?

The boy 4rm oz · 23rd Jan 2013, 22:43

I like the raw front on the aquaero, helps it blend in. Considering the other aqua computers controller is black though it doesn't look too bad in black either.

Nutman · 23rd Jan 2013, 23:33

Yup, I think the raw front works best in this case, too.

KoSoVaR^ · 24th Jan 2013, 15:58

Steel, but why arnt yopu doing a faceplate in one big piece with cutouts for all of the other panels and accessories ? would be so much nicer !

siliconfanatic · 24th Jan 2013, 23:17

I wish i could afford two of those pumps!

May i ask what the diameter of the mounting plates is? Looks great so far!

Dave2010_TA · 28th Jan 2013, 11:22

Quote:

Originally Posted by The boy 4rm oz

I like the raw front on the aquaero, helps it blend in. Considering the other aqua computers controller is black though it doesn't look too bad in black either.

Quote:

Originally Posted by Nutman

Yup, I think the raw front works best in this case, too.

Thank you guys!!!

Quote:

Originally Posted by KoSoVaR^

Steel, but why arnt yopu doing a faceplate in one big piece with cutouts for all of the other panels and accessories ? would be so much nicer !

I thought about it, but I had problems with the fittings inside the case.

Quote:

Originally Posted by siliconfanatic

I wish i could afford two of those pumps!

May i ask what the diameter of the mounting plates is? Looks great so far!

What diameter do you need? I don't understand.

Dave2010_TA · 28th Jan 2013, 11:25

Good morning guys, I fixed the glass of the pumps. The glass is fixed with silicon, and it's very strong. In the week I hope that the Aquacomputer waterblock for the GTX670 will arrive, to start mounting the liquid cooling system.

Mankz · 28th Jan 2013, 11:27

Im really liking that front panel design

Dave2010_TA · 28th Jan 2013, 11:32

Quote:

Originally Posted by Mankz

Im really liking that front panel design

Thank you Mankz!!!

jokkos · 28th Jan 2013, 11:53

wow...

I just LOVE the look of that glass... it's really unique! Great work...

Dave2010_TA · 28th Jan 2013, 12:48

Thank you jokkos!!!

Sissilisko · 28th Jan 2013, 14:02

i believe you are going to paint those metal pieces from front and inside cause then that would look bollen! (i don't know if i said that right) but looking really good

Dave2010_TA · 28th Jan 2013, 15:09

Quote:

Originally Posted by Sissilisko

i believe you are going to paint those metal pieces from front and inside cause then that would look bollen! (i don't know if i said that right) but looking really good

No, I won't paint the steel, because I like too much the steel color! The name of the mod is Glass&Steel, so I must keep the steel color of the panels. Also, I think that I'll paint the passive radiators with opaque black.

siliconfanatic · 28th Jan 2013, 19:50

Quote:

Originally Posted by Dave2010_TA

What diameter do you need? I don't understand.

Sorry i didn't clarify... I mustve wandered off in my thoughts

... not an unknown occurance with me

I meant to ask the diameter of the outermost plates for the resrvoirs... Working on something similair and I can't seem to get the proportions of the diameters to look just right... Even with two top of the line 3d programs on the same rig it's driving me nuts!

Dave2010_TA · 29th Jan 2013, 07:10

Quote:

Originally Posted by siliconfanatic

Sorry i didn't clarify... I mustve wandered off in my thoughts

... not an unknown occurance with me

I meant to ask the diameter of the outermost plates for the resrvoirs... Working on something similair and I can't seem to get the proportions of the diameters to look just right... Even with two top of the line 3d programs on the same rig it's driving me nuts!

Ooook no problem man!!
Ok the diameter is sixty millimeters

20th Jan 2013, 02:35	#141
Nutman Never stuck with stock@Hotmods.net Join Date: Oct 2008 Location: Roskilde, Denmark Posts: 2,175	Nice! __________________ Best regards, Nutman Project: Nutman - Sponsored by: Coolerkit - Specialtech - EK Waterblocks

22nd Jan 2013, 18:40	#143
Dave2010_TA Multimodder Join Date: Feb 2012 Location: Milano Posts: 219	Wake up early today, I reinstalled the trays after being tapped for good and satin with fine sandpaper. This time I put a dot of glue between the glass and gasket just to hold it against the glass. I reinstalled the SSD with the pieces reduced and the new mask for filters Aquacomputer: receipts for the filters are able to reconstruct the millimeter and filters fit like a glove. __________________ DAVE'S MOD My GBW Obsidian 800D - My Glass & Steel Orange Graphite 600T - CM Cosmos II Modern Facebook Page & WEBSITE https://www.facebook.com/Dave2010Techarena - http://dave2010techarena.weebly.com/

22nd Jan 2013, 22:52	#144
The boy 4rm oz Project: Elegant-Li Join Date: Apr 2008 Location: Balhannah, South Australia Posts: 5,286	Fantastic work Dave! I really do love the reservoirs, you should look at selling them . __________________ Project: Elegant-Li NEW Project: Alpha FINISHED Project: LEXA Revival FINISHED Project: LEXA FINISHED MOTM Nominee October 08 *FOR SALE*

23rd Jan 2013, 14:47	#146
Dave2010_TA Multimodder Join Date: Feb 2012 Location: Milano Posts: 219	Mmm, the mask of Aquaero, it's better black, or steel? What do you think about? __________________ DAVE'S MOD My GBW Obsidian 800D - My Glass & Steel Orange Graphite 600T - CM Cosmos II Modern Facebook Page & WEBSITE https://www.facebook.com/Dave2010Techarena - http://dave2010techarena.weebly.com/

23rd Jan 2013, 22:43	#147
The boy 4rm oz Project: Elegant-Li Join Date: Apr 2008 Location: Balhannah, South Australia Posts: 5,286	I like the raw front on the aquaero, helps it blend in. Considering the other aqua computers controller is black though it doesn't look too bad in black either. __________________ Project: Elegant-Li NEW Project: Alpha FINISHED Project: LEXA Revival FINISHED Project: LEXA FINISHED MOTM Nominee October 08 *FOR SALE*

bit-tech.net

Site Links

Our Other Sites

23rd Jan 2013, 23:33	#148
Nutman Never stuck with stock@Hotmods.net Join Date: Oct 2008 Location: Roskilde, Denmark Posts: 2,175	Yup, I think the raw front works best in this case, too. __________________ Best regards, Nutman Project: Nutman - Sponsored by: Coolerkit - Specialtech - EK Waterblocks

24th Jan 2013, 15:58	#149
KoSoVaR^ Professional Sleever & Modder Join Date: Dec 2010 Location: Sweden Posts: 919	Steel, but why arnt yopu doing a faceplate in one big piece with cutouts for all of the other panels and accessories ? would be so much nicer ! __________________ Project Chocolate Temptation Project MonoBits KosovarMods - Facebookpage

28th Jan 2013, 11:25	#152
Dave2010_TA Multimodder Join Date: Feb 2012 Location: Milano Posts: 219	Good morning guys, I fixed the glass of the pumps. The glass is fixed with silicon, and it's very strong. In the week I hope that the Aquacomputer waterblock for the GTX670 will arrive, to start mounting the liquid cooling system. __________________ DAVE'S MOD My GBW Obsidian 800D - My Glass & Steel Orange Graphite 600T - CM Cosmos II Modern Facebook Page & WEBSITE https://www.facebook.com/Dave2010Techarena - http://dave2010techarena.weebly.com/

28th Jan 2013, 11:27	#153
Mankz dat steak Join Date: Jan 2006 Location: SW1H Posts: 13,519	Im really liking that front panel design

28th Jan 2013, 11:53	#155
jokkos Belgian beer modder Join Date: May 2005 Location: Belgium Posts: 1,023	wow... I just LOVE the look of that glass... it's really unique! Great work... __________________ Der_Meister: 100% completed, again... project log here.

28th Jan 2013, 12:48	#156
Dave2010_TA Multimodder Join Date: Feb 2012 Location: Milano Posts: 219	Thank you jokkos!!! __________________ DAVE'S MOD My GBW Obsidian 800D - My Glass & Steel Orange Graphite 600T - CM Cosmos II Modern Facebook Page & WEBSITE https://www.facebook.com/Dave2010Techarena - http://dave2010techarena.weebly.com/

28th Jan 2013, 14:02	#157
Sissilisko Multimodder Join Date: Apr 2012 Location: Kajaani, Finland Posts: 87	i believe you are going to paint those metal pieces from front and inside cause then that would look bollen! (i don't know if i said that right) but looking really good __________________ Finished: -Mini-PC http://forums.bit-tech.net/showthread.php?t=248203 unfinished: none!

Thread Tools
Show Printable Version Email this Page
View Mode
View Author's Posts View All Posts